Result: pulse width modulation

I am interested in not only the correct harness for my 2013 Golf TDI but also if you have any installation videos or instruction specific to my vehicle, showing removal of panels or what it takes to get to the tail lights on my car. I see one...

I read a review from a purchaser who stated that if you have a truck newer than a 2020, the system will not work. Is this true? Thanks, | Newer model trucks have been switching over to a Pulse Width Modulation system that essentially helps...

Hello, Is this what i need to be able to tow a small trailer? Whats the difference between this and C59496? BTW, I installed the C11188 Trailer Hitch. It works great and fits my car perfectly! | I'm glad to hear that you're happy with...

Can I connect a Prodigy P1 brake controller to a 2006 VW Jettas brake switch? I have it connected by a long wire to the post-converter brake light now but that causes intermittent braking when the turn signal is on. It also causes erratic...

I am having some serious trouble finding the right device to wire up my VW tail lights for towing a small trailer. The wiring on the lights is as follows: - Brake/ Tail lightOn the same wire -Turn Signal -Ground How do I wire up trailer...

ok here is a head scratcher, my 08 c350 w non led bulbs uses a single filament bulb for the tail and brake light. seems like it sends a low voltage to light it up gently for a tail light.... then a higher voltage to make the same bulb brighten...

I cant tell if the c300 has a 3 wire or a PWM-ST type. It has a black/white for turn signal a black/red wire for inner stop/tail lamp and a pink for stop/tail/park lamp. Not sure where to connect the Red and Brown wires from the converter....

Ive installed a hitch on my 2026 RAV4 and am trying to determine which 4-way wiring harness to use. CURT lists part C56496, Uhaul 56524 and eTrailer C59236. Im totally confused about which one to use. Do you have a install video on a 26 RAV...

i installed curt 56200 in a 2012 audi Q5. none of the lights work! I have verified power and ground at the module as well as ground of the lights. I even connected a new trailer light kit....i measured voltage at the curt output wires and...

Hi folks, I need electric brake controller for 2005 Mercedes ML500. It does not have the factory towing package. I successfully wired in a Curt 4-pole kit that I ordered from you last year. I now need a larger trailer and all of them have...

Ive tried the Tekonsha Prodigy RF 90250 controller that plugs into 12v receptacle in the car, but it fails to pair with the mounted brake unit on the trailer tongue... only with my hybrid Lexus. Itll pair with a friends Tundra, no problem. The...

Im only getting 9.5 volts on the back of my travel trailer where my wifi camera goes. My trailer is pulled by a 2000 chevy silverado. Will the 12volt filter capacitor solve my problem? | The 12V PWM Filter for RV Backup Camera Systems - Hardwire...

I am trying to find the brake switch wire to be able to hook up the Tekonsha P2 to my 2013 Passat TDi. The one I thought it was black and red is part of the brake system, but is hot without applying the brake peddle. It has pulse modulated...

Do you have a kit that makes it possible to hook up a trailer brake controller to a 2011 touareg with no wire bundle under the dash? | Since you indicated that you do not have a wiring bundle under the dash then you most likely do not have a...