Result: Capture plate

Hey Rod, thanks for reaching out. Yes, it will! The Curt Helux Shock-Absorbing 5th Wheel Pin Box #C83RJ will indeed work with the Demco Autoslide 5th Wheel Hitch #DM8550038. Just make sure you also use the Demco Autoslide Locking Plate for Lippert…

Louie, Yes, that is a great question. You do not have to worry about the air bags interfering with your B&W Turnoverball hitch setup. The Firestone Ride-Rite Air Bags with Easy Mount Compressor and In-Cab Control #F84XV are compatible with in-bed…

I can see the tag in your picture and can tell that what you have is the Buyers Products King Pin part #337BKPT809B. This is designed to be bolted to a recessed bolt plate on a trailer and once installed the nuts would be lower than the cut out area…

In 2017 Nissan added a single-cab body style to the Titan XD line up. This new body style includes an 8' bed which is compatible with standard fifth wheel hitches. The 2017 extended cab and crew cab models still have a 6 1/2' bed. There are a…

Hey Joseph, yes the Buyers Products 2 inch king pin part #337BKPT809B will work with a Superglide fifth wheel hitch.

Hey David, we have a Pullrite Superglide fifth wheel hitch that is designed to fit the OEM pucks of your 2024 Ram 3500 with the part #PUL28RR but we don't have a Ram adapter kit for Pullrite hitches similar to the part number you mentioned.

The Dexter Breakaway and Parking Kit #T2385200 will allow you to activate the brakes on one axle. You can mount 2 of these to your tandem axle trailer to active both the front and rear axle brakes on your trailer.

I checked with Lippert Components and the Lippert Electric Landing Gear Set #LC333964 and the bolt that comes with the bracket needs to be torqued to 10-18 ft-lbs. You do need to be careful not to get it too tight because you could actually bend the…

Hey Randy, we have what you need but you will need to measure the width of your pin box to determine which capture plate you need. If it's 13-3/8 inches wide you'd want the part #PUL26RR or if it's 13-5/8 inches you'd need the part…

To remove the threaded collar on the Ranch Hitch Universal 5th-Wheel-to-Gooseneck Coupler Adapter #AM3100 or #AM3139 the manufacturer recommends the use of the Slide Hammer for Ranch Hitch #AM3103 as you can see by the cut out of the instructions.…

The Andersen Ultimate Fifth Wheel Connection Adapter part #AM3200 that you referenced has 9 inches of offset built into it. What that means is that ball that connects to the trailer's pin box is moved back 9 inches from the center line between…

Hello Jeremy, You are correct, the Curt Q-Series like #C85NV is not compatible with rotating pin boxes like the Rota-flex. You can most definitely use the Curt Helux Shock-Absorbing 5th Wheel Pin Box - Lippert Rhino - 18K GTW - 3,500 lbs TW #C75MJ…