Where Does Draw-Tite Max-Frame Trailer Hitch Mount on 1966 Ford F-100 Frame
I have a 66 F100 short bed fleetside with a Mustang gas tank where the spare tire was, does this hitch fit inside or outside of the frame? | The Draw-Tite Max-Frame Trailer Hitch # 75034 actually mounts to the underside of the 1966 Ford F-100...
Fifth Wheel Installation Kit Under Bed Brackets and Hardware for a 1979 Ford F-150 and Trail Boss
I have an older Trail Boss hitch and rails. What I need to know is this the kit I would need to mount it into my Ford F150 Custom. And also if this is all I would need. Thank you for any help info. | For your 1979 Ford F-150 and Trail Boss 5th...
Will Advent AC Unit # ACDOM150 Replace Dometic Duo Therm Unit Easily
Is this a replacement for the Duo Therm? | Yes, the Advent AC unit part # ACDOM150 that you referenced will work great as a replacement for a Dometic Duo Therm unit like you have. We had a customer come back and tell us how well this worked...
Hitch Option for a 1960 Ford F100
Will this hitch fit a 1960 Ford F100? | We don't have any custom fit hitches confirmed to fit your 1960 Ford F-100, but a multi-fit hitch like the # 41990-07 could possibly work. I'd recommend using a hitch like this or having one professionally...
Diameter and Thread Pitch of Wheel Stud on AxleTek AKIHUB-545-35-G-EZ-K Trailer Idler Hub
for TDE Trailer Hub Part 46210 | The AxleTek # AKIHUB-545-35-G-EZ-K hub you'd looked at uses 1/2 inch-20 wheel studs. 1/2 inch diameter, 20 threads per inch. The lug nuts are included with the hub, as are the bearings, races, grease seal and...
Replacement Roof Vent Lid Recommendation for 1993 Lance Squire 4000
Trying to get a vent lid for our 1993 Lance Squire 4000 9foot 4. Its looks to be the 14x14 but the hinge pins everyone sells opposite of what I have. The hinges on mine are small, large, large center small, large. Most I see are for four...
Reciever Tube Depth from Frame on the Curt Class IV Trailer Hitch for a 1985 Ford F-150
Hi, What is the distance in inches from the bottom of the frame to the top of the hitch? If an additional spacer kit is needed to install this hitch on my truck, would you please tell me the item number of the kit and the additional cost? My...
Rail Kit to Allow Use of Gooseneck Hitch Adapter in 1975 Ford F-250 Long Bed Pickup
Can I install a goose neck hitch below bed? 1975 Ford F250 8 foot bed | We do not have any under-bed gooseneck hitches for your 1975 Ford F-250 long bed but we do have a way for you to tow a gooseneck trailer. You can start with an above-bed...
Trailer Hitch for 1971 Ford F-250 with Sportsliner Bumper
Which hitch do you recommend to clear this sportsliner bumper? Draw-Tite Max-E-Loader Trailer Hitch Receiver - Custom Fit - Class III - 2 Item # 41504? or Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2 Item # 75034 or...
Will Dexstar Conventional Steel Wheel With Offset Item # AM20504 Work With 1979 Ford F-150
I know that you cannot recommend this wheel for a vehicle but will this wheel Item # AM20504 fit on a 1979 Ford F-150, custom super cab pickup? Its a 2 wheel drive truck with a stock 5 bolt pattern wheel. I like these wheels and would like...
Hitch, Brake Controller and 7-Way Trailer Connector for 1966 Ford F-250
Hello, Im needing recommendations for adding brake controller and hitch to 1966 Ford F250, Im going to be towing a 2-horse trailer that weighs 3200 lbs and tongue weight 200. It currently has 7 pin on it that is frayed and I need to replace...
What is Bracket Length on Lippert Components Spare Tire Winch LC159056 that Holds Wheel
I would like to use this on a old Ford F100. The spare tire has a 3 1/2inch center hole. Is the length of the holder bracket long enough? | Yes, the holder bracket of the Lippert Components Spare Tire Winch with Offset Cable # LC159056 is...
