How to Determine Fit of Fulton Single Axle Trailer Fenders F008585-2
Will item #F008585-2 fit my 1995 Tracker boat trailer that has 15 in tires | Fenders are universal parts and not fits for any specific trailer, so you'll need to do some measuring to determine if the Fulton Single Axle Trailer Fenders # F008585-2...
Replacement Fulton F2 Trailer Tongue Jack With Dual Wheels and Sidewind Handle For a Boat Trailer
The housing that shows in the diagram as # 9. Is that part available. The part where the end of the handle goes thru, is cracked, due to lubrication it appears. I just bought the boat and trailer and doing preventative maint. I noticed this Let...
Can Fulton Bolt-On Sidewind Snap-Ring Trailer Jack # FTJ12000101 be Installed with Weld-On Plate
Do you have the weld on plate for the Fulton Trailer Jack FTJ120W0301. I have the TJ12000101 jack, and want to weld the back plate onto the trailer, rather than use the mounting brackets around the tongue of the trailer. Thanks so much for your...
Dimensions of Replacement Friction Disc for Fulton 1,500 lb Trailer Winches # F143100 and # F142201
What are the actual measurements please. | The Replacement Friction Disc, part # F501115 (for Fulton 1,500 lb Trailer Winches # F143100 and # F142201) has an overall diameter of 2-1/4 inches, center hole diameter of 1/2 inch and a thickness...
Trailer Jack Replacement for Shelby 5862A
Hi, I have a Shelby trailer jack, model 5862A. it is a bolt on swivel type rated for 1000 lbs. i’ m not 100 on the lift but i think it has a 10 inch lift. i’d like to purchase a Fulton model and am looking at the FTP10 and FTJ12000101 models....
Swivel Weld-On Jack Recommendation
do you have a bolt on jack with a leg or do you have a swivel mount kit for the square leg jack that can be welded on | If you are looking for a swivel jack that can be welded on the Fulton Jack part # FTJ120W0301 would be a great option....
Offset Spare Tire Mount for 6-Lug, 15 Inch Wheel
Can you tell me if this part CE27310G is suitable for my 15 wheel which has a 6 hole on ~ 5 1/2 circle and ~ 4 1/2 inch separation for nearest neighbors as shown in attached photos. Looking for an offset mount similar to this one. | We do have...
Is Mounting Bolt Pattern of Fulton F2 Winch the Same as XLT
I am on my 2nd F2 winch and once again the gears are slipping on my 5k lb boat. I’m looking at your XLT winch due to it looks like it’s easier to change cranking direction. Is the bolt mounting pattern the same on the F2 and XLT or will I have...
Replacement Winch Option For A Fulton T2005 Hand Winch
Questions about parts for my Fulton modine boat winch. T 2005. May need a new handle. Looking for part number. Winch has two speeds. | I took a look at what we have for your Fulton T2005, and it turns out that this winch has been discontinued...
Replacement Handle for a Fulton F2 1600 Capacity Trailer Jack
Needing a replacement handle for the fulton f2 1600 capacity trailer jack. Dont see a model number on the jack? | The Fulton F2 trailer jacks use replacement handle # F500134. It includes the handle, pin, and hardware. |
Will Fulton 1600 Pound F2 Swing-Up, Wide-Track Trailer Jack Fit a 3 x 1-1/2 Inch Frame
I have a trailer with a 3X1 1/2inch channel iron frame. Do the smaller 3inch Im assuming U-bolts threads go far enough up the bolt to tighten down on a 1 1/2inch wide channel iron? | A bolt through jack like # F1413040134 is not going to work...
Looking for Trailer Coupler for 3 Inch Channel Tongue With 2-1/2 Inch Mounting Hole Spacing
Hi folks, Im looking to replace my straight trailer coupler for 3 inch channel and 2.5 inch mounting hole spacing with a 1 7/8 inch ball. However, I can not find any replacements with these dimensions. First alternative could be to move...
Distance From Mounting Bracket U-Bolt To Ground On Fulton Jack # F1413020134
Swing Arm Jack Stand with Wheel I need a jack stand w/wheel that is short from the ground to the bottom of the mount when fully retracted. I tried one locally and it would not allow me to swing the stand when the trailer was attached to my...
How are Fulton Trailer Fenders # F008554 Mounted Typically
Have a small trailer. Fenders are inside trailer. I need new ones. How are the fenders mounted. Is mounting hardware included? Fulton Single Axle Trailer Fender with Top Step - Black Plastic - 14inch Wheels - Qty 1 Item # F008554. Thanks in...
Trailer Jack Recommendation for Boat Trailer in Saltwater
I am looking for a tBoat trailer tongue jack for saltwater environment. Is there an aluminum and ss Jack on the market? | For your boat trailer the weld-on Fulton jack part # FTJ120W0301 would work well as it has more than enough capacity at...
Mounting Brackets Needed for Fulton Single Axle Trailer for 13 Inch Wheels
Is this the bracket need for fender 008573 so we can stand on the fender? MJ | To install the Fulton SIngle Axle Trailer Fender with Top and Side Steps # F008573 onto your trailer, you can use hardware from previous fenders or L-brackets like...
Are Fulton Hand Wheel Trailer Couplers Secure or Can they Loosen Up While Driving
I have always used couplers with the fast lock device. Once they are in place, I have always felt secure about them not coming off. How likely is it for the hand wheel design to loosen up while driving? Im thinking about ordering one for...
Will Lippert Components Gear Box Fit Fulton Landing Gear
Will the Venture Aluminum Gear Box replace a Fulton Plastic/Composite Gear Box? The dimensions on your video look like everything will fit well. Im just looking for some feedback before I order. The little gear in the plastic housing driven...
Replacement Fenders For European Dog Trailer
I have a European made trailer for hauling dogs. I need replacement fenders. Do you have an email address where I can send photos and measurements, so you guys can help me buy the proper replacements? Thanks! | The fenders we offer are all...
Trailer Hub Dust Cap for 1.940 Hub Bore
Hi. I need bearing hub dust cap. The inside diameter of the hub measures between 1.936 to 1.940. The 1.986 that I bought doesnt work. Thanks | Are you sure you didn't order a cap for a 1.968 hub bore? We don't offer a cap for a 1.986 bore. The...
Coupler Upgrade on Old Utility Trailer for 2 Inch Hitch Ball Compatibility
Question re: Couplers I have 2 trailers Boat and Utility both rated at 2,000 lbs GVWR. The trailers have 1-7/8 and 2 ball sizes. The 1-7/8 boat coupler is old and should probably be replaced. Is there any reason why I shouldnt convert it...
What are the Inner and Outer Leg Diameters for Fulton Bolt-Thru Swivel Marine Jack FXP15
Are the given tube diameters the inside or outside measurement of a tube? I need a replacement cap for a tube with an inside diameter of 2. Thanks | When you see inner tube diameter and outer tube diameter on a trailer jack product page it...
How Much of the Trailer Tongue Needs to Go Inside Each End of a Fulton Trailer Tongue Hinge Kit
What is the minimum amount of trailer length I need to install the coupler on the boat side of the hinge? I bought an older trailer with my boat and someone made a homemade pivot that failed. I have 2 inches from the cut to a weld point where...
Can Fulton Spare Tire Carrier FSTC1000301 Be Installed on an Angle Iron Body Trailer
In the video for the angle iron trailer, you are using a piece of angle iron against the angle iron top rail to give a flat mounting surface simulating box tubing, my question is how did you fasten the short piece of angle to the top rail before...
Filter Your Search
Contact and Help