Best Locking Hitch Pin for a 3 Inch Trailer Hitch Receiver
I am looking for a locking hitch pin for a 3inch hitch. The only one I can find on your site is the one made by Weigh Safe. I have their hitch now and it is quality but the hitch pin looks a little light weight. Do you have any other products...
Is There Minimum Distance Between Ground and Bottom of Adjustable Ball Mount
concerning this model hitch what would be considered a safe distance with the overall length of the hitch? My situation, on my Thor RV-measurement from top of hitch to ground is 20. This unit is 14inch overall according to the attached picture....
Is There A 3 Receiver Tube Opening Version Of The Weigh Safe 2-Ball Mount # WS10-2
I have the new Denali that has a 3inch receiver, do you make one with the 3inch hitch? | We unfortunately do not carry a version for the Weigh Safe 2-Ball Mount w/ Built-In Scale - 2" Hitch - 10" Drop, 11" Rise - 10K # WS10-2 for a 3" receiver...
Comparing the Bulldog Hitch Receiver Locking Pin to the Weigh Safe Hitch Receiver Lock
Which receiver lock is preferable for my new 2017 F250? Bulldog Item # BD580412 OR Weigh Safe Hitch Receiver Lock for 2, 2-1/2, and 3inch Hitches - 3-1/2inch Span - WS05 | If your 2017 Ford F-250, whether you have the 3 inch receiver or the...
Recommended Trailer Tongue Weight Scale for Precise Measurements and Convenience
Hi. Im interested in the Sherline tongue scale. Do you also sell the 1000# pound capacity unit? It would probably be more accurate for lighter trailers. Steve Kight | The etrailer Trailer Tongue Weight Scale - 2,000-lb Capacity # e99044 is the...
Recommended 7 Way Trailer Connection to Fit a 2009 Porsche Cayenne
I have a 2009 Porsche Cayenne which came with the factory installed trailer hitch but does not have the seven connector female plug-in. It has a block off plate secured by four screws. Apparently US customers are supposed to purchase the appropriate...
Which Ball Mount Needed for 20111 Silverado with 3-1/2 Inch Lift
Question recently bought a truck with 3.5 lift want to buy a trailer hitch that fits my camper hitch with stabilizer s on it any recommendations | The hitch height of a truck can vary widely according to the tire sized used and the presence...
Recommended Trailer Hitch And Ball Mount For 2017 Ford F-250
Need trailer hitch for my f250 for my boat trailer,thx | We have one trailer hitch that is designed to fit your 2017 F-250. It is the Curt Trailer Hitch, part # C15802. This is a Class V hitch and it has a 2-1/2 inch receiver opening. The...
Hitch Ball to Fit Fastway e2 Weight Distribution
Will this trailer ball: WSUN-1 Work with this hitch: FA92-00-0600 Or does all the WDH riggin get in the way? | The Weigh Safe Adjustable Hitch Ball with Built in Scale # WSUN-1 will not work with the Fastway e2 Weight Distribution System #...
Adjustable Aluminum Ball Mount for 2-1/2 Inch Trailer Hitch
You sell Rapid Hitch Adjustable, Aluminum Ball Mount Kit w/ 2 Greaseless Balls - 4inch Drop or Rise Item # AM3461.. Do you have the same product available with a 2.5 inch shank? Thanks | All the Rapid Hitch ball mounts we carry, like part #...
Availability of Adjustable Ball Mount with 1-7/8 Inch and 2 Inch Hitch Ball
I DO NOT NEED THE 2 5/16 BALL. CAN I CUT IT OFF? HOW HARD WOULD IT BE FOR ME TO BUY A 2inch X 17/8BALL? | I do not recommend cutting off the 2-5/16 inch ball portion from the dual ball unit included with the Weigh Safe 180 Ball Mount # LTB6-2....
Options For Reducing Sag While Hauling A Camper On A 2010 Toyota 4Runner
Ive recently purchased a 2016 Forest River 206STSE pop up camper and am towing it with a 2010 4runner LTD. I dont have any issues with pulling or braking, but its sagging and Id like to correct this for optimal towing. Is there a WD system that...
