!Liberty Travel Trailer  x   >   !HWT  x   >   TorkLift  x   >  

Will these work in addition with SuperSprings Custom Suspension Stabilizer and Sway Control Kit? Or are they not needed because the SuperSprings are enough? | Yes, the TorkLift StableLoad Rear Suspension Upgrade can be used along with the SuperSprings...

Will Torklift rear tie down TLC3209 fit my 2008 Chevy 2500HD with a Super Hitch TLC1206 installed? | I have another option for you, but the TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLC3209 you were looking at are only confirmed...

I have an automatic step which does not extend beyond the cab. I have a factory hitch and a factory kick down step to assist entering the back of the bed. What tie downs do I need? | I would be happy to help! For your 2019 Ram 3500 with the...

I have a Rockwood 1905 it’s a 2018. I am wanting to put a 100lb generator on my back bumper. I was thinking that the 400lb geny-go with the standard mount-n- lock would work? Any help from you would be wonderful. | The Mount-n-Lock SafetyStruts...

TCL 2204 & TCL 3206 Good day, what will I have to do to make these fit a 2003 chev 2500 crew cab with a 6.5foot bed? | The TorkLift Custom Frame-Mounted Camper Tie Downs # TLC2204 and # TLC3206 that you referenced are designed to fit the 2003...

My truck is a 2015 Dodge Ram, 2500, crewcab, 6ft 4inch bed. Etrailer has a video of a superhitch mounting on a 2015 Ram 3500. That video showed keeping the factory hitch and adding the lower receiver hitch below it. The factory hitch was...

Hello. Im interested in the SolidStep. RV foldown steps. I have a truck camper that has a 22 inch door and is 39 inches from the bottom of my door to the ground. It seems this may need to be custom made. Do you know if this can be done....

Hello, My truck is 2020 RAM 2500 Mega Cab. Ive installed a runningboard that was bought from you guys. There is no step from manufacturer. Please tell me the exact Torklift tie downs part numbers that I need to buy. Thanks | For your 2020 Ram...

I own a 2020 GMC Sierra HD 3500 single wheel SLE standard 6 8 bed. I have a truck camper 2006 Lance 845 and will get the frame mounted truck attachments for the tie downs. Which Torklift tie downs should I purchase for use between the mounts...

Hello, o reaching out about your Torklift camper tie downs. Are the 2016 ram long bed Dually factory hitch the same part number as the tie downs on a 2018 tradesman long bed with the factory hitch the same part number? From what I am seeing...

Hello, I want to prep my f150 Ford Supercab with with frame mounted tie downs to hold a light slide in camper. My truck has the 6.5 foot bed. I am looking for the brackets on your website. | The correct TorkLift Custom Frame-Mounted Camper...

Hi, I’m looking to purchase this item in 21”. How long is the wiring that goes towards the front of the truck camper vs the length that goes out to a trailer? | The length of the TorkLift Wiring Extension # TLW6524 is 8' 10 1/2" from the base...

My Roadtrek camper vans 7-way connector is facing the hitch receiver and I have about 8” clearance. With this controller at 6 5/8” and then when plugging in the trailer connection, I think it soil bump into the receiver. | To install the Curt...

I have a 2007 Ford E350 6.0 diesel and both starting batteries are on the passenger side frame. There is no room left on that side and on the drivers side I need to clear the parking brake cables. Thanks, | The TorkLift HiddenPower Under-Vehicle...

I was looking for the load rating information | The TorkLift Custom Frame-Mounted Camper Tie-Downs # TLD2121 do not carry a specific weight rating since they are capable of securing any slide-in truck camper that your Dodge or Ram truck can...

how much weight can it carry? | I spoke with my contact at Tork Lift and he informed me that the TorkLift Lock and Load # TLA7752 that you referenced has a 500 lb capacity. I attached a review video for you to check out as well. |

Does the 48inch length include the plug and trailer connector or is this the length of wires running between them? | The 48 inches of length that the TorkLift Wiring Harness Extension # TLW6042 has is the distance from end to end including the...

Hello, I saw this kit and I noticed it only states for storage. I wanted to know could it be used for sleeping in as well. When i pull my truck camper off I do like to not have to it all the way to the ground to sleep in it or stay a week...

What is the best fit for a 2021 Ford F350 short bed four-wheel-drive truck? | I'm going to assume that you have the factory trailer hitch receiver on your 2021 Ford F-350 as most have this hitch (if not, please let me know), and in regards to...

Hi, I have a mounting bracket width of 25.5 on my current camper. On the specs page of the Lippert triple step page see attachment, it appears that the LC432690 has a bracket width of 25.5 and the LC432696 has a bracket width of 27.5. However,...

Hello, the specs state to use weight distribution to utilize the upper capacities, but no recommendation is given for a torklift WD. I will be using this under a truck camper to get the hitch out, and connect to a 20 foot cargo trailer. This...

I tow a 33 ft TT that is about 7800 lbs with a 2009 Suburban 2500 4x4.. I currently have Torklift with Sumo Springs on the suspension.. Would the RoadMaster Active Suspension be better or worse for my set up? No issues with current set up just...

The Moryde step has a quick hinge release to be used when there is insufficient lateral space to deploy the steps... like when in tightly spaced storage. Does the Lippert step unit have a similar quick release capability? | I spoke with Lippert...

My truck has a large cone at the aft end of the exhaust pipe. There is not much clearance between the cone and the bumper. The Torklift R3502 tiedowns are specified for this hitch. Will these tiedowns clear the available gap? | If you have...