Search: a16   >  

Yes, you absolutely can use a B&W fifth wheel hitch in your short bed 2022 Chevy Silverado 2500. We do recommend using a slider hitch since you have the short bed. If your truck already has the OEM puck system in the bed, you can use the…

The difference between the Q20 #C16130 and the A20 #C16140 is the design of the head. The A20 is the newer design that has the more standard dual pivoting head allowing front to back and side to side movement. The Q20 has a spherical axial bearing…

In regards to the Curt A16 Slider 5th Wheel Trailer Hitch part #C16521 with Adapter Rails for Curt 5th Wheel Hitch part #C88KR, the weight capacity is 16,000 lbs. Therefore, so long as the trailer does not exceed this you'll be fine. If you…

I would be happy to help you. There are two big differences in options for towing a 5th wheel trailer with your 2022 Chevy Silverado 2500. The first and easiest would be if you have the prep package. What that is is a from the factory option that…

If you are going to install two of the MORryde X-Factor Crossmembers #MR33WR on your tandem axle trailer Alan you would want to install them on the front and rear hangers. You can install a third one if you want on the middle hanger as well for…

Based on our experiences here I would recommend the Reese 16k hitch part #RP30047 over the Curt hitch part #C16120 that you referenced. The Reese hitch seems to be a bit more reliable and the Curt Q series comes back more often with damage around…

The number ( 411 D) you provided doesn't correspond with a Fan-Tastic Vent roof vent model number, but if yours uses the remote control #FV9068-09 that you referenced, that tells us it's a 7350 Series Fan-Tastic Vent Roof Vent, like…

I reached out to my contact at Fan-Tastic Vent and the 6600R-417 unit no longer has a rectangular remote replacement available. I also confirmed that the Replacement Digital Remote Control for Fan-Tastic Vent Roof Vent with 12V Fan #FV9068-09 is not…

Yes, the Lippert Slide-Out Switch Assembly #LC117460 would work as a replacement for your current switch, but I would definitely check out the wiring running to it to ensure there wasn't additional damage. I've attached a diagram below of…

The head design is slightly different for the A16 hitch #C16120. It's the more recent version of the Q16 that you also mentioned. They made the heads strong enough to be able to be used with a Sidewinder pin box and they upgraded the warranty…

Yes. You can use the Curt #C53CR that you were looking at and it will tee into the existing wiring to give you a 7 way connector in the truck bed of your 2020 GMC Sierra 2500HD Denali. This will keep the 7 way on your rear bumper operational as well…

The MORryde X-Factor Crossmember part #MR33WR attaches to the leaf spring hangers which are located in-between and in the front and rear of each axle. I have attached a photo below to clarify. Therefore, you'll need three for full support on a…