Result: rv levels

Hey Jimmy! I would be happy to help you get setup to flat tow your 2024 Chevy Silverado 1500 Trail Boss. You will need a tow bar, base plate kit, safety cables, wiring, and a supplemental braking system. I recommend the following: -Roadmaster…

The middle and rear jack mounting brackets of the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System w Touchpad and Remote - 6-Point Set #LC675817 that you referenced are a total of 6 inches in width. That's how much free room…

I reached out to Lippert to confirm that you can change out your 24-1/2" rear jacks that come with the 4-Point Lippert Ground Control 3.0 #LC358590 with the Short Left Rear Leg #LC342610 and Short Right Rear Leg #LC428493. They confirmed that…

Hello Norman, thanks for reaching out. Also thanks for providing the loaded hitch weight, since that is key in selecting the correct weight distribution system. That said, what I recommend is the following: - Equal-i-zer Weight Distribution System w/…

Hey Richard. The EcoHitch Hidden Front Hitch item #EH79CR will definitely support a 542 lbs motorcycle. It has a 1,000 lbs total capacity no matter how you use it. Unless you have the lightest motorcycle carrier ever, it's not going to work with…

Hey, Kendra. Thanks for your question. Yes, there is an adapter that you would need to be able to connect the Roadmaster Falcon 2 Tow Bar #RM-520 to the etrailer Invisible Base Plate #e98965. The adapter needed is part #e98983. The way these adapters…

Hey Ray, The etrailer baseplates #e98965 do not work directly with that Roadmaster Nighthawk. However, there is an adapter we have available for them to work seamlessly. You will want to pair that baseplate with the Roadmaster adapter #e98984. That…

Hey Logan, welcome back! Sorry to hear about your cover, hopefully everything else is fine. We got hit pretty hard with those storms here as well. The good news is we do have a replacement cover. What you need is the Replacement RV Air Conditioner…

Thanks for reaching out, Chad! The kit that you referenced, #F2220, is only compatible with a 3500 - Cab and Chassis so wouldn't work for your 2500 - Pickup. The kit that would work is part #F2071. This will work on 2WD and 4WD trucks. Something…

Hey Ken! Instead of worrying about fitment and a potential return I can give you some measurements so you can figure it out before ordering. The standard shank on the B&W Continuum Weight Distribution System #BW28FR is 11-3/8" from the…

We do have trailer levels that do not require drilling into your camper, but the Camco AccuLevel Trailer Bubble Level #CAM25563 does require drilling to mount it. Since you (understandably) do not want to drill a hole in your camper I recommend the…

Hey Scott, the correct Reese Goose Box for a Lippert 1116 pin box is the part #RP94716-61301 which does happen to also fit the 1716 since like you noticed they are very close in design and bolt pattern. Not a lot of people know their pin box model so…