Replaces the electric steps, motor, and control unit for your Kwikee 25 series RV steps. Motor and control unit automatically extend and retract the steps when you open and close your door. Wiring pigtail hardwires to your RV's power.Features: Replaces the steps, motor, and control unit for your Kwikee 25 series steps Switch kit (LC369311) for extension override sold separately Motor works with gearbox to extend and retract the steps Control unit connects steps and step light to the opening and closing of the RV door Amber incandescent light illuminates steps to make them easy to see at night Integrated safety features help prevent damage to the steps Motor retracts the steps if they strike an obstacle during extension Ignition override retracts the steps when the vehicle's engine is started Non-slip tread and easy-to-see reflective strips on step surface Sturdy, powder coated steel construction with weatherproof wiring withstands the elements Solid steel drive rods and stainless steel bushings provide additional durability Air pressed rivets at pivot points ensure long-term strength Simple installation with existing mounting holes and wiring harness Hardware sold separately Made in the USA Specs: Extended height: 21-7/8" Folded height: 9-7/8" Overall width: 25-1/2" Mounting plate dimensions: 23-3/4" wide x 11-3/8" deep Bolt pattern: 22" wide x 8" deep Step dimensions: 24" wide x 11-1/8" deep Drop/Rise: 8" Voltage: 12V Control unit amperage: 10A Light bulb type: C193, incandescent Control unit wire gauge: Green: 12 AWG Purple: 16 AWG Weight capacity: 300 lbs 1-Year warranty Note: This step assembly includes the steps, motor, and control unit only.
Hitch cargo carrier lets you haul your gear on family trips, weekend getaways, and on the job. 22" Sidewalls with a lockable lid and cargo bag keep firewood, luggage, and other gear contained and secure. Carrier folds up for storage.Features: Hitch-mounted cargo carrier with high sidewalls is perfect for family trips, weekend getaways, and on the job Holds camping supplies, firewood, luggage, hunting and fishing gear, a generator, and other cargo Tall, independently framed sidewalls provide more vertical load support when compared with carriers with short side rails Fold outward for effortless loading and unloading Fold down for easy storage and access to the rear of your vehicle Lockable lid minimizes the need for cargo nets, straps, bungees or other tie-downs Deters theft when used with a padlock (sold separately) with a 3/8" diameter shackle Mounts to Carpod sidewalls with built-in brackets Carrier folds up against vehicle for easy storage Remove shank pin, tilt carrier up, and reinsert pin Red reflectors at corners make carrier visible at night Durable, black polyester bag provides privacy and weather-resistant storage for your cargo Built-in straps secure bag to Carpod sidewalls to prevent the bag from shifting 2 Covered zippers on top of bag provide easy access to your gear 54" Long strap is included to secure sidewalls in place in folded position Can also be used to anchor lid to carrier Hitch lock or pin and clip (sold separately) required to secure carrier to hitch 1-Piece, welded steel construction with black powder coat finish is strong and corrosion resistant Specs: Application: 2" x 2" trailer hitch receivers Storage capacity: 13.25 cu ft of storage space Weight capacity: 450 lbs Overall dimensions: 48-3/4" long x 24" wide x 22" tall Platform dimensions: 47" long x 23" wide x 21-7/8" tall Folded dimensions: 48" wide x 5-1/4" tall Lid dimensions: 43-1/8" long x 23-3/8" wide Bag dimensions: 46" long x 22" wide x 22" tall Distance from the center of the hitch pin hole to the closest edge of the carrier: 4" Note: This distance is shorter than most other hitch-mounted cargo carriers.
24x48 Outside dimensions. Hitch-mounted cargo carrier provides more than 13 cu ft of storage space for your gear. The sturdy steel carrier has 4 sidewalls that provide vertical load support and fold down for easy cargo loading and convenient storage.Features: Versatile, hitch-mounted carrier is perfect for hauling cargo of all shapes and sizes Great for camping supplies, firewood, luggage, hunting and fishing gear, and more Tall, independently framed sidewalls keep cargo contained and provide vertical load support during transport Fold outward for effortless loading and unloading Fold down for easy storage and access to the rear of your vehicle 1-Piece, welded base frame is lightweight yet strong Thick, galvanized steel tubing Fixed shank provides added strength and support Black powder coat finish resists rust, corrosion, and chipping Corner reflectors ensure nighttime visibility Adjustable strap is included to secure gear or to hold the lid (sold separately) in place Lockable lid (M2201) and cargo bag (M2202) sold separately Hitch lock or hitch pin and clip sold separately Specs: Application: 2" x 2" trailer hitch receivers Storage capacity: 13.25 cu ft Weight capacity: 450 lbs Outside dimensions: 48-3/4" long x 24" wide x 22" tall Inside dimensions: 47" long x 23" wide x 21-7/8" tall Folded dimensions: 48" wide x 5-1/4" tall Distance from center of hitch pin hole to closest edge of carrier: 4" Note: This distance is shorter than for most other hitch-mounted cargo carriers.
