Result: tk94fr

Hey Brandon, I would strongly recommend sticking with the Tekonsha RF brake controller part #TK94FR. We know this works really well and it sounds like it worked well for you too. The Curt Echo is not reliable enough for me to really ever recommend it…

It sounds like you are trying to install the Tekonsha Prodigy RF Wireless Trailer Brake Controller part #TK94FR on a 2015 Toyota Highlander that currently has a 4-way flat trailer harness. All you need to do is install the adapter part #37185 by…

Hey Gary, yes the part #ASA33YR would work for you as this is the correct replacement mount for the WiSight which is what you have. I wish we had just the nut by itself but at this time we do not.

There's a pretty high likelihood that the Furrion ones will work fine with your Voyager monitor since these are all pretty universal. Furrion does however have two different size mounts for their different size monitors so you'd need to…

Yes, we do have the suction cup mount that you are needing for your Voyager WiSight Wireless RV Backup Camera Monitor WVOM541AP. - Replacement Suction Cup Mounting Bracket for Voyager Digital Wireless Observation System #PVOS5SCM. The Replacement…

To activate the brakes on a trailer with your 2024 Toyota Grand Highlander you'll need a 7-way connector and brake controller. To switch over from your 4-pin connector you can install the #ETBC7L. This will plug into your 4-pole connector and…

I spoke with Lippert about the mounting brackets for the Lippert On-The-Go Telescopic Ladder #LC64HD and found out that they are only sold as an OEM part. This means that only the motorhome/trailer manufacturer is able to order them so you…

Hey Rob, yes they will because all of those styles use a T10 base. So if you were wanting to use the part #DI74ZR which is a 921/906 you certainly could.

Hey Billy, you've done your research well and you are correct. Since your 2015 Toyota Highlander already has a 4-way installed, the Universal Installation Kit for Trailer Brake Controller item #ETBC7 is all you'll need to add a 7-way…

I believe we have what you're looking for in the Trailer Hub Assembly part #AH15450ECOMP which uses a LM67048 inner bearing (1.250") and a LM11949 outer bearings (0.750"). This is the only trailer hub assembly we offer which uses the…

It looks like you have the original version of the Prodigy RF, part 902501, which was updated to the newer version of the Prodigy RF TK94FR (also known as part 902502). The replacement controller #TK27FR you're looking at is for the newer model…

Hey Michael, this is a really good question but basically the Curt Echo part #C79DR interprets the taillight signals that it sees and from that can tell when you are applying the vehicle brakes which then tells the inertia sensor to start looking for…