Result: knobs

My RV has an entry door made by dexter. I was looking for a door window to fit my 12x21 rough opening. | My RV has an entry door made by dexter. I was looking for a door window to fit my 12x21 rough opening....

The Liberty has a unique installation method where the main unit is concealed behind your dash and the only part visible is the control knob. You will need the Universal Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item # RED69FR to complete the installation, since your Highlander does not have the tow package. |

As for a cover, if you're referring to the covers that fit over the whole unit you could use one like the MaxxAir II RV and Trailer Roof Vent Cover # MA86JR. If you're referring to the lid of the vent then you'll also need to know the model number of the vent in order to get the correct lid or use a universal-fit lid like part # MA00-335001 or # MA00-335002. |

I need a replacement screen and frame for my travel trailer. The old screen and frame is a ventline. I don’t know the model number. Didn’t see one on the frame. The dimensions are 13.5” by 13.5” by 1.25” thick. The hole for the turn knob is...

Trying to find a replacement lid for this roof vent on my 2018 sandpiper 372lok. Lid blew off with the wind and can’t seem to tell from the photos on this website which one is correct. It is 14x14. No fan just a turn knob on the inside. | I'd...

So long as the dimensions are the same and your inlet shanks are the same type, the RV Shower Valve w/ Vacuum Breaker - Dual Knob Handle # 277-000046 should be a great replacement for your current valve. |...

If you want to mount the control knob in one of the open dash panels, you can also use the Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob # 331-TPSI-002. | I pyrchased a new pull type...

If your vehicle does not have a 7-way adapter at the rear of your vehicle, but it has a 4-pole connector, the last part you need for your installation is the Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires, part # ETBC7. |

Be sure to determine a location on the dash where you will be mounting the actual controller knob so the cable from the control knob can reach the control module mounting location under the dash. | Thanks...

Hello- I have a Coleman 45000-0762 which I see it’s a Mach 10 Heat Pump Style I am stare heat strip is with it. One is I plan on installing a soft start going back and forth between the OEM Coleman and Softstart both seems good but leading towards...

Do have the tow hitch receiver wiring harness with a 7-pole round trailer connector, part 118271 | I have a 2017 Chevrolet Traverse LT thats tow package ready. Do have the tow hitch receiver wiring harness with a 7-pole round...

My shop mechanic here at my excavation company will install. Please advise all parts needed. | We want to change our disc brakes on our 2018 Raptor 355 TS Toy hauler to electric over hydraulic brakes. What do you suggest for...

If you already have a 4-way connector skip this part. The second harness you will need is the Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires item # ETBC7....

We tow with 2017 Ford Platinum F350 Super Duty that has towing package and 5th wheel package. Please advise all parts needed. | We want to change our electric drum brakes on our 2018 Raptor 355TS Toy hauler to disc brakes electric...