Recommended Custom Fit 5th Wheel Installation Kit For 1991 Ford F-350 Crew Cab W/ 8' Bed
Do you sell a 5th wheel rail mounting kit for my 1991 F350 crew bad long bed that has the custom frame rail brackets or just the universal kit? | There is one option for a custom fit 5th wheel installation kit which is the Custom Underbed Installation...
Will The MORryde MR34AR Shock Absorbing Equalizers Fit A 2021 Vengeance Rogue Armored 4007
We have a 2021 Vengeance Rogue Armored 4007 with lippert 7000lb axles. I want to upgrade the suspension with equalizers and a shackle wet bolt kit. There are so many different choices for equalizers. Are there pros and cons for each? Which...
Can I Safely Tow 12k on My 10k-Rated 1993 Chevy K3500 4x4?
1993 chevy k3500 4x4 7.4 dually i need to be able to tow 12000lbs.rated at 10000 can this be done?crew cab | If your 1993 Chevy K3500 4x4 has a tow rating of 10,000 pounds, there is no way to safely tow 12,000 pounds unless some of the weight...
Recommended Hitch Plate Bumper for Ford F-350 Cab and Chassis w/ 34" Frames
will this item fit my 86 F350 Chassis cab? Thanks | I have a solution for you but the Buyers Products Hitch Plate for Pintle Mounting item # 3371809030B only fits 1999 and newer Ford F-350's. For your 1986 F-350 Cab and Chassis you will want...
Recommended Tire Chains for a 1988 Ford F-150 with 235/75R15 Size Tires
I have a 1988 f150 300i6 with 235/75r15 tires and I live in nebraska. I would like to know what are the best chained snow chains do you provide that wont break the bank. They cant be made out of cheap chain either. Something that is reliable...
Replacement Fan Clutch and Blade For 1984 Ford F-250
Will this fit 460 in my 84 f250 | I may have an option for you but Flex-A-Lite does not have a proper belt driven fan for the 1984 Ford F-250. You will need Derale Thermal Fan Clutch part # D22052 and one of the following fans depending on...
Installing Trailer Brake Controller on a 2006 Ford F-150 with Factory Installed Brake Controller
I am about to remove my 06 Ford PU oem brake control and install the Prodigy 2 that I purchased from you last week. The oem brake control has two plug- ins at the rear. Do I remove both plug-ins? | According to our FAQ, which I have linked for...
Hopkin EasyLift Tailgate Lift Assist for 1988 Ford F-150
Is this lift assist compatible with my 1988 F150 tailgate? If so, what model number do I request? | The Hopkins EasyLift Truck Bed Tailgate Lift Assist item # 74211 is compatible with your 1988 Ford F-150 so long as it is NOT the step-side...
How Much Does the Buyers Products Hitch Plate for Pintle Mounting Weigh?
what is the weight of this item? | The Buyers Products Hitch Plate for Pintle Mounting item # 3371809030B weighs 110 lbs. It has a maximum gross trailer weight of 20,000 lbs. |
Are Thule Xsporter Pro Crossbars Compatible with a Side Load Assist?
Is the Rhino Rack Universal Side Loader bar compatible with the Thule Xsporter Pro Cross Bars? Thanks for your help! | The Thule Xsporter Pro Adjustable Height Truck Bed Ladder Rack - Aluminum - 450 lbs - Silver # TH500XT has load bars that...
7-Way Trailer Wiring Solution that Fits 1991 Ford F-350
I have a 1991 f350, I currently have the 5 pin t connector that hooks up to the factory wire harness underneath. So now im trying to get a 7 pin connector on my truck, and I am having a bit of a hard time trying to find the right one, although...
Does Bargman Trailer Taillight 30-84-509 Fit Both Sides of Trailer
Is there a right side and a Left side?? How about the gasket do I have them | There isn't a left and right side version of the Bargman trailer taillight part # 30-84-509. You can run either on either side. These also do not require a gasket...