This custom-fit base plate kit lets you hook up your tow bar to your vehicle. No external crossbar means that only the base plate tabs are visible. Simple bolt-on installation with included hardware.Features: Custom-fit base plates provide attachment points for your tow bar Hidden reinforcement means that less of the bracket shows No crossbar support beam or large, protruding brackets Tab covers provide a clean look for your car Sturdy, dependable design Spreads towing force evenly to minimize weight placed on suspension Constructed of durable steel Simple installation - no welding required Bolts securely to your vehicle's chassis Electrical bracket lets you easily mount a round electrical connector plug Instructions and necessary hardware included Compatible with all Demco tow bars Adaptable for use with tow bars from other manufacturers (adapters sold separately) Made in the USA Specs: Distance between brackets: 29-1/2" Bracket height: 21-7/8" 1-Year limited warranty Tab Covers When you're not towing, the included tab covers provide a clean look for your car by covering the protruding brackets.
24x48 Outside dimensions. Hitch-mounted cargo carrier with lockable lid offers 13 cu ft of storage space for your gear. Sturdy steel carrier has 4 sidewalls that provide vertical load support and fold down for easy loading and convenient storage.Features: Versatile, hitch-mounted cargo carrier with lockable lid is perfect for hauling cargo of all shapes and sizes Great for camping supplies, firewood, luggage, hunting and fishing gear, and more Tall, independently framed sidewalls keep cargo contained and provide vertical load support during transport Fold outward for effortless loading and unloading Fold down for easy storage and access to the rear of your vehicle Lockable lid minimizes the need for cargo nets or tie-down straps Deters theft when used with a padlock (sold separately) with a 3/8" diameter shackle Mounts to Carpod sidewalls with built-in brackets 1-Piece, welded base frame is lightweight yet strong Fixed shank provides added strength and support Thick, galvanized steel tubing holds up against abuse Black powder coat finish resists rust, corrosion, and chipping Corner reflectors ensure nighttime visibility Adjustable strap is included to secure gear or to hold the lid in place Cargo bag (M2202) sold separately Hitch lock or hitch pin and clip sold separately Specs: Application: 2" x 2" trailer hitch receivers Storage capacity: 13.25 cu ft Weight capacity: 450 lbs Outside dimensions: 48-3/4" long x 24" wide x 22" tall Inside dimensions: 47" long x 23" wide x 21-7/8" tall Folded dimensions: 48" wide x 5-1/4" tall Lid dimensions: 43-1/8" long x 23-3/8" wide Distance from center of hitch pin hole to closest edge of carrier: 4" Note: This distance is shorter than for most other hitch-mounted cargo carriers.
Perfect for off-center loads such as slide-in campers, this electric, dual-gauge control in your cab levels one set of springs independently or two pairs equally with the flick of a switch. Kit includes a standard-duty compressor.
This locking carrier lets you transport 3 fat skis or 2 snowboards on your roof rack crossbars. Cradles click as they are closed to ensure skis are secure. Memory Mount system makes the carrier easy to install and remove.Features: Roof-mounted carrier lets you transport 3 fat skis or 2 snowboards on your crossbars Large push buttons let you easily open carrier even while wearing gloves Audible indicators ensure your cargo is secure in the cradles For thick skis, press cradles closed until they click once For thin skis, press cradles closed until they click twice Soft padding protects your cargo during transport Locking covers secure your gear to the carrier Memory Mount hardware offers easy, tool-free installation with no adapters required Set carrier on crossbars, tighten clamps, and close levers Clamps "remember" your crossbars after initial setup - no further adjustment needed Constructed of durable plastic and rustproof aluminum Specs: Carrying capacity: 3 fat skis or 2 snowboards Application: round, square, aero, elliptical, and most factory crossbars Recommended crossbar spread: 29-1/2" Maximum thickness of stacked skis or snowboards: 2" Usable interior pad length: 14-5/8" Overall dimensions: 21-7/8" long x 7-1/4" tall Carrier weight: 10 lbs Limited lifetime warranty Note: Skis and snowboards may need to be stacked base-to-base depending on their width.