Can The Ball Mount On The Weigh Safe 180 Hitch 2-Ball Mount Be Reversed For Storage
Can you turn the ball mount on adjustable mount 180 degrees for storage while its on the receiver, less chance of hitting my shins. Thanks | Yes, the hitch ball on the 180 Hitch 2-Ball Mount w/ Stainless Steel Balls # LTB6-2 can be reversed...
Best Anti Trailer Sway Option for a 2012 Volkswagen Touareg
I am in the process of identifying and buying a Grand Design XLS 17MKE travel trailer. I will be towing with a 2012 VW Touareg Diesel. Specs for both are: Trailer: 4674 Dry Weight 6395 Gross Weight 21ft 11inches overall length 430lbs Tongue...
Can you change trailer wheel size from 13 inch to 15 inch on the same axle?
is it possible to change wheel sizes on a trailer from 13inch to 15 inch using the same axle? changing wheel size on a trailer form 13inch 5 hole bolt to 15 inch 5 hole bolt. can it be done and how. | Yes, you can change trailer wheel size from...
Distance From Pin Hole to Curve of Shank on the Weigh Safe Ball Mount part # WS4-2
What models of adjustable height ball mounts do you have available with a distance of 6 inches between the hitch pin hole and the point where the shank takes the downward angle as the one shown The one shown in the link may work for me but...
Availability of Ball Platform With Scale for Weigh Safe LTB6-25 Ball Mount
I purchased the # LTB6-25, the Weigh Safe without the scale in the ball. Can I purchase the ball portion with the scale as a separate item without needing to buy the whole thing over again? | Weigh Safe does indeed offer the ball platform with...
Recommended Adjustable Ball Mount For 2009 Ford F-150 Towing Camper With Added Lift
I have a 2009 Ford F-150 that pulls our camper, my only issue is that our camper is a sport edition so it has a lift on the camper, my current hitch is a 2 1/2 that I flipped around to raise it instead of the , but my camper is still to tall,...
How Do You Know If You Need Sway Control on a Trailer
I have moved up from a Tundra to a 2017 F350 pulling a 28, 6000# Travel Trailer. I kept my Equal-i-zer WD hitch, but dont get much squat now with the F350. I despise the 3inch Reciever and sleeves so I was thinking about the 3inch Weigh Safe....
How to Determine the Correct Trailer Ball Mount and Measuring For Rise and/or Drop
I do not own a trailer, but have had to borrow on ocassionally. How do I choose a mount and ball size? Are there standard coupler heights and ball sizes? example: I had to borrow a trailer to take Motorcycle to dealer, probably a class 3...
What Parts Do I Need To Install A Curt Trailer Hitch and Wiring On My 2011 Ford Flex?
What are all the parts I need to mount a hitch to my 2011 limited Ford Flex with dual exhaust? How do I attach the electrical for the camper Tail lights? Thank you so much! | All the parts you need to install the hitch is included with the Curt...
Recommended Drop Ball Mount for Motorhome Towing a Trailer
I bought a 2021 Forest River Berkshire 34qs. Also have a double axle trailer to transport VW Golf behind the motorhome. Looks like the hitch receiver is too high appr. 21.5inch from floor to bottom of receiver. Also seems too close to bumper...
Could 180 Hitch Adjustable Ball Mount In Rise Position Allow Tailgate of Ram to Fold Down
Hi, I had a question about Item # LTB6-2. I understand it has a 6 and a 7 rise. Im wondering about the clearance with my tailgate if I had the ball mount in the rise position. I have a 2021 Ram 1500. I would want to be able to the tailgate...
Should I use 8 Inch Drop Ballmount or 10 Inch Drop Ballmount With 9 Inches Between Hitch and Coupler
I am interested in the weigh safe 2 ball mount system but am unsure which size to purchase. My hitch is the factory unit measuring 23 inches to the inside top edge of the 2.5 inch receiver and 14 inches to the bottom edge of the trailer coupler...
Filter Your Search
Contact and Help