Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
The Traffic Cone Holder, #RA-26, that you mentioned is designed to store cones that are 12" - 36" tall, and the arm of the holder is 22-3/8" long. The arm does not fold down a full 90 degrees, so this would not be the best…
view full answer...The Trailer Hub and Drum Assembly part #AKHD-545-35-EZ-K would be an excellent replacement for a Tru-Ryde Hub/Drum RVD-H-545. Then for new brakes, I recommend the Hydraulic Trailer Brake Kit part #AKFBBRK-35.
view full answer...The Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 5-1/2 #AKHD-555-35-K will fit the spindle on your trailer to replace your AL-KO 8700 hub, but this does have a 5 on 5-1/2" bolt pattern. My information is the AL-KO…
view full answer...The Hooks on The Erickson Ratchet Straps #EM34416 are 2" wide on the outside. The inner diameter of the hook is right about 1-1/4".
view full answer...The CargoBuckle G3 Retractable Ratchet Tie-Down Straps #IMF18800 would have more than enough capacity to secure your 2009 Harley Ultra Classic as they have a break strength of 3,500 lbs and a safe working load limit of 1,167 lbs.
view full answer...Trailers tend not to have a suspension that travels 8 or more inches, which is the amount of lift provided by the Rapid Jack #AM3620. If the axles are far enough apart or the ground is not level it could be an issue though. That's why its tough…
view full answer...I would be happy to help you upgrade your 2022 Highlander's wiring harness so you can control your trailer's brakes. You're going to need the universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge…
view full answer...The Dexter Nev-R-Adjust Electric Trailer Brake Kit #23-468-469 for 3,500 lb axles has 10" diameter x 2-1/4" wide dimensions while the Dexter Electric Trailer Brake Kit #K23-472-473-00 for 3,000 lb axles has 10" diameter x 1-1/2"…
view full answer...The Optronics #BUL602CRB is a 2-function lamp, taillight and back up lamp so it won't function in the fashion you're wanting. The good news is that we have a grommet mount lamp that will provide stop/turn, taillight and back up lamp…
view full answer...The Adco SFS AquaShed Cover for Bumper Pull Trailer part #290-46004 would be an excellent option for a 7 x 14 V-Nose Enclosed Trailer. The Adco SFS AquaShed Cover for Bumper Pull Trailers is actually designed for horse trailers but it will work well…
view full answer...In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
view full answer...Yes, the BoatBuckle G2 Retractable, Ratcheting Transom Tie-Downs #IMF08893 are designed to work on boat trailer that get submerged under water so they would do just fine being repeatedly submerged. For a stainless steel version of the part #IMF08893…
view full answer...Related Searches
Filter Your Search