Result: antenna

Hi Craig! The Replacement Shroud for Dometic Brisk RV Air Conditioner - Polar White #DMC27BQ is not the correct replacement shroud for you Brisk II air conditioner. Instead, you should use Replacement RV Air Conditioner Cover for Dometic Brisk Air II…

I was able to find out from Dometic, who took over Atwood's water heater division and the Replacement Control Panel #AT91367 you were looking at will be the correct part.

Hey Cory, the Curt 7k axle you have would use the grease seal #GS-2125DL. Did you damage your seal or are you wanting to have a spare on hand? The races you would need are part #25520 and #14276.

Hello Marc, thanks for reaching out. The Intelli-Power converter/ charger Model PD9260C can only charge lead acid batteries, it will not work with lithium. That said, we do have a suitable replacement for this that is lithium compatible. For that I…

Hey Steven, thanks for reaching out. We should have a stereo option for you, but there isn't a way to look up your camper to know exactly which stereo it was equipped with from the factory. Basically, we'll just want to be sure the new unit…

I have a replacement axle option for you, but based on the information I was able to find on your AL-KO 4400lb Axle #402268 it uses an older style of braking assembly that was discontinued when AL-KO was bought out by Dexter. If the brakes on your…

I would agree that is a lot of money for a battery box to carry two Group 27 batteries. For something more affordable we have the NOCO part #329-HM408, and the part #329-HM484 which are a little bigger than needed but would still work great.

The only tank equipped RV water heat option we currently offer is the Dometic RV Water Heater part #DMC74FR which is a 120 volt unit with 6 gallon tank and gas/electric operation. In regards to installation, this must be performed by a qualified…

It appears that all you going to need is the Replacement Lippert 4-Point Leveling System Control Brain Wiring Harness #LC178278. This wiring harness will allow you to plug your new Replacement Lippert Leveling Control Brain for 4-Point Leveling…

Hey Joe, yes the parts you mentioned are correct for what you need. The correct control module/brain would be the part #LC53ED and the replacement control panel would be the part #LC175225. Did yours get damaged or did it stop working one day?

Yes it will; Lippert has verified the correct replacement for your 175226/12656 control brain is indeed the following: - Replacement Lippert Leveling Control Brain for 4-Point Leveling System #LC53ED

Hello Lee, thanks for reaching out. If air won't go in at all it could be a bad/clogged valve. You could also have a major leak somewhere. Have you tried a soap test to see if there are any leaks?