Result: 30 amp plug

I have a 2019 Honda Ridgeline with a factory installed tow package 7 prong plug and it has a 20 amp fuse in the fuse box. I bought a Curt Echo controller that requires a 30 amp fuse. Will this controller operate on the 20 amp fuse? If not what...

Is there a quick connection plug/adapter available for this vehicle? If not is there a model that offers one which is still a portional brake controller? | With your Ford Ranger being so new there isn't a confirmed fit adapter however I do...

Which 2019 Ranger fuse feeds the always hot pin of the 7 pin trailer socket? | I looked up the online owners manual for a 2019 Ford Ranger. This shows the fuse for the trailer module is in spot 73 and it will be a 30 amp fuse. These newer...

I recently bought a 2020 Honda Ridgeline with a tow package and am looking to install a break controller. Several forums have suggested that the initial install and connection of a break controller will short out the associated fuse. Is this...

will I be able to use this adapter on a ford ranger fx4 level 2, 2006 part no.3035-S | You will only find the brake controller ports on the full size trucks. You will have to hard-wire the brake controller in a Ranger. The brake controller will...

Do I need to use the 30 amp circuit breaker to install the redarc liberty in my 2022 Ford Ranger xlt. Also when reviewing installation videos they show all 4 wires from under the dash connected with butt connectors to the harness that plugs...

Where would I put the 9510 to protect my system? I would be pulling an old restored 69foot Forester camper and using the new 7 pin system. Also I will need to put a fuse system and diistibution box in my camper. We need to be on the road in...

I have a 2012 Honda Ridgeline that we bought the Reese T-connector kit for. Just curious we found where the relay block goes thanks to prior question but still not sure if we need the pink 30 amp fuse included in the kit? Or if that was for...

I’m installing a Curt echo wireless brake controller on my ford ranger. I do not have a 12 vol power wire currently connected to my 7 pain truck re eptacle. The trailer brakes on on a 10 gauge wire T terminating at the trailer 7 point plug. Question:...

Help! I bought the P3 Break Controller, and the 4 flat/7 pin plug with the long gray cable, the three circuit breakers, etc. I bought it before Xmas and then becam ill and couldnt install the product. Your videos seem to have changed and...

Rented a popup camper for my 2020 RTL-E today while we wait for the one we bought to be built. Installed Curt Echo no problems. Blinkers etc worked fine. I noticed though coming home whenever I applied the brakes nothing happened on the app...

Do you guys have any idea if this would be a good upgrade in place of the older Magnetek 6620 power converter? | That ones a bit overpowered Chance! I recommend the WFCO Auto Detect RV Converter and AC/DC Distribution Panel item # WF96FR. This...

I am planning to purchase a seven plug conversion and brake controller. but I have this issue with the current factory 4 pin plug I have a 2004 ford ranger. I have power for running lights. but the turn signals and brake light wire connectors...

I purchased a Curt Echo for my 2021 Ford ranger and when I set it up the app cant find the TBC. It looks like when its plugged into the 7 pin that it isnt getting power. I tried putting the truck in tow/haul mode thinking that might send power...

I already have a Tekosha 118778 installed on my 2019 Honda Ridgeline. Thanks for a very wonderful product! When I installed it on my truck, I strictly followed the provided installation instruction manual by ing two 7.5 Amp and one 20 Amp Fuses...

Which models are compatible with a Ford vulcan 3.0l v6 found in the 2008 Ranger? Thank you! | For your 2008 Ford Ranger with a 3.0 liter V6 we have the Kat's block heater part # KH11409 which is a confirmed fit. It installs in the plug on...

Can you give me some guidance on how to install the 4-flat wiring harness 118778 in my 2019 honda ridgeline? it's a little diffrent than what ive seen. | The installation of the T-One Vehicle Wiring Harness with 4-Flat Trailer Connector # 118778...

Please help me, I need a brake controller and hopefully a wiring adapter for a 1998 Ford Ranger 4.0 liter engine, 4x4 Xlt ext cab truck, I am pulling a 17ft camper weighing 2750 dry weight. I am almost sure it has the towing package,...

1996 ford ranger xlt 4x4. can i just run the hot black wire from the plug to the hot side of battery with a fuse holder, instead of a 40 amp breaker. | You can use an in line fuse instead of a circuit breaker for the hot lead on a 7-Way. However,...

As part of one of your answers to one of the questions, you sent a picture picture D indicating that it is a connector, but since I am not familiar with proper names of electrical parts and accessories, I just need to know if the connector that...

Hello, I got this info from a previous question on a 2018 Ridgeline. The Fuse Box Type B under the hood has fuse locations related to tow package wiring in position 3 TRL E-BRAKE 20 amp, position 6 TRL HAZARD 7.5 amps, position 7 TRL BACKUP...

I have a 2013 Honda Ridgeline Sport. Im using Kit Number 118491. None of the photos in the instructions are for the Ridgeline so I can only reference/follow the text-based instructions. Issue #1 The instructions say to insert two relays...

Why do I not have power on pin 1 have this paired with the curt wireless controller and no power on it either. Have even hooked trailer up put in drive still no power | You will want to check the fuse for your trailer charge circuit. As your...

Can not get it to work. Fuses check ok, power at the inside connector trucks side. Nothing commuting out of the block. | Thank you for your purchase of Curt 4-Pole Wiring Harness # C56365 which is a confirmed fit for the 2017 Honda Ridgeline. If...