Nissan  x   >   Pathfinder  x   >   !Pilot Automotive  x   >   Tow Ready  x   >  

TRYING TO FIND THE SIMPLE BRACKET THAT WILL HOOKUP THE WIRING [PLUG TO THE HITCH CAN U LINK ME TO IT? | It sounds like you are looking for the Pollak Mounting Bracket and Installation Hardware # PK12711U. You can use the included hardware to...

Hi, my pathfinder has a flat 4 connector and I need to upgrade to a 7 pin connector for a tent trailer I bought that has electric brakes. Any suggestions?? thanks | We have exactly what you are looking for! Since your 2003 Nissan Pathfinder...

Item # 118267 does this fit 2014 nissan pathfinder ? I have everything else just need this part | The complete wiring harness and relays needed for your 2014 Nissan Pathfinder is # 118273. Unfortunately, the # 118267 is not the direct replacement...

Does this hitch have a location to secure a standard trailer wiring connector? | Due to the profile of the Curt Class III trailer hitch # C13126, most of the hitch crossbar is recessed under the rear fascia of a 2013 Nissan Pathfinder. Therefore...

I have a 2008 Nissan Pathfinder and tried to rent a trailer. They hooked up the trailer and the brake and turn signals did not work on the trailer. It is all factory installed hardware and has worked in the past. Not sure what the deal is....

I HAVE A 2005 PATHFINDER , I INSTALLED WITH THE OEM PLUG, CURT TRIFLEX BRAKE CONTROLLER BUT WHEN I HOOK TO MY CAMPER THE BRAKES LOCK UP!!!!! HELP!!!! SUPPOSED TO LEAVE ON VACATION TOMORROW.. : IS THIS BECAUSE OF THE BLACK/BLUE WIRE BEING CROSSED...

Hello, I have a 2007 Nissan Pathfinder LE with factory tow package. However, its a 4 pin and I need a 7 pin. Also need a brake controller. I need some help. If I unplug the 4 pin, then this should work correct?C56226 What are the blue and...

I installed the T-One wiring harness with 4 pole flat connector 118670 on my 2018 Nissan Pathfinder S and it worked perfectly. I already had the relays under the hood so I did not need them. I then decided to add a 7 way connector so I ordered...

Regarding part # 118267 from my recent ORDER : I am trying to get my ready to safely bring a trailer home next weekend. My tow vehicle is a 2005 Nissan Pathfinder. It has a factory tow package w/ relays, an input for a brake controller, etc....

I just purchased a Part #118266 Nissan Tow Package wiring harness w/relays- 7 Way. The installation went perfect, everything was as described in the instructions. My problem is that after the installation the passenger side window would not...

Hello I have a 2007 Nissan Pathfinder with a 4 pin flat plug. Buying a pontoon with a 5 pin round plug. The fifth pin blue wire for the surge brake cutout when backing up. I ASSUME I need to wire in the backup lights... Please tell me what I...

New 2020 Heritage tandem boat trailer with reverse lockout hydraulic surge brakes Want to convert OEM 4 way flat to 5 way flat connection to properly allow for instant backing/launching without manually installing the metal brake lockout...

I purchased 118267 Tow Ready Replacement OEM Tow Package Wiring Harness - 7-Way - Nissan Suzuki, which indicated it Connects directly to standard OEM connector , but the plug is a 6 wire and my 09 Pathfinder has an 8 wire, so it does not work....

Im getting a couple different stories , a local shop said they could do it for 200+ labor , another friend who owns an rv co said it should cost less than 100 . Im looking on here and and its even cheaper . But i lack the knowledge to install...

I sold my 2001 Pontiac Aztek and purchased a new 2011 Nissan Pathfinder. I need to buy a brake controller and a 7 pin plug with associated wire adapters so I can tow my pop up camper. Thanks | If your 2011 Nissan Pathfinder has a factory installed...

I need a 6 pin towing wiring adapter for my 2009 Nissan Pathfinder. I want to tow a pop-up camper, I want to be sure that I can charge when towing. I had a 2006 and that needed relays under the hood, does this need those as well or is it all...

I have a 2009 Nissan Pathfinder with the factory tow package installed. It currently has a 4 pole connection. I want to add 118267, C51382, C51120, C58000 so that I can pull our new camping trailer and utilize the trailer brakes installed on...

I recently purchased a 7 way wiring harness to replace my 4 way harness for my 2005 Nissan Pathfinder because I purchased a camper with electric brakes. After installing the new harness things did not work correctly. The lights worked perfectly...

We have a 2003 Nissan Pathfinder and I installed a 4 way trailer hitch wiring on. We need a 5-way adaptor for the boat trailer we are about to buy. Can I use a 4 way 5 way adaptor? If not is there a 5 way wiring system for our vehicle? I...

I have a 2019 Nissan Pathfinder and am buying the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2 I will be pulling a boat and need trailer wiring for lights, etc. What do I need for that? The video wasnt specific. ...

My 08 Pathfinder 4-way connector has an 8 pin connector not a 6 pin like 118267 contains. Is there a 8-pin to 6-pin converter/adapter or a different harness I can purchase to fit? | Some Nissan vehicles came with that 8-pin connector rather...

have connected the wire harness from nissan and installed relay two for a 7 pin connector. i still cannot get the charge wire hot? doea the factory wiring have a battery charge wore standard or am i missing a part?? | On your 2008 Nissan Pathfinder...

I am planning to pick up boat that is about 4 hours away and I am not very experienced in towing a boat. The tow vehicle is a 2013 Pathfinder with a hitch already installed. So, I need to buy the connecting pieces between the hitch and trailer....

What do I need parts to be able to connect a travel trailer with electric brake and 7 pin connecter to my 2017 pathfinder. I don’t have factory tow package but I have installed a tow hitch and 4pin wire plug in the car. I used the kit that...