Parts Needed to Install Electric Brakes On 1995 Coleman Destiny Royale Trailer
I have a 1995 Coleman Destiny Royale pop up camper. It has brake flanges on the axle 4 hole and the electric brake wiring in place. Im thinking about installing electric brakes on this unit. The current hub is a 5 bolt with 5.30x12 wheels. Im...
Replacement Equalizers Measuring Approximately 6 Inches Long x 4 Inches Tall
Looking for suspension rebuild package with shackles that have 2 3/4inch center to center spacing and equalixer that is 4inch top hole to center of bottom holes and 6 1/4inch center to center bottom hole spacing along with all bolts and nuts...
Replacement 2K 26 Leaf Springs for Boat Trailer
I took one leaf spring out and I'm pretty sure you're right. They need replacing. I will also need the U clamps that hold it on the axel and the bolts that fasten the leaf spring to the frame and the shackle. They leaf springs are about 26 1/4"...
Hanger Bolt Recommendation for a 3-Leaf Slipper Spring # WIE3
Hi etrailer, I ordered replaced leaf springs, and saw the video warning that the bolts were 9/16 instead of 1/2. One question, one suggestion: Does both the front and the rear slipper end need to be 9/16? I understand this is a change from...
Washer Recommendation to Prevent Play of Hub on Spindle
I just replaced the hubs on my jon boat trailer using CE Smith 4 lug kit. 1250 lb capacity 4x4 bolt circle 5 9/16 OD flange with 1.98 hub ID. After installing the hubs there is excessive lateral movement in the hub. The king nut is tightened...
Is the TruRyde Equalizer # TREQ356 Available In a Kit
Does this part come in a kit like the others? I have a 2005 Keystone Outback Sydney edition model 29FBHS | We can piece together an equalizer kit for you, however the TruRyde Equalizer, # TREQ356, is not included in an equalizer kit or a hanger...
Recommended Hanger Kit for 3-Leaf Double-Eye Spring for 2,500-lb Trailer Axles - 25-1/8 Long
What is the matching bolts and brackets for e66SR? | The answer to your question will depend on your current trailer setup. If you have a single axle trailer you could use the Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front,...
Recommended Mounting Hardware for 12 Inch Electric Brake Assemblies # 23-106-09
What mounting hardware bolts and nuts are needed with the 4 bolt flange? | The brake mounting bolt for 12 inch electric brakes # 23-106-09, that you referenced are part # 7-5 for the bolt. For the matching lock washer and nut you will need...
Can Suspension Wet Bolts Be Used with Both Nylon and Bronze Bushings
In response to the reply. The reply mentions using either the never-fail or nylon bushings with wet bolts. Is this accurate? I thought a bronze bushing needed to be used with wet bolts. | You are correct that wet suspension bolts like # LC126238...
Replacement Leaf Spring Assembly for a Single Axle Cargo Trailer
I have an inexpensive 12ft. single axle cargo trailer. Over time the springs have collapsed and the axle is hitting the chassis. The axle is made by Dexter and is at 3,500 lb. I will attach two photos of the trailer unloaded. These are four...
Replacement Springs for Fulton Boat Trailer
I need to replace the four leaf springs on my Fulton boat trailer. I replaced the springs ten years ago but the salt environment here has taken its toll. The attached photo shows the worst of the four springs. It had five leafs, it’s 1 3/4 wide,...
Components of Tandem-Axle Trailer Hanger Kit APT5 Without Hangers
What is the part # for the APT5 without the 6 hangers? | I'll go ahead and list out all the components (minus the hangers) for you of the Tandem-Axle Trailer Hanger Kit for Double Eye Springs # APT5: - 2 of the Curved Equalizer for 1-3/4" Wide...
Does the Kodiak 10 Inch Hub and Rotor Assembly Come with Bearings and Seals
I wasreading the response and these are exactly what I need. It states it is is the bearings, seals, and cap. I dont see a picture of the caps and wanted to make sure before i ordered. So my question really is does it come with the caps for...
Replacement 12 x 2-Inch Electric Brake Assemblies for 2004 Winston Equipment Trailer GVWR 15850
I just picked up a use winston trailer A 2004 the GVWR is 15850 LB Each axle is 6084 LB IT has 2inch pads and a 12inch inside dim. Drum I found brake assy on you web. So here is my ? What brake assy do i need a dexter or one of the muny you...
Availability of 7/16" Conical Tooth Washer
Do you sell 7/16 conical toothed washers? I need 4, thanks! | The 3/8" Conical Tooth Washer # 01292006-020-01 is the closest we have to a 7/16" inner diameter. We have the 7/16" Lock Washer # 5-8 depending on if your application will work with...
Recommended Heavier Duty Leaf Springs For 25 Trailer With Tandem 3500lb Axles
I have a 25foot bumper pull. It has a dry weight of 6700 lbs. It has dual 3500 lb Lippert axles. I assume it has 3500lb springs, dont know. The springs measure center of eye to eye 26.25inch compressed and 25inch on one and 25.18inch on other...
Which Cotter Pin Is Needed for BK3-100 and BK3-200 for 6000-lbs and 7000-lbs Axles
Hello, Ive got a couple trailers, one with 6K axles 25580 and 15123 bearings the other with 7K axles 25580 and 14125 bearings. Id like a bag of cotter pins so I dont have to straighten the used ones out. You guys should offer an annual maintenance...
Spindle Nut Kit Recommendation for a Dexter 6k Axle
I was wondering if this is the correct parts for the Dexter 6K axle spindles.They are the D60 axles. What is the size of the nut for use of a socket? | Since the D60 Dexter Axle uses a cotter pin and castle nut the # RG05-100 would not be the...
How to Determine Axle Placement on a Custom 5 x 9 ATV and Motorcycle Trailer
Hi, I am building a 5x9 atv/ motorcycle trailer by emulating an 80s Cox 4x8. The axle was centered on the Cox and so assuming thats ok for the new one. I saw the math equasion shown here but its a little over my head, most small trailers I see...
Replacement 12 X 2 Hydraulic Brakes Duo-Servo and Uni-Servo, Plus Replacement Bolts and Washers
Do you carry an equivalent wheel cylinder that fits the 23-337 brake assembly? The old wheel cylinder is a Dexter 54-63. Also if I wanted to change braking to a uni-servo to replace the 23-337 what do you recommend? | We do not sell the wheel...
Bolt Recommendations for a Equalizer for 2 inch Slipper Springs
Looking at the TREQ 1344 equalizer. Its a homemade trailer and the equalizers are wore out. The holes are wore out. So the TREQ seems to be the right one. I need the bolts and a center bolt with the grease fitting. | For the Equalizer for 2...
Replacement Bearing Kit for 5,800 lb Lippert Axle
I would like to know: 1 Which wet bolt kit I need 2 which wheel bearing kit I need and if I just need the seals, which seals 3 It looks like the wet bolt kits do not contain the bolts and bushings for the outside ends of the leaf springs where...
I Need Wet Bolts And Shackles For My 2016 Forest River Wildwood 28DBUD
I have a 2016 Forest River Wildwood 28DBUD and I am looking for a wet bolt and shackle kit. I don’t see that model on your website. Would you have kits available for this model? Thank you. | We will definitely have kits that will work for...
Can I Replace 4 Leaf Springs With 5 Leaf Springs For The Axle On My Trailer
I have narrowed down what parts i need by looking up stock numbers on data plates found on the OEM equiped parts. The springs that are on the 5th wheel travel trailer are 3000 lb, 4 leaf, double eye, 25.125inch x 1.75. Can i replace them with...
Filter Your Search
Contact and Help