There is not a Cad drawing of the #42 E-Z Lube Spindle w/ Flange for 5.2K to 7K Trailer Axles - 2-1/4" Diameter #TRU37FR available, but I did include a diagram showing all of the dimensions. It is recommended to have a an axle shop weld the…
Based on the dimensions you listed we have the part #010-180-00 which would fit and work well. This has an outer diameter of 2.33 inch and an inner diameter of 1.68 inch like you need so it would work well.
We have a couple of solutions that will work great as a replacement for your Dometic 600312.331 air conditioner. Take a look at the: -Advent Air Replacement RV Air Conditioner for Dometic Setup w/ Start Capacitor #ACDOM135 for white, and the, -Advent…
The Powertek PDC3009 is a very old and outdated unit so for replacement you'd be wiring up a completely new panel for which I recommend the Progressive Dynamics RV Power Control Center part #PD4135K. This panel has 5 AC branches and 7 DC fuse…
The problem is your Atwood Thermostat 15034 is obsolete. So you would have to try and find one used. You may be able to replace it with a standard Thermostat #CAM09231 as it typically only requires a common and signal wire. I do see the Atwood has a…
The TremPro 645 Silicone All Purpose Sealant for RVs and Trailers #FAS59FR would work great for you as it is a multi-purpose sealant that would work great with plastic.
The seals that you would need to replace your AL-KO 1536852 seals are the TruRyde Grease / Oil Seals 10-10 (Pair) - Double Lip Seals #RG06-090. They have an inner diameter of 2.125", an outer diameter of 3.376", and are used for 5,200 lb -…
It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…
Filters