Receiver and Weight Distribution Hitch Recommendation for 1968 Ford F-250
I have a 1968 Ford F250. With a Heavy duty bumper that attaches to the Frame in multiple spots.I have a ball hitch on the bumper. I have a 20 foot 1950 Airstream trailer that is 3500 lbs. I would like to use a weight distribution bar but I cannot...
Does the Westin Fey Bumper # 21000-92230 Come with Brackets/Hardware for a 1975 Ford F250?
Does this bumper come with brackets to fit the narrow highboyinch frame of the 75 F250 4x4? I have zero brackets on hand already. | Yes, the Westin Fey Diamondstep Rear Bumper with Custom Installation Kit - Chrome Plated Steel # 21000-92230...
Trailer Hitch and Wiring for 1970 Ford F-250
Id like to use this hitch and want to make sure i order everything ill need to install, as well as wiring. Can you recommend which wiring system and if any mounts are needed? | The B and W Trailer hitch part # BWHDRH25122 that you referenced...
Troubleshooting Trailer Lights Not Working and Brake Controller Not Recognizing Connection
I have a 71 nomad that when I plug into my truck none of the lights work. I dont have the camper battery hooked up to since I need a new one, could that be part of problem of why they dont turn on? Also brake control doesn't have connection...
Firestone Air Bag Kit that Fits 1972 Ford F-350 2WD
which airbags fit this truck? | For your 1972 Ford F-350 2WD dually we have the Firestone kit part # F2071 as a confirmed fit that would work well. We confirmed this with Firestone. |
Compatability of Receiver Hitch with Eagle Lift Gate on 1989 Ford F-250 4 x 4
I have an eagle lift-gate on my 1989 F-250 4x4. What is the measurement from the bottom of the frame to the top of the receiving tube for this model 41004? | I contacted Draw-Tite about the Class III Max-E-Loader Trailer Hitch, item # 41004....
Bolt Hole Spacing Drivers Side Frame Rail to Passenger Side Frame Rail B&W Heavy Duty Receiver
left to right hole spacing with hitch configured for 34inch frame | The Hole spacing for the B&W Heavy-Duty Trailer Hitch Receiver # BWHDRH25198 are as follows(all measurements are for center of hole to center of hole). 34" Width Frame -Front...
Hitch Recommendation for a 1976 Ford F150 with a Deep Drop Bumper
what is a roll pan bumper? I have sent a photo of mine. is this a bumper. it doesnt measure 10 inches. | A roll pan bumper is a bumper that basically makes the rear bumper look as if it does not stick out further than the rest of the truck...
What do Trailer Acronyms GTW and TW Mean
what is the difference between GTW and TW | In the trailer world GTW stands for Gross Trailer Weight, and TW means tongue weight. Gross trailer weight is the entire weight of the trailer and tongue weight is the amount of vertical load that...
Installation Instructions for Prodigy P3 Brake Controller in 1973 Ford F-250
Just bought a p3 brake controller from you guys and am installing on a 73 f250. I wont have a lot of time to install so was hoping I could get a little advice and direction so when I get it I can hit the ground running...any help, even some...
Why is There Only One Ground Wire on the Adapter 4-Pole to 7-Pole and 4-Pole Part # 37185
On part #37185 why is there no ground wire coming off of the Four flat connector that plugs into the existing 4 way? Is the single white wire the ground for both the 4 flat and 7 round? If so can i use the part #40105 T connector in my wiring...
Will B and W Hitch BWHDRH25122 Fit 1977 Ford F-150 with 37 inch Frame Width
My 1977 ford f150 has a frame width of 37 inch out to out what hitch do I need | A 37 inch wide truck frame like what you have on your 1977 Ford F-150 a very common width so for a hitch the B and W # BWHDRH25122 would work really well. The other...
Filter Your Search
Contact and Help