Recommended Carrying Tool For A Weigh Safe Clam Shell
Would this 2” to 2 5/16” clam-shell adapter from Weigh Safe work with the 303-HG-712 carry tool to convert it to carry a 2” ball hitch assembly? | When it comes to lifting, carrying, installing, and removing your heavy weight distribution head...
How Much Do the Fastway e2 Weight Distribution Systems Weigh
How much does it weigh? | The Fastway e2 Weight Distribution Systems like part # FA94-00-1061 weigh around 85 lbs. That said, the weight of a weight distribution system does not get added to the total as it becomes part of the frame. In regards...
Can HitchGrip Carrying Tool for Weight Distribution Head Assemblies Help with Rock Tamers
I have a weight distribution head with rock tamer mudflaps installed. Would I be able to carry it using this on the 2 5/16th ball and holding the bar of the rock tamers in the other hand and will the hitchgrip handle the additional weight?...
Can HitchGrip Carrying Tool be Used for Blue Ox Weight Distribution System
I have a Blue_Ox Weight distribution hitch for my Grand Design Imagine XLS 22RBE Travel Trailer. The ball height top of the ball to the top of the hitch is about 2.75 inches. Will the Hitch Grip 303-HG-712 work with the Blue-Ox Wt Distribution...
Recommended Weight Distribution System Carrier
will your hitch grip fit a 2 inch ball? | The HitchGrip Carrying Tool for Weight Distribution Head Assembly with 2-5/16" Ball # 303-HG-712 will not work with a 2 inch ball. You may be interested in the Classic Accessories Tow Bar and Weight...
What Does Hitch Grip part # 303-HG-712 Weigh
How much does it weigh? | The Hitch Grip part # 303-HG-712 that you referenced weighs 2 lbs. |
Do People Normally Remove Spring Bars of Weight Distribution System before Removing Head
Im surprised nobody mentions anything about the torsion bars that connect to the head. Do people really ever remove those? Does this tool work with them attached to the head? | Typically when people uninstall a weight distribution system the...
2-1/2 Drop Shank Compatible With Reese Weight Distribution # RP66131
I bought this dist hitch RP66131 I need a 2.5 shank... will this work w/ the dist hitch above? EQ90-02-4900 | Yes, the Equal-i-zer Weight Dist Shank # EQ90-02-4900 will work with the Reese Weight Distribution w/out Shank # RP66131. You will...
Weight of Reese RE34FR 6000 lb Weight Distribution System
How much does the sway bar itself weigh? | Minus packaging, the Reese # RE34FR 6000 lb weight distribution system weighs about 90 lbs. If you're concerned about lugging the weight distribution head and shank around when installing it on the...
Weight of Weight Distribution Head, Shank and Trailer Ball on EQ37100ET Equal-izer 1000 lb System
How heavy is the fully assembled unit both with and without the sway bars attached? I would be removing the Whole from the tow vehicle multiple times a year when not in use EQ37120ET. Including with ball, i will be taking the bars off to take...
How Well Does The HitchGrip Carrying Tool Secure To The Hitch Ball?
Does this actually work well? Been thinking of a way to handle hitch easier. I typically leave it attached to truck when traveling and place bars in front storage compartment. My hitch shank has 3" of rise so tailgate stays up when hitch is...
Carrier Tool that Grabs the Hitch Ball
Saw your ad for a handheld hitch carrier that grabs the ball on the receiver hitch. Can you tell me what the part number is ! Thanks | It sounds like you're referring to the HitchGrip Carrying Tool which is part # 303-HG-712. It's techincally...
Timbren Rear Suspension Enhancement System Instructions for 1997 Ford F-250- F-350 Heavy Duty
Timbren frtt350e bracket doesn’t fit truck bracket. Can send pictures. Thanks | I am sorry to hear you are having trouble installing the Timbren Rear Suspension Enhancement System item # TFRTT350E on your 1997 F-250 or F-350 Ford Heavy Duty....
Recommended Weight Distribution System for Forest River E-Pro 20BHS
Im looking for a valueinch priced WDH/anti-sway hitch such as Fastway E2 trunnion or Husky Centerline trunnion, but Im wondering about the weights of the WDHs themselves that will add to the total vehicle weight, or the weight of the WDH head...
Are The Spring Bars On Weight Distribution Hitches Removable To Ease In Removal?
I am looking for a Weight Distribution setup w/sway control for my 2020 Chevy Silverado 1500 to pull a travel trailer. My question is... Are the swing bars removeable? When I reach my destination and unload does the set-up break down for...
How Much Does Each Part of the Equal-i-zer 10K System Weigh
Hi, how much does the 1,000/10,000 hitch weigh? How much of that is the brackets that attach to the trailer? Does the entire weight regardless goes onto the tongue weight effectively of the trailer? | The Equal-i-zer Weight Distribution System...
Comparing Reese Strait Line vs Steady Flex Hitch for Ease of Removal for Storage
As my Arctic Fox ordered trailer will be stored in an RV storage lot ease of hitch removal and re-installing is important before and after use. Which hitch is least complex and lighter given performance levels are about even. My tow vehicle...
Trailer Hitch Ball Carrier for Equal-i-zer Weight Distribution System
2-5/8 ball receiver hand carrier Can not find it.would like to buy one | I assume you are referring to a 2-5/16" trailer hitch ball as there is not currently a 2-5/8" hitch ball on the market that I am aware of. If it turns out that you do...
Maximum Drop that Hitch Grip Carrying Tool Can be Used With
What is the drop position. Im thinking about buying this but I want to be sure of this before I do. Thanks | The maximum recommended drop position of the HitchGrip Carrying Tool # 303-HG-712 is 4-1/2 inches. |
Is There a Way to Help Lift Weight Distribution System Head
I purchased this system last year from you. Sadly my husband who was much stronger passed away last year and now I need to manage it on my own. I am not as strong as he was. Blue OX Sway Pro 550 BXW0550 Tow vehicle Toyota Tundra Trailer Casita...
What is Weight of Head and Shank of Fastway E2 Weight Distribution
I am concerned about the head assembly weight and shank on The E2 Fastway Equalizer Problem: I will need to remove the Head frequently when I arrive at the campground to put my bike rack onto my truck. I used to have the Blue OX sway pro...
Options for Carrying a Weight Distribution System Head or Ball Mount
I need this kind of tool but my is 5.5 inches I find this heavy and hard to carry... Is there other alternative... any suggestion? | The HitchGrip Carrying Tool # 303-HG-712 is only available in one size and fits a 2-5/16 inch ball. The size...
Does HitchGrip Carrying Tool for Weight Distribution Head Allow Carrying of Spring Bars Too
Am I able to use this tool to pull and carry the receiver/ball with my sway bars ? | The HitchGrip Carrying Tool for Weight Distribution Head Assembly # 303-HG-712 that you referenced is balanced for carrying just the head and shank of a weight...
HitchGrip Compatibility With Adjustable Ball Mount With 2-5/8 Inches Between Ball And Drop Shank
RE: the hitch grip My adjustable draw bar is set up with the long part going up. There is 2 5/8inch clearance between the ball and the draw bar. Is this enough for the HitchGrip. | I have some photos attached to help you with the dimensions...
Filter Your Search
Contact and Help