Underbed Mounting Brackets and Hardware Only for 5th Wheel Hitch Installation on a 1985 Ford Truck
Which mounting parts do I need for a reese 14k. Its going on a 85 ford long bed. I have the hitch abd thw rails. I dont have the brackets for the frame or the bolts either | Since you already have the rails and the hitch, all you will need is...
Extending a 2 Inch Trailer Hitch 30 Inches to Clear In-Bed Camper when Towing a Boat Trailer
I have a 2inch by 2 inch receiver hitch. I bought a slide in camper that overhangs the pickup bed 18 inches. Now my boat trailer tongue is to short to make turns.Help. I need at least a total of 30 inches extention. Boat trailer tongue weight...
Our 1985 Ford Econoline 350 28 ft. Class C motorhome does not have stabilizing jacks. Im used to the stability of jacks from my days with a pop up camper. I crawled under the rear and found 2 V-shaped brackets welded to the frame. Could scissor...
5th Wheel Trailer Hitch Installation Kit for a 1998 Ford F-250 and RBW Lil Rocker Hitch
have a15k lil rocker and no mounting kit it will go in a 1988 f250 can u tell me what kit i need | For a 1988 Ford F-250, short or long bed, you can use Reese installation kit # RP30035. The RBW Lil Rocker 5th wheel hitch will fit in the Reese...
Magnetic Base Strength of Kats Heaters Handi-Heat with Thermostat
Is the magnet strong enough to leave the heater attached to the oil pan and drive or does it have to be taken off every time and how long till it cools down enough to take off? | The Kat's Heaters Handi-Heat Magnetic Heater w/ Thermostat - 120V...
How Does Draw Tite Hitch for 1986 Ford F-350 Install
looking at a hitch for an 1986 f350 dually. all these options appear to mount on TOP of the frame, vs in the factory location where the bolts go thru the side of the frame. perhaps your descriptions are a bit off or the photos of the hitches...
Air Lift Air Springs for a 1988 Ford F-250 That Are Compatible w/ a B&W Gooseneck-5th Wheel System
I want to install on my F250 1988 4x4 an Air Lift LoadLifter 5000 Ultimate Plus #AL89215 and I would like to know if there is a way to also install this Custom Under Bed Installation Kit for BandW Companion 5th Wheel Tow Bars #BWGNRK1110 -5W...
What is Material of K-Source Replacement Side Mirror KSH3661 Made Of
Are the mirror heads made of ABS or metal? | The mirror housing of the K-Source Replacement Side Mirror # KSH3661 that you mentioned is made of a plastic with a chrome finish. |
How to Use the RBW Lil Rocker 15K 5th Wheel Hitch on a 1984 Ford F-250 with an 8 Foot Bed
I am looking for a mounting kit and rails for a RBW Lil Rocker 15k to mount to my 1984 f250 long bed heavy 3/4 ton diesel. | The RBW Lil Rocker 15K 5th Wheel Hitch uses industry standard rails (ISR) therefore I recommend using the Demco Installation...
Tailgate Assist Recommendation for 1989 Ford F-350
I am looking for a tail gate assist to fit my 1989 ford F 350 lariat dual wheel truck, will this fit? is it durable or how often does this unit good for, thank you for you time. | For your 1989 Ford F-350 we have the Hopkins EasyLift part...
Economically Priced Fifth Wheel Hitch and Rail Kit Recommendation for 1985 Ford F-150
Got 1985 f150 need any can of hitch thats cheap to pull it home | For a economically priced hitch the Reese fifth wheel hitch part # RP30047 can be used in your 1985 Ford F-150 with the universal rail kit # RP30035 installed in your truck bed. |
Does Ultra Fab Landing Gear kit part # UF17-943010 Have Capacity for Trailer that Weighs 14,730 lbs
this support the rv, or will I need to find heavier duty landing gear for my 5th wheel? Thanks | The pin weight of a fifth wheel trailer is normally right at 20 percent of the total trailer weight. If your trailer weighs 14,370 lbs it would...
Filter Your Search
Contact and Help