3-Bike trunk rack is perfect for riders who occasionally take family or friends out to the trail. Quick-release hubs let you adjust the rack to fit your trunk and anti-sway cradles reduce bike movement. Includes cable lock.Features: Hanging bike rack lets you carry 3 bikes on your vehicle's trunk Fits over most types of spoilers 2 Arms with padded, anti-sway cradles and rubber straps secure bikes by the frame 4 Quick-release hubs ensure optimal arm angle and a proper fit to your trunk Also allow arms to fold down for compact storage 6 Cam-buckle straps with rubber-coated hooks secure rack to your vehicle Rubber foot pads protect your vehicle from damage Integrated cable lock deters theft of your bikes Anti-sway strap reduces movement of handlebars and wheels Reflectors on arms increase nighttime visibility Durable steel construction with black powder coat is rust resistant Specs: Carrying capacity: 3 bikes Weight capacity: 33 lbs per bike Distance between rack arms (outside to outside): 13-3/4" Space between bike carrier cradles (inside to inside): 4-1/2" Dimensions (when opened): 44-1/4" wide x 36-1/2" deep x 31-3/4" long Dimensions (when folded): 21-7/8" wide x 6-1/2" deep x 31-3/4" long Carrier weight: 15 lbs Limited lifetime warranty
You don't need some oversized storage system - just a simple way to keep your skis organized. This wall-mounted rack even has padded hooks to keep them safe. No more clutter, no wasted space - just a practical solution that gets the job done.Specs Capacity: 4 pairs of skis & poles or 4 boards Overall weight capacity: 11 lbs Dimensions and weight: 21-7/8" long x 4-1/2" wide x 3-5/8" tall 3.1 lbs Construction: Stand: black powder coated steel Hooks: padded foam Warranty: 1-Year limited
You're winding down after a long drive, lights low, favorite book in hand. This pendant casts a warm glow over the dinette, stylish without trying too hard. It feels like home, not an RV.Indoor Use Only: Great for kitchens, dinettes, or lounge areas. Specs Dimensions: Overall length: 21-7/8" Overall width: 6-3/4" Lighting Specs: Wattage: 3.5W Voltage: 12V DC Color temperature: 4000K Mount type: ceiling surface mount Bulb type: integrated LED Installation: bolt-on ceiling installation, hardware not included
22" x 1". Low-profile LED utility light provides bright light to an interior space. Durable polycarbonate housing and lens. Surface mount - hardware not included. 2-Wire design. 27 Diodes.Features: Low-profile LED light strip provides bright light to illuminate an interior space Thinline Series has a low profile so that light can fit in tight spaces LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brigther light with less power output No bulbs to replace - no brittle filaments Sonically sealed, waterproof housing and lens Durable polycarbonate housing and lens Clear lens with white LEDs Compatible with 12V DC systems Surfacce mount - hardware not included 2-Wire design - includes ground wire and lead wire for power Specs: Overall dimensions: 21-7/8" long x 1" wide x 5/8" thick Distance between mounting holes (center on center): 21-9/32" apart on center Light output: Effective lumen output: 513 Raw lumen output: 567 Diodes: 27 Power draw at 12.8V: 0.480 amps Lifetime warranty on LEDs Raw Lumens vs.
Quiet mornings and calm water are what boating is about, not worrying if your anchor will hold. This anchor takes the stress out of staying put, so you can enjoy the water instead of fighting with your gear when its time to move on.The flat profile gives you room to breathe. Specs Size and Build Overall dimensions: 21" wide x 21-7/8" tall Pivoting flukes: 12" wide x 12" tall Size: #13 Material: galvanized steel
This wiring harness replaces a damaged wiring harness for Firestone Level Command I and II and Dual Electric Air Command I and II air spring control systems. Harness includes a relay and 20-amp fuse.
