Why is the Ride in the Back Seat of an F-550 So Rough, and is There Anything That Makes it Smoother
How can I eliminate or reduce the out of control stiff jumping of rear suspension which prevents using back seat for passengers? Do you offer a air bag suspension which solves the above problem? | The crazy rough bouncing of the rear suspension...
How Far Apart are Install Holes of CIPA Door Mounted Mirrors CM45000-2
What is the distance between the outside holes that bolt to the top of the door? My current mirrors are about 5-7/8 inches center to center. Will these work with that? | Hey Tim, the mounting holes on the top bracket of the CIPA Door Mirror...
What Size Baby Moon Cover Size Fits Trailer Wheel AM20514
Regarding Part Number: AM20514, I would like to know the necessary center cap size, as I’d like to use my own, which are 10 1/8 inches. I’m just waiting for compatibility confirmation to make the purchase. | Hey Michael, the baby moon cover...
Does The GE Appliances RV Refrigerator GE58FR Come With A Mounting Bracket?
Does this with mounting brackets? | Hello Raymond, thanks for reaching out. The mounting brackets are not included with the GE Appliances RV Refrigerator # GE58FR. It requires a GE approved top bracket part BMT-GPV10. This is not something we...
Brake Controller and Install Recommendation for a 2012 Ford E450 RV
Where do I find the factory harness behind the dash to connect to the aftermarket brake controller on a 2012 Winnebago Chalet on an e450 chassis? | I just checked with Tekonsha and they confirmed that the Tekonsha Plug-In Wiring Adapter # 3034-P...
Location of Brake Controller Wiring Connector on 2014 Fleetwood Bounder on Ford F-53 Chassis
We are purchasing a2014 Bounder Classic On a Ford chassis and would like to know if There is a factory installed wiring harness which Would allow for a simple plug in? | On the 2014 Ford F-53 chassis the brake controller port is located on the...
Does Locking Hitch Pin part # C23519 have a Weight Capacity
What is the tow wate for this pen. I tow a 2016 Chevy Silverado be hind a moterhome. I need to know if this pen is strong enough. Thinks | Hitch pins don't have weight capacities because they don't actually bear any of the trailer weight. The...
Amount of Drop Provided By Curt Class V Hitch, part # C15845
Wondering what the distance to top of receiver cross member from frame mount, also Is there a sleeve available that allows use of 2inch ball mount? I checked on the 2inch model and was told it s 5 1/2.....I need about 6inch to clear bumper/step...
Replacement Jack For 2001 Stratos Bass Boat Trailer
I have a 2001 Stratos Bass boat with a Fulton center bolt swivel jack onto a welded plate on the trailer. I would like to upgrade to the Fulton F2. My holes on the plate are 3X3 on center. Will the F2 work? Can I send you picture? Thank You...
Hitch for Bus on 2006 Ford E450 Cutaway Van Chassis
I have a 2006 Ford E450 Cutaway Chassis with 25 passenger body installed. I am looking for a rear tow hitch . Measurement from outside to outside of rear frame rails is approx. 42 1/2 inches. From back of body to flat surface of bumper is 7...
Solution for Trailer Hitch Receiver for 1956 Chevrolet 3100 Task Force
Looking for a trailer hitch the bolts right on to my 56 Chevrolet 3100 task force | I do have a solution, but there are no custom-fit bolt-on hitches for your 1956 Chevy Task Force. What you can use is the Curt Adjustable Trailer Hitch Receiver...
Installing Brake Controller on 2014 Motorhome on Ford F-53 Chassis
Hey Guys I need to install a Brake controller on a 2014 F53 chassis. It has a flat 4 factory triler plug on it. What adapter do I need to hook up a Hayes G2 brake controller or is there one? Thanks | My contact at Tekonsha didn't have...
What is the Battery Life for Hopkins Wireless Magnetic Tow Lights
What is range of battery life for these lights? The check battery level indicator light every 2 hours statement has me concerned. I drive for much longer stretches than that and dont wish to carry excessive spare AAs or replace them every couple...
Installation Instructions for Wiring a 2008 Volkswagen Rabbit to Tow a Trailer
My question is about the electical hook-up. Can I splice a 4-flat connector directly into the wiring harness, or do I need some kind of powered module dure to the fact that it6 haqs LED lights? | Due to the MX (Multi-Plexed) wiring system on...
Why is a Stabilizing Strap Recommended on Curt Hitches and what is Meant by Non-Trailer Load
What is meant by stabilizing straps for non-trailer loads? | Non-trailer loads are hitch accessories like bike racks and cargo carriers. Basically anything that is not a trailer that you could put on a hitch. Curt recommends you use a Curt Trailer...
How Long are the Rods In End Link Kit for Roadmaster Sway Bar 1139-153
how long are the rods ? | I spoke with my contact at Roadmaster and the length of the rods on end link kit # RM-590039-00 are 18 inches from eye center to eye center. |
Brake Controller Wiring Harness for a 2014 Fleetwood Storm on Ford F-53 Chassis
I own a 2014 fleetwood storm . I believe it is a f-53 frame. I have a prodigy brake control. I looked under my dash and I see a male attachment that looks like it can mate #3035p . There is no sticker on this plug Im just assuming it is for...
Availability of Air Bag Suspension and for 2011 Ford F350 Cab and Chassis with Utility Body
Will the F2404 air bag kit work on a 2011 Ford F350 Cab and Chassis with single rear wheels? It has a utility body mounted on it. Also, is there an on board compressor kit available? Thanks | I spoke with my Firestone representative regarding...
Is Trimming of the Foam Absorber Required for the Curt Hitch On a 2010 Mini Cooper Convertible
have a question about hitch and hard form . I removed the bumper today for preparation for hitch installation. The bumper has the hard foam but it is wedge between the front and back metal bumper with a full metal back hard foam cannot be...
Trailer Hitch Recommendation for a 2003 Coachmen Mirada on a Ford Chassis
will this fit a 2003 coachman mirada on a ford chasis | We may have a trailer hitch that will work with your 2003 Coachmen Mirada, however the Curt Custom Fit Class V Trailer Hitch, # C14048, that you referenced will not fit Class A motor homes....
Replacement Curt Trailer Hitch Hardware Kit for a 2009 Volkswagen Rabbit
Hi - I recently received a CURT C11074 Trailer hitch for the 2009 VW Rabbit from a friend who no longer has their MK5 rabbit. Is it possible to purchase *only* the replacement mounting hardware for this specific mount instead of the generic...
Extendable Towing Mirrors Needed for 2003 Ford E-350
Id like to send a picture of my 2003 e-350 mirror to see if you have a tow mirror extension that would fit. Is that possible? | You can definitely send in a picture for me to verify a tow mirror fit for your 2003 Ford E-350. If you have manual...
Baby Moon Hub Caps for 1958 Chevy Apache Pickup with 17.5" Wheels
I have a 1958 Chevy Apache 3/4 ton pickup with 17.5inch wheels. i am missing one babymoon hubcap. the wheels have tabs on them to hold the cap on. do you have a replacement cap? | I did some looking around and it looks like we only have baby...
How to Prevent Exhaust Components from Contacting the Trailer Hitch
I purchased the replacement CURT trailer hitch hardware from eTrailer for this hitch and installed the 11074 on my 2009 4DR Rabbit. However - after install, I now experience a lot more noise at low RPMs. Theres vibration being transmitted back...
Filter Your Search
Contact and Help