A replacement tang-style spindle washer like part #5-101 is intended to be installed behind the castle nut and have its prongs bent down so that they prevent the castle nut from rotating on an E-Z Lube type spindle. The castle nut holds the washer in…
That is a Timken seal with the part number 171255TC, so you can use the Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 1 #58846 as the replacement or you can get a pair with part #RG06-050.
Hey Marc, yes the locking hitch pin part #WS54CR will work with the stacked Replacement Shank for Gen-Y Adjustable Ball Mount #325-GH-306 you are interested in but since would prefer the hitch pin locks to be keyed alike a better option would be the…
Hey Arron, I have the perfect solution for you with the Weigh Safe 180 Hitch 2-Ball Mount for 2" Hitch #WS64MR because it has that aluminum construction you're looking for, and the hitch balls are stainless steel so you can be confident they…
Hello Ron, thanks for reaching out. The Weigh Safe Hitch w/ Built-In Scale #WS68RR and the Replacement Hitch Platform for Weigh Safe 180 Pro 2-Ball Mounts #WS55RR do use the same shank size and pin so the ball platforms are interchangeable. The Weigh…
Hey Jeff! The Weigh Safe 180 Hitch 6" Drop Hitch w/ 2.5" Shank item #WS82CR has a 8,000 lbs towing capacity with the 2" hitch ball and a 18,500 lbs capacity with the 2-5/16" hitch ball. For a locking hitch pin you'll want the…
Hey Linda! The Weigh Safe 180 Hitch 2-Ball Mount for 2.5" Hitch #WS82CR is a great option for your farm truck because almost everything is made of aluminum. The hitch balls are actually made of stainless steel so they will be just as durable as…
Hey Philip, it looks like in the time since you asked this question you returned your #WS73RR and replaced it with the #WS63RR. Did you get what you need figured out?
Yes, Redline makes an oil cap for 9K and 10K axles, #RG04-300, that has a thread diameter of 3-1/2" and a thread pitch of 14. This oil cap will fit axles with the one piece hub and drum. You will need a 2-1/2" socket or wrench for…
I understand. It took me a minute but after I went out and looked at a pontoon boat trailer we have outside it does make sense. So at one end of the bunk board you want to attach it directly to where a bracket such as #CE10052-32G normally would…
Yes, the CE Smith Double U-Bolt Bolster and Swivel Bracket Assemblies #CE10192GA-4 will work as replacements, and you're definitely doing the right thing in replacing them due to the corrosion. You will need to use the CE Smith U-Bolts…
As the bunks will be support the weight of your pontoon boat, I always recommend getting them to the end of the transom, or as close as possible. As you mentioned using 14 foot long boards, you will want at least 4 evenly spaced support brackets per…
Filters
