Search: shank   >   Trailer Dolly   >  

Hi Robin, Yes, you can absolutely use the 2" Equal-i-zer Weight Distribution Shank #EQ90-02-4600 with the Blue Ox SwayPro Weight Distribution #BXW2000. The hole spacing on the Equal-i-zer shank is the same as the Blue Ox shank which is why…

No, I am sorry Chris it can not. The TorkLift SuperHitch Everest Weight Distribution System item #TLWD1000 can only be used with the TorkLift SuperHitch Magnum Trailer Hitches, like item #TL74FR that fits your 2024 Chevy Silverado 3500. It is…

You're welcome Chris! Sounds like you've more then got the hitch covered. I can not think of a better option then the TorkLift SuperHitch Magnum Trailer Hitch item #TL74FR. You will be able to pull anything and everything with this…

Sorry Chris but they have not. I checked with B&W and they only offer the B&W Continuum Weight Distribution Head Assembly item #BW68FR that comes with the B&W Continuum Weight Distribution System item #BW28FR.

I may have a solution for you, however the only standard spare tire carriers we have available for your trailer wheel with a 5 on 5 inch bolt pattern are U-bolt designs like the CE Smith #CE22007Z-11050-2. Another option I recommend looking at is a…

Hi Joe, I assume you are referencing an Equal-i-zer weight distribution since you have shank #EQ90-02-4700. I went ahead and read the owners manual for their systems and there is noting regarding adjusting the angle of the hitch ball. The hitch head…

The Demco Hydraulic Trailer Brake Actuator part #DM72VR should be a direct replacement for the Atwood 61101 Brake Actuator that you have now. This newest updated it rated at 7K instead of 6K. This is a bolt on option that mounts on 3" centers.…

I have a recommendation for you as the unique design and short length of your trailer tongue on your 2011 Stealth Prowler 23 enclosed trailer does not allow for a traditional weight distribution and sway hitch. You may be able to use the B&W…

The best recommendation I can give you since we don't carry the Gabriel actuators would be to check out the link I attached that will take you to a page that has all of the actuator shocks we carry. On the product pages for each there will be…

Using a longer shank like the #EQ90-02-4600 will not reduce the capacity of your hitch. It is typically only when you use an adapter or extender like #C45791. Adding in the extra piece is what causes the reduction because of the way force is applied.…

The SAE number you provided in your question isn't always the most accurate way to determine a correct replacement assembly. This is simply because it does not refer to the actual light part number, but to various safety guidelines that it meets.…

We have a weight distribution shank with quite a bit of drop that will work your Fastway e2 weight distribution hitch, but the part number you mentioned will not because it is a standard ball mount and doesn't have the correct hole spacing. But…