Triple LED tail light serves 3 functions: brake, tail, and turn. Clear lens with 33 colored diodes. Fully sealed, waterproof construction. Mounts flush into the body of your RV or trailer.Features: Low-profile tail light serves 3 functions: Turn signal light Tail light Brake light Sonically sealed, waterproof housing and lens unit is submersible Clear polycarbonate lens over red and amber LEDs LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows improved heat distribution and thinner construction Weather-resistant black plastic housing Flush-mount design provides a smooth, sleek look - hardware not included Hardwire connection points on back of light require splicing into your existing wiring DOT compliant Meets FMVSS 108 and CMVSS requirements for automotive lighting Specs: Configuration: passenger's side (right-hand side) Overall dimensions: 12-7/8" wide x 21-7/8" tall x 1-3/4" deep Diodes: 33 Power draw at 12.8 volts: Tail light: 0.08 amps Stop/turn light: 1.15 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
We paired the Gravity ski and snowboard carrier with the adapters you need to mount it on your Inno Quick Base System. Secures to the tray with no tools required, making it easy to swap out accessories.Features: Carrier lets you transport 3 pairs of skis or 2 snowboards on your Inno Quick Base system (sold separately) Mounts to tray with included adapters Easily detaches when it's time to swap out accessories Large push buttons let you easily open carrier even while wearing gloves Audible clicks let you know your cargo is secure in the cradles For thick skis, press cradles closed until they click once For thin skis, press cradles closed until they click twice Soft padding protects your cargo during transport Locking covers secure your skis to the carrier Specs: Carrying capacity: 3 pairs of skis or 2 snowboards Application: Inno Quick Base system Maximum thickness of stacked skis or snowboards: 2" Usable interior pad length (each): 14-5/8" Dimensions: 21-7/8" long x 7-1/4" tall Carrier weight: 10 lbs Construction: matte black aluminum Limited lifetime warranty Note: Skis and snowboards may need to be stacked base-to-base depending on their width.
Easily reach your vehicle's roof with this unique, removable step. Simply place the arms over your tire and adjust to fit, and you'll have a stable platform that supports up to 400 lbs. Fits tires up to 12-1/2" wide.Features: Provides sturdy platform so that you can step up to reach your roof-mounted cargo carrier, wash your windshield, work under your hood and more Designed for SUVs, motor homes and light-duty trucks Adjusts up to 8" in height for just a little lift or a lot Mounts on either front or rear tire quickly and easily Arms hook around tire and adjust up to 4" for a tight fit Offers a non-slip, diamond tread step area Folds flat for easy storage Included bag keeps step clean and scratch free Comes fully assembled Constructed of durable steel with a black powder coat finish that resists corrosion Specs: Application: tires up to 12-1/2" wide Step dimensions: 21-7/8" wide x 8-1/2" deep Capacity: 400 lbs 1-Year limited warranty
Replaces a damaged mounting bracket for a Firestone dual-function air spring control panel. Air gauge and switch from control panel fit into bracket so that they can be mounted to vehicle's dash.
If your vehicle's rear hatch keeps closing while you're unloading cargo, it's time to change your strut. Replace it with this custom fit gas strut and make your hatch door operate like new again. Quick, tool-free installation.Features: Gas strut replaces a worn out or damaged strut on your vehicle's rear hatch door Damping groove inside tube prevents bouncing - provides smooth operation in any temperature Extends the rod from the tube to open the hatch door and hold it in place Compresses the rod slowly to close the door without slamming shut Internal wiper prevents sticking and reduces friction by lubricating the rod with oil Quick, tool-free installation - connects directly to your vehicle's OEM fittings Black powder coated steel tube and nitrate coated rod are rust resistant Specs: Quantity: 1 gas strut Connection type: Body connection: bracket Shaft connection: loop mount Length: Extended length: 21-7/8" Compressed length: 13-1/4" Limited lifetime warranty Note: Always replace your struts in pairs, where applicable. Failure to replace both struts can result in a warped or damaged hinge.
If your vehicle's liftgate keeps closing while you're unloading cargo, it's time to change your strut. Replace it with this custom fit gas strut and make your liftgate operate like new again. Quick, tool-free installation.Features: Gas strut replaces a worn out or damaged strut on your vehicle's liftgate Damping groove inside tube prevents bouncing - provides smooth operation in any temperature Extends the rod from the tube to open the liftgate and hold it in place Compresses the rod slowly to close the liftgate without slamming shut Internal wiper prevents sticking and reduces friction by lubricating the rod with oil Quick, tool-free installation - ball socket ends connect directly to your vehicle's OEM fittings Black powder coated steel tube and nitrate coated rod are rust resistant Specs: Quantity: 1 gas strut Connection type: ball socket Length: Extended length: 21-7/8" Compressed length: 13-3/8" Limited lifetime warranty Note: Always replace your struts in pairs, where applicable. Most liftgates have a strut on each side.
