1998  x   >   Pop and Lock  x   >   Pollak  x   >  

I have a 98 gmc suburban and installing a brake controller. vehical came with wiring harness for the plug installed from factory. The blue line for the controller is there but cant find it in the cab. any ideas where it might be? also there...

How do i find the wires? The video provided on YouTube is nothing like my truck. | The wires you need to install the Pop & Lock Custom Tailgate Lock, part # PAL8100 can be found behind the driver side kick panel on yoru 1998 Dakota. They will...

I have a 1998 4runner that will be towing a tear trailer. The trailer has a round 7 pin connector. I have the 7 pin receptacle to match the trailer plug. I wont be needing trailer brakes but the trailer has a battery which will be trickle charged...

Is it possible to order multiple locks that are identical so they may be opened with the same key? | The manual Pop & Lock Custom Tailgate Lock # PAL5100 is only available with unique keys and from what I'm seeing there aren't any options that...

Sent truck in to have frame repaired where i bent it from hauling to much weight. Had shop replace hitch get it back and when i hit brakes and a turn signal is on both side blink? i see the black and white from truck are loose. and the purple...

1998 Ford Ranger XLT side step Will this work with the side step bed tail gate metal handle ? | Yes, we confirmed with Pop and Lock that the part # PAL2300 will fit your 1998 Ford Ranger with a metal handle so this would fit and work well....

Will this work for a 1998 dodge ram 1500 pickup? Thank you | If your 1998 Dodge Ram came with a 7-Way and you need a replacement you can use Pollak 7- and 4-Pole Trailer Connector Socket, # HM40975, and Pigtail Wiring Harness, # PK11998 if needed. The...

98 k1500 ext cab. Power posts on side of fise block facing cab. 40 Amp fuse replaced still no 12v to one oclock pin on 7 way connector | It sounds like you have a fault in the wiring between your fuse box and the 7-pin connector, a bad connection,...

all the lights work except the running lights on a 98 chevy tahoe. it has a factory 7 way with a 4 way adator. | It sounds like the tow package running light fuse is blown. There is a power distribution panel under the hood. When you remove...

1998 Dodge Ram Pickup Laramie V8 Magnum Does this part fit this truck? Pk11893-11933? | I did some checking and the part of # PK11893-11933 with the square connector is not listed as a fit for the 1998 Dodge Ram trucks. The way to add a 7-Way...

I want to install a trailer wiring kit onto my 1998 Suburban. It doesnt have any wires that I can find in place for this. What kit can I use? Id perfer to have it set up like the new trucks round connecter. Any help you could provide would be...

hello I purchased the dodge 5th wheel 7wire extension and i made a bad choice on the plug location in the front side wall,do you offer a 12inch or 18inch extension so my original bumper bracket can be reached with the factory plug. ?any...

Is there any reason why a trailer connector should not be mounted so that it faces downward toward the ground? | If the vehicle side trailer connector is pointed towards the ground then what can happen is the increased likelihood of debris and...

Mid way thorough my 1998 ford e-350 15 passenger install after picking up the parts here https://www.etrailer.com/question-701673.html. I found the OEM connector under the dash to connect my Curt Custom Wiring Adapter # C51322 , but cannot...

When connected to my trailer. My brake lights and turn signals work but when I turn on taillights nothing works | Typically when something like this happens, it will mean you have a bad ground somewhere. This can be on either your truck or your...

will Pollak # pk11893 and pk 11998 bolt into this mount without any modifiication | A Pollack Trailer Connector like # PK11893, should fit in the 6 and 7-Way Trailer Connector Mounting Box, # 18159, without modifying either part. However, there...

I have an 1998 Mazda B2500 which I bought used. My truck does not have the plastic tailgate handle. This one is steel, so I am now starting to think that it was replaced. But, in any case, the Pop and Lock bracket is not sliding onto the...

I need an electrical schematic to install the wiring into my 1998 Winstar | The wiring harness for your 1998 Ford Windstar is a plug and play harness, part # C55346. It plugs into your tail light assemblies. I have also included a link to the...

1998 GMC dually diesel pickup On the lead that charges the battery from the truck to the battery in the trailer. This lead should charge the trailer battery at the same time as the truck battery when the vehicle is running via the alternator. ...

I have a 7 prong plug on my truck. I need to find an adapter to pull a u haul trailer. Can cant seem to find adapter. One prong is bigger and the other 6 are the same size. Might need to send you guys a picture. Thanks | Sounds like you have...

does any of your tonneau covers lockable? | Check out the Access Tonneau Cover # 834532000432. This cover uses a single latch with a slide lock that will prevent the cover from being opened without the tailgate first being opened. So if you...

I have a 7-way RV plug installed on a 1998 Ford Explorer. While rewiring the plug and testing it, I discovered that I have 12 volts of power on both the black wire, which I expected, but also on the Blue trailer brake wire. This was the case...

was wondering if you had any videos of brake controller being installed on 1998 chevy blazer. And if you can tell me what color wire is the brake wire to tie into under the dash. I think I found it with test light, it comes on only when brake...

I have a 1998 Dodge Ram 2500 4x4 diesel with quad cab and long bed, to which I am mounting a slide in camper with its own wiring connector to plug into my factory trailer connector Chrysler 56038366. I want to increase the wire gauge going thru...