Search: Air Ride Fifth Wheel Hitch   >   RV Slide Out Parts   >  

Most likely the dealer installed the FlexAir in the lower set of bolts on your trailer which is causing the trailer to now sit too high. What you will need to do is unbolt the pin box and then install it in the higher bolt holes on the trailer.…

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from…

For your 2016 Ford F-350 Long Bed and your B&W Companion 5th Wheel Trailer Hitch #BWRVK3500, I recommend an old style of measurement. To find out where the socket post lies in regard to the rear axle, have a helper stand in the truck bed and…

Since the Road Armor shock absorbing pin box can rotate forward and back you would need to lock out the pin box to use it with the Andersen Ultimate part #AM3200 that you just ordered. That kit is not a part number we offer but it is 3294.

The K-Source tow mirrors part #KS58BV that fits your 2019 Ram 1500 Classic come with all hardware needed to install on your truck. You wouldn't need any additional brackets or hardware to install them.

The best option I have for a 2020 Ram 1500 with 5-1/2' bed would be to use the Demco Hijacker Autoslide 5th Wheel Trailer Hitch part #DM8550040 which would require the Demco Hijacker Premier Series Above-Bed Base Rails and Custom Installation Kit…

To replace your Duo-Therm 57915.622 I recommend picking up the 13.5K Btu Advent unit: White - #ACDOM135 Black - #ACDOM135B This AC unit comes with a start capacitor to help minimize the amount of power needed for the initial startup, and it will plug…

There should be a sticker or plate on the pin box itself that lists the manufacturer and model of the pin box. If it is not present then there are some measurements you can take to determine the model of the pin box. I have included a link that…

We do indeed carry the Trailair Flex Air. Our part number for it is #LC328492, and if you click the provided link, you can see current pricing information. I've also linked you to a product demonstration video.

Most trailers either have a Lippert or MORryde pin box but the real question is what bolt pattern your trailer has. On most pin boxes there will be a tag/sticker that either tells you the bolt pattern or will have an RPO or serial number that we can…

Most standard pin boxes will not make a 90 degree turn in anything less than an 8 foot truck bed, but that is due to being too close to the cab - not the rails. You mentioned you wanted to replace the Rota-Flex with the Gen-Y hitch. Your old pin box…

Thank you so much for the photos! They were super helpful, and I can verify for you that the correct touch screen panel for your Lippert 6-point leveling system is the part number you asked about: - Replacement Touch Screen Control Panel #LC83VR This…