Why Does Anti-Rattle Fasteners for License Plate Frames # CR81400 Only Come with Two Bolts
Hello, I just open my package.. I found 4 washers, 2 screws, and 2 screwable washers. How do I install my license plate since I only have 2 screws. Please Advise. | The Anti-Rattle Fasteners for License Plate Frames # CR81400 that you referenced...
Are Tinted License Plate Covers Legal
i live in missouri and wondering if this is legal in my state? tuf flat shield for license plate- smoke | At this time the Missouri Department of Revenue website states that all parts of the license plate must be visible and clear for inspection....
Can Cargo Carrier Legally Obstruct View of License Plate?
can the carrier be legally used when it covers the rear license plate as shown in several of the in use pictures? especially apparent when the license plate is located in the rear bumper. | A cargo carrier like the Viking Solutions Tilt-N-Go...
Mounting Hole Spacing of Ultimate Tuf Combo License Plate Frame CR62510
What is the distance in inches between the mounting holes on this product? I have a 2018 Ram 1500 Crew Cab. | Mounting hole spacing for the Ultimate Tuf Combo License Plate Frame # CR62510 is 7 x 4-5/8-inches on hole centers as shown in the...
License Plate Frame and Hitch Cover for Golf Enthusiast
Need chrome holder. Green background, white lettering. Top of plate= I PUTT BOTTOM = BETTER THAN I DRIVE is that possible? Thanks | We don't have custom license plate frames, but we do have golf frames available like # CR19509. I've attached...
Does Diamondesque License Plate Frame CR18130 Come With One Or Two Frames?
On the frame, does this come front and back or do I need to order 2 singles plates fames | I believe you are referring to the Diamondesque License Plate Frame - Chrome and Clear # CR18130 that you were looking at. This is sold as a single frame...
Will the Cruiser Accessories Bubble Shield # CR72200 fit a Standard Size License Plate
Does the tinted shield fit inside a standard frame? Thanks! | The Cruiser Accessories Bubble Shield # CR72200 that you referenced is designed to fit over a standard sized license plate without a frame around it. If the frame was pretty flat...
Rear License Plate Bracket Recommendation for a 2007 BMW 328xi
Will this part fit a 2007 BMW 328xi rear? | Yes, the Cruiser Accessories License Plate Mounting Plate # CR79150 can be made to fit nearly every vehicle so it would work well on your 2007 BMW 328xi. |
Is Cruiser Accessories CR76200 Tuf Flat License Plate Shield Compatible with License Plate Frames
am i able to use my license plate frame over this cover? or will it be too thick for the screws | According to Cruiser Accessories, their # CR76200 Tuf Flat license plate shield is designed to work with a license plate frame, so it'll work just...
Availability of Christian License Plate Frame
Quote for license plate frames. 100 pieces. Written or with an inscription JESUS top and CHRIST on the bottom. Thanks | I have some license plate frames that you may be interested in, but we do not have anything like what you described. I...
Locking License Plate Screw Kit for a Honda Accord
Honda says their license plate screws are M6 1-20. 1inch long metric. It doesnt appear that this part will fit. Does the manufacturer make one that would? | Since the Star Pin Locking Fasteners # CR81200 comes with new nuts for the screws...
Inside Dimensions of the Stainless Steel License plate frame part # CR21010
Would like to know the measurements of inside the polished stainless steel car tag frame...I need at least 5.25 inches ...thanks.. Need info asap... | The Stainless Steel License plate frame part # CR21010 that you referenced is 5-3/8 inches...
Will the Elite Stainless License Plate Frame Part # CR21010 Fit a 2018 Acura ILX
Hello, I am interested in the Stainless Steel License plate frame part # CR21010. It is stated that it is 5-3/8 inches tall internally and 11-13/32 inches wide internally. I will measure my current frame tomorrow. I was wondering if you...
What Size Screws Come With the Star Pin Locking Fasteners for License Plates and Frames
What are the screw dimensions of the CR81200, are they #14x3/4"? | Correct, the Star Pin Locking Fasteners for License Plates and Frames part # CR81200 comes with four #14 x 3/4" screws. |
Do License Plate Brackets CR20643 and CR15350 Fit Standard License Plates
do these fit all plates? do they come in black? The chrome are black the same | The part # CR20643 does fit all standard US license plates. We have the black frame part # CR15350 as well. |
What Type of Hole Does Anti-Rattle Star Pin Locking Fasteners for License Plates # CR81420 Fit
What size holes do I need to drill for the nylon fasteners? Thx | The Anti-Rattle Star Pin Locking Fasteners for License Plates and Frames # CR81420 is designed to fit the standard square hole size found on license plate brackets. You wouldn't...
Where Was USA Flag License Plate Frame Made
Was this made in the usa | According to the manufacturer, Cruiser, they design and engineer their products in the USA, but they manufacture parts in China, so that is where the USA Flag License Plate Frame - Red, White, Blue and Chrome # CR23003...
How Does License Plate Install Hardware part # CR80230 Install on Bracket
How do I fasten these to my vehicle? Does the flat part of the plastic nut go behind the holder that the plate will be fastened to? Flat part against vehicle or the fluted part against vehicle. Thanks for the help. | On the license plate...
Is the Ultimate Tuf Combo License Plate Frame and Clear Shield CR62510 Tinted
Is the clear shield crystal clear or does it have a very light tint? I’m looking to soften the light color of my license plate on my deep blue car but do not want to make my license plate difficult to read or draw the attention of law enforcement...
License Plate Mounting Anchors for BigTex 70TV Trailer
Im new at this. My BigTex 70TV trailer has two 3/8inch square holes in only the outer surface of the square tube frame. What fasteners/fastening system should I use? If its CR81200, can I be sure the plastic plugs never pop out? | The 3/8...
Recommended Bolts for Cruiser Bowtie License Plate Frame
looking for bowtie license plate bolts or screws 8 in a pack | It sounds like you are looking for bolts for your Bowtie license plate, like the Bowtie Cruiser Frame # CR10437. The bolts # CR81200 are the correct standard bolts and nuts for...
How to Remove License Plate Fastener Caps Like # CR82650
My husband has license caps on his plates. They look like your product CR82650. How do you remove them? I have to turn in his disabled vet plate to the state because he has died and nobody can figure out how to get them off the vehicle. Thanks....
Adding a License Plate Bracket to Carpod Hitch Mount Cargo Carrier
Im interested in: 24x48-3/4 Carpod Walled, Folding Cargo Carrier - 2inch Hitches - w/ Lid, Bag, Rise Shank - 450 lbs Item # M2205-01-02 I drive a 2010 Ford Expedition and am concerned about the carrier blocking the license plate. In NYS, license...
License Plate Holder and Light for Use on Ramped Utility Trailer
Hi, I just purchased a new utility trailer and it did not come with license plate bracket. My question is how do I incorporate a new license plate bracket with light into existing hardware? | You can add a license plate holder and light to your...
Filter Your Search
Contact and Help