!Outback Wagon  x   >   Custom Install Kit  x   >   Diamond  x   >  

What bulb fits this fixture and do you carry it? | The Gustafson RV Pendant Light # 277-000415 that you referenced needs a 1076 style bulb which we offer as a LED with # DI47ZR. This puts out a warm white which looks good for interior fixtures...

I purchased 10 of your Euro Style Double ceiling lights #RViL22 and need some replacement bulbs. Are they available? | Yes, the replacement bulbs for the RV Euro Style Interior Double Ceiling Light with Built-In Switch part # RVIL22 are the...

My 2014 Smart is wired as a tow vehicle and has 2 diodes for the rear stop/turn signals. I want to convert the rear stop/turn signal lights to LEDs and I have purchased load resistors for this in addition to the LED bulbs. Do I splice the load...

Any ideas to make this light work without issues with computer who thinks a trailer is hooked up? | On vehicles that have a hard time working properly with LED trailer taillights or hitch covers the solution is to install load resistors on the...

Found the Optronics LED trailer lights on your site. Am interested in their model # STL178RCCFPB. Any chance you can source this light? Thanks much. | The Optronics GloLight LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 22 Diodes...

Have you heard of this lighted hitch cover not working in the new trucks because power is only supplied to the outlet when it senses a load? Is there a work around. Thanks. | There are always new things added to trucks with sensors and such...

We just bought our rv with this DVD1000 radio system. From watching your video It seems the plug in for the am/FM is on the back. How do I access this if my radio is already installed? | You are correct that the AM/FM signal input is at the...

Hello, I just installed a Curt 56320 custom wiring harness on my 2019 Ford Escape. I have running lights, brake lights, right turn signal however the left blinks quickly and the right blinks at the same time. I have a 2017 Shorelander boat...

I recently asked this question: Converter on my Nissan Xterra. I have all led lights on my Xterra. The converter is wired correctly, but when I hit my brake pedal the turn signal indicators on the dash come on. The turn signals still work but...

Hello. I work for a company that installs chipper bodies on trucks. We have a 2020 freightliner truck that has amber led strobe lights, led back up lights, led running lights and led stop turn signal lights. We use these same lights in all our...

lights stay on when the engine is off however the left side turn signal does not work | It sounds like you have a bad ground on the left stop/turn circuit (probably the trailer light) and you're using LEDs on your trailer when your vehicle is...

Ive installed this controller after replacing a Curt triflex in my 77 gmc c35. The triflex had an overload fault on it so I replaced it with a simpler controller. I checked all of my wiring and even replaced the 7way plug on the truck and also...

The Putco Metal 360 LEDs state that they are CANBUS error free...would I still need a resistor spliced in to prevent hyper flashing? Looking for a simple LED upgrade for my 2016 Colorado. | The Putco part # P347440A-360 does have a built in...

Im getting moisture inside the back up lense. What can I do to clear and stop the moisture. The mount appears to be well caulked. | If your LED Trailer Tail Light w/ Reflector - Weatherproof - 4 Function - 76 Diodes - Clear/Red Lens Item # DG52721PB...

Good afternoon. I am going to replace my lights over the vanity and the bulbs it takes are 9019 bulbs. Will the led 2099/ 1141/ 1156 bulb work? I can not find a cross reference. | That's not a super popular bulb style but I was able to find...

How many watts or amps does this rod use? 600-1500? | I checked with Diamond and the part # DGR6P2PB draws 400 watts/4 amps and has resistance of 29-31 ohms. |

what is the difference between the 6 gallon and the 10 gallon element. is the element for the 10 gallon just longer? | The wattage of the anode rod and the length are different between the 10 gallon Hott Rod Conversion kit part # DGR10VP and...

why do newer rvs use a push on/push off button in the control panel for some lighting? can they b converted to rocker switch? Are bad for outside lighting dont know if they are on or off, unless u open door and look | I'm not certain, but If...

I have a 12 v Jensen TV that i have a HDMI cable to connect to a sound bar. How do I connect the 60A to the sound bar. What type of cable do run from the 60A to the sound bar? | There is not an HDMI input/output on the Jensen Stereo -AM/FM...

Does the tail light assembly need a new grommet to install and if so do you have the piece ? Thank You. | Nope, a grommet is not required in order for you to install LED Trailer Tail Light w/ Reflector - Weatherproof - 4 Function - 76 Diodes...

I have 12 vdc on the brown line without the lights connected. as soon as i connect the wires, it s to 7 vdc and its not enough to light the LED. Why is it dropping voltage? | It sounds like the ground connection often in the mounting hardware...

Hello. I am wondering what the width of these strip lights is. I would like to replace some existing lights but they must be no more than 3/8 inch wide. Thanks. | You're in luck because the width is exactly 3/8" of the Diamond light strip, which...

What replacement bulb# does this take? | The Roadmaster Bulb and Socket Taillight Wiring Kit, part # RM-155 would take a standard 1157 replacement bulb. We offer them as part # DI79VR. |

2020 Ford Explorer ST I bought a Reese Ford lighted hitch cover, plugged it in and all sensors for the trailer went haywire. Will this lighted hitch cover do the same thing? | In order to use the Ford LED Lighted Trailer Hitch Cover part # RP86532...