Result:

Good morning. I noticed yesterday that the rear end cap, rear tire holder and bike tire strap are all missing from my Inno bike roof rack that was installed on my 2013 Toyota Highlander at the time of purchase. The rubber is all super faded...

Hi I’m looking at purchasing a new Ford Ranger - and would like to outfit it with a locking tonneau cover with low/mid height towers and cross bars across the bed and tonneau cover. Here’s the tricky part we have two step through e-bikes weighing...

What are the differences between the following boxes: Inno Shadow 15 Rooftop Cargo Box - 11 cu ft - Carbon Fiber Black - INBRA1170CA, and the Inno Wedge 660 Rooftop Cargo Box - 11 cu ft - Gloss Black - INBRM660BK. Aside from slight dimensional...

I have a 2017 Toyota Highlander with a Thule hulavator kayak system and need new feet for my square cross bars. Can I purchase the feet from etrailer? I have cross bars but I need the associated podium feet with all the necessary parts. Can...

Inno Truck Bed Cargo Rack - Standard Beds - Mid-Size Trucks Part Number: INRT101-65 Before I purchase, I would like to make sure that the above part number comes with the c -clamp mounts and the cross bars. Also, can you recommend a thru axle...

Will this mount to the crossbars on the ADARAC truck bed rack? Looks like they use t-slots, but unclear if this rack will work. | Hello Randall, thanks for reaching out. Yes, the Inno Fork Lock Roof Bike Rack # INXA391 can indeed be used with...

I have a thule roof rack on my truck with square bars. I need to replace the bars too much corrosion and I need a set up to hold 2 canoes approximately 75. Any suggestions? | The older style of Thule square bars are no longer made but I do have...

I got from you the Malone AirFlow2 Roof Rack - Aero Crossbars - Raised, Factory Side Rails - Aluminum - 50inch Long Product looks great. But when I put on it my Tule SKI rack it makes a lot of noise while driving. If there is SKI inside it is...

I have a Yakima LocknLoad B platform and I am looking for a roof box to work with this system. I was wondering is I can I mount the InnoBox 2020 and use the T-slot mounting hardware? Or is it possible to mount the Yakima SkyBox 12? Thanks. |...

Can you guys help me with fitment of this basket on Rhino Rack Reconn bars? I believe that that there is a way to mount this with the c channels on a Reconn bar. Very similar to the mesh basket and BP4 connectors from the Australia. Can you...

please provide all dimensions of bracket and plate it sits on. | I went out to our warehouse to take a few measurements on both the clamp and mounting plate for the Inno Velo Gripper Bike Rack # INRT201. The black plate measures 4 inches long...

Id like to be able to put three kayaks on my 2008 toyota highlander. Do you have any suggestions? I dont have far to go with them as we live in a town with 7 lakes and I can take all back roads. | I envy your choice of lakes for your kayaking,...

Hi, Are there any recommended ways to secure the rack components, once installed, against theft? Thanks | If you wanted to use the Inno Velo Gripper Bike Rack # INRT201 and then lock the bike to the truck your best option would be a cable...

Hi, Im looking for a roof box recommendation for a 2006 Highlander. Ideally, Id love to find one that is under 7foot tall total to fit in most parking garages. The car, with factory rack I have, is 68.7inch tall. I know I can do the Yakima Skybox...

Hello, I have a few sets of Thule Square bars that I have used with several vehicles. I currently have a 2016 Toyota Highlander Limited Platinum with the flush rails and fixed mount points. I was wondering if this or any other products could...

I have a 2003 Ford Ranger and I really want to purchase your inno truck bed rail bike mounting system. I do not have utili-tracks or any of that stuff, just a plain truck bed with plain sides. I would like to know which model I would need...

What is the height off the cross bars? | The Inno Box 2020 Rooftop Cargo Box # IN86FR is not a set of crossbars, however if you're asking what size crossbars this cargo box will fit; it will fit on square, elliptical/factory, & round crossbars...

Will these crossbars fit my 2018 LE Plus? | The Inno Square Crossbars # INB127 referenced in your question will work great on your 2018 Toyota Highlander LE Plus as long as it has a naked roof (no existing side rails or crossbars). To complete...

Will this kit make a difference in how long it take to remove the Inno Roof Deck Platform Rack for Crossbars compared to the included clamps? | The Aero Crossbar T-Slot Mounting Hardware Kit part # INBRP12 will give your Inno Roof Deck Platform...

Hi - I have a 2016 Toyota Highlander XLE with chrome roof rails. The rails have a couple panels that I believe cover mounting locations for cross bars. Im looking for a rack system that would enable me to carry skis this winter. What can you...

Hi I’m trying to figure out what the maximum width apart my roof cross bars can be for this rack to work. | The maximum width your crossbars can be is 34 inches apart in order to use the Inno Tire Hold II Roof Bike Rack # INA389. This will...

Hi, I have a 2016 Toyota Highlander XLE. It looks like I need the INXB 138-145 crossbar + the INXS350 feet. I assume I need the INTR 153 kit - is this correct? - Thanks | Yes, you are correct. As long as your 2016 Toyota Highlander XLE has...

Hello Looking for a bike rack to install on the Yakima Rack n Roll trailer 78. Have 4 e-bikes. Weight per bike is 46-49#. Thanks. | Those are some heavy bikes. There is only one bike rack that fits your needs. It is the Inno Tire Hold II...

Hi Will a Yakima rack fit on my vehicle? I plan to use it to transport my road bike. | The Yakima Boa roof mounted bike carrier, # Y02065, can be used on the roof of your 2008 Toyota Highlander as long as you have a set of aftermarket round...