Result: Goosebox

Hey David, thanks for reaching out! You're going to need the Replacement Oven Door #FR79ZR and the Replacement Grate #FR44GD for your Furrion Range - I confirmed this with my contact at Lippert. It doesn't sound like the oven door is an exact…

Hey Matt, thanks for reaching out! I spoke with my contact at Lippert and that particular piece of the arm isn't available as a replacement part, so we'll need to get you setup with a whole new arm assembly. The correct replacement for your…

Hey Kevin, you can definitely use the Reese fifth wheel hitch part #RP30047 in the bed of your 2024 Ram 2500 that does not have the OEM pucks. All you need is a set of above bed rails that are confirmed to fit your truck like the Curt #C16427-104 and…

Hey Joe. I replied to your other commend but I'll go ahead and reply here just to make sure you see it. We do indeed have the MORryde GooseTech replacement for your MORryde rpb72-1621hd. For that you will need the following: - MORryde GooseTech…

Currently the Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter #RP85FR is the only adapter Lippert approves for use which will not void the Lippert Limited Frame Warranty. This information can be found in the Lippert document…

Mike, as long as your tonneau cover rails don't sit super high above the bed rails the Reese Goosebox #RP94716-61301 will work fine. We also have the 1" High Rise Ball #BWGNXA2050 which can get you a bit more clearance should you need it.

Thanks for your patience! I just heard back from Lippert and their recommendation was to go through the steps to pair the remote with the control board again. I have attached a screenshot below from the instructions they sent me of the Lippert RV…

We do not carry the Reese Revolution (OEM product) but do carry the aftermarket version that is similar which is the Reese Sidewinder, Item #RP34FR. I contacted the manufacturer and the horizontal distance from hole center to hole center for your…

Well I'm certainly sorry to hear about the troubles you are having with your Airxcel unit, but you made a really nice choice to replace it with the Furrion Chill. I appreciate all the specific info you provided, so I double-checked with the…

We recommend having at least 6 inches of clearance between the overhang of a 5th Wheel trailer and the top of the truck's bed rails. Maintaining this space can be a bit harder with a lifted truck but there are certainly ways to try and adjust for…

Hey Bill, the closest RV fridge we have to replace the DOMETIC RM2193 that you have is the Everchill part #324-000110 which is 17-1/2W x 17-3/4D x 19-1/2T Inch. This is just a couple inches smaller than the Dometic.

Sorry John I just heard back from Lippert and I do not have a gearbox motor that will replace your K01265B600.