Result: knobs

The rack comes with an aluminum ramp that allows you to load up and remove your heavy bike with minimal effort, and also completely folds up and has wheels and a handle, so getting it from storage to your TLX (and vice-versa) is simple; it also installs easily in your hitch; tightening with just the twist of a knob. |

I like the Thule XT for 5 that folds down when not in use and has the locking knob. I would love for it to move out of the way to access the rear but I think stability for driving is more important for me and i think the video said that it is better for that with this edition. |

Adding the Yakima HandCuff Cable Lock # Y02466 will allow you to secure your bikes to the rack, and the lock on the speed knob will secure the rack to your vehicles trailer hitch receiver. | Looking for a good 4-bike rack...

The Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR can be mounted just about anywhere that the wires can reach, and there is enough room behind the button. The button or knob requires at least 1 3/4" of depth and 3/4" width of space to mount up. |

I really like the Redarc Tow-Pro Elite # RED44FR because it can be installed virtually anywhere and the control is just a small knob and it uses color coding to let you know what is going on. | Hi what do you suggest for a...

The main unit hides behind the dash while a small control knob is all you see on the dash. This controller uses the Plug-and-Play Wiring Harness # RED67FR to connect to the factory wiring on your Jeep. | Will the 3.2L V6 Jeep...

It also installs in you hitch with just the twist of a knob at the front of the rack and comes with locks for the rack and your bikes. | I am looking for a platform hitch rack that will carry a small framed Trek Ebike with...

The Curt Spectrum Trailer Brake Controller # C51170 which is a proportional unit that when installed you only see a control knob that allows you to adjust all of the systems settings, and 10 tri-color LED lights to display settings and diagnostics. |

This is an excellent system that offers a small OEM-style control knob to maintain a clean appearance in the vehicle (check out a couple images I attached that show some different mounting options) along with the unique ability to switch between manual and proportional modes so you always have complete control. |

I think I need the Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4 - 24897 because a it has greater clearance off the back of the bumper to allow the attachment knob on the bike rack to tighten easily your video says it sticks out 1 inch further than the Curt and a reviewer of the bike rack said that a Curt hitch made tightening the rack very difficult, and b it is easier to trim the underbody panel, which must be done for the Energi to protect the battery compartment. |

The on-demand hot water and ability to set the temperature to a specific degree instead of the old fashioned arrow knob will make camping much more enjoyable. The # FR98SR has the following requirements to properly operate: 12VDC Power Input. 7.2-65PSI water Pressure (40-50PSI recommended). |

The Tow-Pro Elite controls the brakes with a control knob that, like the Echo, also keeps a cumbersome unit out of the cab of your truck. | What is the best trailer brake controller for 2019 ram 3500? Also would i be able to...

You will also want to have access the manual override knob when needed to power the brakes manually. | Have a Tekonsha p3 brake controller on a 2016 Jeep. Want to move it to a new 2018 Jeep, so Im going to need a new wiring...

It also has a locking knob to secure the bikes to the rack. With a hanging bike carrier, I recommend adapter bars like # 64005, for any bikes that lack a top tube in the frame. | Adjustable Width Trailer Hitch Receiver for...

The NV 2.0 can be tilted down - even with the bikes loaded - with the press of a handy foot lever; it does not require any tools to install into your hitch as you'll only need to turn a knob to tighten the shank in the hitch and this also works as an anti-rattle device for a quiet ride. |

It works with trailers that have up to two axles. It has a control knob that allows you to very easily make brake adjustments. | Brake controller for 2022 Subaru Outback. I am a novice at towing and would like your recommendation....

This means more clearance between the rack's anti-rattle knob and the bumper but it also means that the NV rack will sit that same 2-1/2-inches further back. | I was watching your videos covering hitch racks for the 2015 Subaru...

Its like they were designed to cover the front door knob of Ft. Knox?? But were spoiled - we still have a 2005 Arctic Fox truck camper, and several years ago when I replaced the incandescent bulbs with soft white LEDs, I removed the milk white lenses with only a soft squeeze and simply twisted the bulbs out and in. |

The rack comes with locking torque knobs that will secure your rack to the roof of your vehicle. | Do Yakima jet stream cross bars work with Inno feet | Inno feet only work with Inno crossbars. The Inno roof rack for your 2012...

All you do is install it in your hitch and tighten a knob and you're set. I have added a link below to a video review for you to check out as well of the Thule Apex XT 5-Bike Rack # TH9026XT. | Can you suggest a roof box that...

This can handle up to 6 brakes (3 axles) and has one of the cleanest looks after being installed, if not the cleanest, as only the adjustment/manual override knob will be visible. If I were in the need of a brake controller in my truck, this is absolutely the controller I would go with. |

This controller has a factory clean install where the main control knob of the controller is mounted on your dash and the main unit is in an out-of-the-way spot. | I just picked up an Aliner Ranger 12 after having an OEM...

But with the Redarc brake controller it uses a remote mount system, where all you see is the control knob, the rest of the unit can be mounted under the dash out of site. | I need a 7 way and a brake controller for my 2020...

I only got 3.4 volts at 7 pin plug and output at controller connector on truck With full power on knob and slider | Should it be 12 volts and the current change or voltage change only? I only got 3.4 volts at 7 pin plug and...