Search: receiver parts   >   !Carpod  x   >   !Amigo  x   >   F-250 and F-350 Super Duty  x   >  

The Diversi-Tech Ball Mount, Part # DTALBM6825-3S, is intended for 2-1/2 inch hitch receivers | This unit is for a 2 1/2 inch receiver. Will it also work with a 2inch receiver? Is the sleeve removable such...

-250. There is part # TLF1002-30 which has a 2-1/2" an 2" receiver tube opening and part # TLF1002 | I have a 2008 Ford F250 Super Duty with Factory Bed - Crew Cab - 4X4 - Diesel - 6.75foot...

Trailer Hitch Receiver part # C31071 is only confirmed to fit GM vehicles. For a front mount trailer hitch | Will this hitch fit my truck 2004 F250 | I do have a front mount trailer hitch receiver for your...

Since the B&W Hitch Receiver Reducer Sleeve part # BWRHXA2182 is considered a "sleeve" it fits | Will this reducer fit flush on Curt Hitch #C15810 ? I’m going to be replacing my receiver soon but don’t want...

I have a 2014 F250 Super Duty pickup with a factory installed Class V 2 1/2 receiver. I am looking | I have a 2014 F250 Super Duty pickup with a factory installed Class V 2 1/2 receiver. I am looking to purchase a 2.5x2.5 ball...

Trailer Hitch Receiver Lock part # e98882. Once the lock arrives and you can physically see what the key | Want to purchase a:Trailer Hitch Receiver Lock for 2 Hitches - Flush - 2-3/4 Span - Chrome Item # BX8858 But...

Can you verify that the item I received is the correct part for my 2004 F350? The shock or package | Can you verify that the item I received is the correct part for my 2004 F350? The shock or package does not...

. We do offer a comparable product from Diversi-Tech designed for 2-inch hitch receivers, part | On the DTALBM6625 ball mount can the sleeve be removed so you could use it on a 2 inch receiver? While I would...

I am looking to replace the stock hitch receiver on my Ford F-350 with a CURT 15410 Trailer Hitch | I am looking to replace the stock hitch receiver on my Ford F-350 with a CURT 15410 Trailer Hitch Receiver. My stock receiver...

On your page for the Draw-Tite part #60522, there are photos of that receiver mounted on a 4WD | On your page for the Draw-Tite part #60522, there are photos of that receiver mounted on a 4WD truck, and even...

the Curt Trailer Hitch Receiver part # C15810. This hitch has a Class V rating with the heavy duty 2-1/2 | What hitch would you recommend? I have a 2013 Ford F-350 SRW 4x4. Heartland Fuel 287 Toy Hauler |...

The Draw-Tite Front Mounted Receiver Hitch, part # 65022 can support 500 pounds. If the dirt bike | will this hitch support a light duty motorcycle carrier with the intention of hauling a dirt bike? | The Draw-Tite...

The Diversi-Tech Aluminum Ball Mount, part # DTBM5200, is designed to fit in 2 inch receiver | will it fit the receiver on a 2004 Ford F-250 Super Duty? | The Diversi-Tech Aluminum Ball Mount, part # DTBM5200,...

To install the Curt Trailer Hitch Receiver, part # C15810, on your 2001 Ford F-250, you will need | will this hitch fit around my 2001 F250 spare tire? I ordered it yesterday ...the tire size is what came stock...

The B&W Tow & Stow 3-Ball Mount part # BWTS30048B is designed for a 3" receiver tube opening | Does this hitch work on a 2006 ford super duty? Looking for a 3ball and 5inch .... thanks | The B&W Tow & Stow 3-Ball...

with the receiver cups on each side not the two inch hitch receiver in the middle. | Im looking to put an older winter wolf snow plow on my truck its a 2003 f-250 superduty what bracket kit do i need? i also...

that does not require a certain trailer hitch is the Curt Extender for 2" Receivers part # C45796 which | I have a 2inch receiver on my truck what is the longest extention that it will handle for a camper |...

the brake controller is attached to the wrong side of the brake pedal. There are two wires that receive | brake controllers only works with switch on controller and not pedal | The situation you are describing is a telltale...

My question is about part number 1542. I noticed that there is only a 2in receiver | My question is about part number 1542. I noticed that there is only a 2in receiver for that if thats the case is there a two...

need the base plate to fit my Sebring. The part that bolts to the vehicle and not the part that slides | Do you sell just the base plate? I have the drawbar from another vehicle I used to pull. I just need...

plug. I want to replace this harness including the square plug to the trailer 7 and 4 way receivers | I have factory tow package with 7 and 4 way trailer harnesses, and the square vehicle wiring side plug. I want to replace...

. For this, I recommend the Curt Trailer Hitch Receiver part # C15410 which is an extremely heavy-duty Class | I have a 2005 f250 SD with a 6.0. I have a WD hitch that I pull my 8-9000 lb camper with. I noticed...

HI Im looking for a 2004 f250 front receiver mount that comes out below the bumper like the C31014 | HI Im looking for a 2004 f250 front receiver mount that comes out below the bumper like the C31014. Can you provide any info...

but is not available now. We also offer locks that will work with a 2-1/2 inch receiver like part # TR63252 | I would like to know the size of the 2 pins that hold the balls to the shank. These 2 pins should...