Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hey Jeff, thanks for your patience as I worked on this for you! I was able to get the Replacement Bed Lift Electric Switch Assembly #LC86FC added to our site, which is exactly what you need according to my contact at Lippert. What happened to your…
view full answer...Hey Mike, thanks for the information! The V-Ride rear suspension system wasn't introduced in the Palazzo line until 2020-2021 so your 2018 Thor Palazzo 33.2 built on a Freightliner 2017 XC-S chassis does not have it. I checked with Roadmaster and…
view full answer...Uni servo and duo servo is basically the style of wheel cylinder. It basically puts pressure on either side of the cylinder. The styles are interchangeable so if you have one style over the other you can go with either style. As long as your drum…
view full answer...Hey Bob, You are right in that we do not have a tandem axle kit with the 9/16" studs that you need. We have them in other wheel stud sizes but not the size you need. With that said you could go with the triple axle kit #DE26AR and have a spare…
view full answer...Hey Greg! Where did your Stromberg Carlson Base Pad Extreme #SC53VR crack? The Andersen Trailer Jack Block #AN39VR is a good alternative. It has the same 6,000 lb capacity and the design is a little more basic/straightforward which makes it less…
view full answer...Hi Roger! I contacted Dexter with your axle information and you will need the #25580 inner bearing and #14125A outer bearing. If you want the races as well, you will need the #25520 and #14276 respectively. The seal will be the Double Lip -…
view full answer...Hey Doug, I looked up your axle part number and was able to determine that it is a 5,200 lb axle with brakes and a 6 lug bolt pattern but I was not able to find the overall length of the axle from hub face to hub face as well as the spring seat to…
view full answer...A Dexter 5,200 lb trailer axle would have an inner bearing of #25580 and an outer bearing of #LM67048.
view full answer...You are correct and all of the settings of the MaxxFan Deluxe Roof Vent w/ 12V Fan, Thermostat, and Remote #MA00-07000K that you mentioned are correct. The powered lift can be turned off to allow you to manually lift the lid, this is thermostatically…
view full answer...There is no direct replacement for the Duo Therm model 57915.621. You will need to upgrade your entire system. I recommend the Advent Air RV Air Conditioner w/ Air Distribution Box, Start Capacitor, and Heat Strip - 13,500 Btu item #ACM135CH in white…
view full answer...So both of the part numbers you mentioned are going to be rated too highly for your trailer that has a GVWR (which is the combined dry weight and max cargo capacity) of nearly 6,800 lbs. A trailer of this weight will have a loaded tongue weight of…
view full answer...The best replacement option we offer for an Atwood RV Water Heater (6 or 10 Gallon) is tankless, the Furrion RV Tankless Water Heater part #FR68SR. It won't be a direct replacement but still pretty easy nonetheless as they are very similar. That…
view full answer...