This enamel-coated grill lid is a perfect addition to your BioLite FirePit+. Air vents are adjustable for more even cooking and heat regulation. Handles are heat resistant and flip down for storage.Features: Cook faster and more evenly with this grill lid Perfect for your BioLite FirePit+ (sold separately) Air vents are adjustable to help regulate heat and cook evenly Handles are heat resistant and flip down for storage Durable, enamel-coated steel is rust resistant Specs: Dimensions: 21-7/8" long x 12-3/4" wide x 6-1/4" tall Weight: 5 lbs 1-Year warranty
Custom designed to fit your vehicle so it can be safely towed behind your RV, this base plate has easily removable arms that offer a seamless look when you're not flat towing. Base plate bolts directly to your chassis, so no welding is required.
If your vehicle's trunk lid keeps closing while you're unloading cargo, it's time to change your strut. Replace it with this custom fit gas strut and make your lid operate like new again. Quick, tool-free installation.Features: Gas strut replaces a worn out or damaged strut on your vehicle's trunk lid Damping groove inside tube prevents bouncing - provides smooth operation in any temperature Extends the rod from the tube to open the trunk lid and hold it in place Compresses the rod slowly to close the trunk lid without slamming shut Internal wiper prevents sticking and reduces friction by lubricating the rod with oil Quick, tool-free installation - connects directly to your vehicle's OEM fittings Black powder coated steel tube and nitrate coated rod are rust resistant Specs: Quantity: 1 gas strut Connection type: ball socket Length: Extended length: 21-7/8" Compressed length: 13-1/2" Limited lifetime warranty Note: Always replace your struts in pairs, where applicable. Most trunk lids have a strut on each side.
If your vehicle's liftgate keeps closing while you're unloading cargo, it's time to change your strut. Replace it with this custom fit gas strut and make your liftgate operate like new again. Quick, tool-free installation.Features: Gas strut replaces a worn out or damaged strut on your vehicle's liftgate Damping groove inside tube prevents bouncing - provides smooth operation in any temperature Extends the rod from the tube to open the liftgate and hold it in place Compresses the rod slowly to close the liftgate without slamming shut Internal wiper prevents sticking and reduces friction by lubricating the rod with oil Quick, tool-free installation - connects directly to your vehicle's OEM fittings Black powder coated steel tube and nitrate coated rod are rust resistant Specs: Quantity: 1 gas strut Connection type: ball socket Length: Extended length: 21-7/8" Compressed length: 13-3/4" Limited lifetime warranty Note: Always replace your struts in pairs, where applicable. Most liftgates have a strut on each side.
Electric step assembly includes everything you need to automatically open and close the steps with your RV door. Motor and control unit extend and retract steps. Switch kit overrides step retraction. Amber light illuminates when steps extend.Features: Electric RV steps automatically extend when you open the door and retract when you close the door Includes everything you need - motor, control unit, switch kit, and light Motor works with gearbox to extend and retract the steps Control unit wires steps and step light to the opening and closing of the RV door Switch kit allows you to override automatic retraction and lock steps in extended position Keeps the steps out when parked, whether the door is open or closed Amber incandescent light illuminates steps to make them easy to see at night Integrated safety features help prevent damage to the steps Motor retracts the steps if they strike an obstacle during extension Ignition override retracts the steps when the vehicle's engine is started Non-slip tread and easy-to-see reflective strips on step surface Sturdy, powder coated steel construction with weatherproof wiring withstands the elements Solid steel drive rods and stainless steel bushings provide additional durability Air pressed rivets at pivot points ensure long-term strength Simple installation with existing mounting holes and wiring harness Hardware sold separately Made in the USA Specs: Extended height: 21-7/8" Folded height: 9-7/8" Overall width: 25-1/2" Mounting plate dimensions: 23-3/4" wide x 11-3/8" deep Bolt pattern: 22" wide x 8" deep Step dimensions: 24" wide x 11-1/8" deep Drop/Rise: 8" Voltage: Motor: 12V Switch kit: 250V Control unit amperage: 10A Light bulb type: C193, incandescent Control unit wire gauge: Green: 12 AWG Purple: 16 AWG Weight capacity: 300 lbs 1-Year warranty Note: This step assembly includes everything you need to install and use the steps on your RV.
Filters
