Result: knobs

The knobs themselves are 2-1/4" in diameter and 1-1/2" tall. | how many inches are between the ladder rack knobs that screw into the deck rail. I want to know if my tool box can fit in between the rack when installed in a tundra...

Im looking for replacement knobs for a Rola Haul your might truck rack. Also wondering if knobs from another brand of rack might work. | Im looking for replacement knobs for a Rola Haul your might truck rack....

If you instead went with the Junior Latch part # L1883 you could then use the knob part # 4PLSP but there isn't a knob solution for the # N1980. | Will the inside doorknob fit or can be used on the N1980 Junior...

| The Inside Knob for Locking Stainless Steel Flush Door Latch # 4PLSP has a 1/4"-20 thread pitch. | Could you please tell me the thread pitch of this knob as i am trying to match it to a latch i have and would like to make...

The box can then be placed as far forward in the truck bed which will butt it up against the forward-most ladder rack knobs. You could then have the bolt that the second set of knobs uses go through the sides of the box and thread on the knob from the inside of the box to hold the toolbox in place though this may require a longer bolt. |

I called my contact at Redline and the knob that can be used on the inside of the door is part # 4PLSP. | Can you buy an inside release for this? If so, how can you get one? | The Steel Flush Door Latch, part # N3980 has a threaded...

Another option is basically the same door latch that comes with the knob already in place. It is # L1833. | Does this open from both sides? | The Locking Stainless Steel Flush Door Latch, # L1883, has a threaded hole on the...

Can this latch be opened using the inside release knob when the lock is locked? Or does the lock prevent opening from the inside as well? | Can this latch be opened using the inside release knob when the lock is locked? Or...

Do you have a replacement Knob for a Fulton jack handle I know you offer 2 replace handles...but just wondering if a Knob is available? | Do you have a replacement Knob for a Fulton jack handle I know...

If you need to obtain multiple locking flush door latches then you will want to use the Full Size Locking Steel Flush Door Latch part # L3980 as they all come with the same key. The inside door knob can then be added with the Inside Knob for Locking Stainless Steel Flush Door Latch part # 4PLSP. |

The Rola rack uses four locking knobs on each upright to secure itself inside the rails on your truck. | does the sliding tracrack fit a 2017 tacoma ?does the rear rack slide forward? | I do have options for you but they do...

Will this knob fit a 1979 Rockwood pop up tent trailer door | Will this knob fit a 1979 Rockwood pop up tent trailer door | Valterra Keyed Entry Door Knob # L32CS000 is made to fit RV and mobile home doors that are 1-3/8 to...

The knob controls the braking power and also acts as the manual override. | • Bolt diameter of Part : RV54FR • Trailer brake controller and plug-and-play adapter to fit: 2022 Fleetwood Discovery 36Q motorhome with the Freightliner...

In order to open the Full Size Locking Steel Flush Door Latch part # L3980 from inside the trailer you will want to use the Inside Knob for Locking Stainless Steel Flush Door Latch part # 4PLSP. | Does this come with interior...

The knob on the male part is right at 19/32 diameter. | The knob on the male part is right at 19/32 diameter. Will this part work? | Since the hole diameter of the Replacement Nylon Socket # DH600S 1/4" I recommend just getting...

I also have the Redline Door Latch with Inside Release, # L1833, which is the same latch but with a knob installed on the interior side of the latch to provide an inside release. | Can I get 8 of these latches keyed alike? |...

Based on the dimensions you listed the correct replacement latch would be part # L1930 which is a junior size latch. This has the knob on back side of the latch. For one that has a flat back you'd want the part # L1883. | Looking...

We currently do not have any slam latch style latches this will work with since the industry switch to latch style slam latches like the Item # LC54PJ rather than a turn style knob or handle. | Redline Locking Linch Style Door...

The base of the rack could be left on if you wanted to unbolt them from the feet but realistically it would be easier to just remove the feet all together since they install with knobs that don't require tools. | Ill be using...

This automatically latches when the door is shut and you can open it from the inside with the Knob # 4PLSP. This door latch fits doors up to 1-1/16" thick so it will be perfect for your application! | Hi, I have an older Sidekick...

As the factory bed length on your truck is 62", I recommend placing the ladder racks 50" or so apart from one another. The knobs located on the brackets inside the bed rail will loosen to reposition the racks then tighten back down once you have them in their desired location. |

It does have a stainless spring and rustproof finish. Use the Inside Knob # 4PLSP to allow you to open the latch from inside your trailer. | I am looking for a stainless steel locking paddle latch with an inside release....

Once the Rola Haul-Your-Might T3 Truck Bed Ladder Rack # 59799 is installed in the bed of your Toyota Tundra it will be easy to remove by loosening the the 8 knobs, and sliding the racks out of your deck rail system. | I’m...

To open for the inside, I recommend using the Inside Knob for Locking Stainless Steel Flush Door Latch part # 4PLSP. | I am looking at #L1883 and am wondering how far above the flange does the actual latching piece protrude....