Result:

I have a 2009 Ford Ranger XL with prior install of baseplate kit 477-5 but the removable arms are missing. Can you provide such? Arm parts are labeled as C001314 and C001315 in 477-5 installation instructions. | We sure can Don. It is the Roadmaster...

Is this the correct seat cover for my 2009 RangerXP500EFI???? | Hey Duane, yes the Classic Accessories Quick Fit UTV Bench Seat part # CA18026 is a confirmed fit for your 2009 Polaris XP500. |

Do you guys have any idea if this would be a good upgrade in place of the older Magnetek 6620 power converter? | That ones a bit overpowered Chance! I recommend the WFCO Auto Detect RV Converter and AC/DC Distribution Panel item # WF96FR. This...

Will this cover fit a 2009 Ranger Crew? Front and back seats? | Hello Colleen, thanks for reaching out. The Classic Accessories UTV Quick-Fit Seat Covers # CA181420 are for the 2009-2021 Polaris Ranger crew 800 and crew 900. So as long as this...

Hi, I have a 2009 Ford Ranger XLT 4x4 it has a 4 pin trailer plug now I need a brake controller and wiring . I tow a two axle trailer What do you suggest? | For the upgrade from a 4-way trailer connection to a 7-way with brake controller, I...

I get 12+ volts when I use the manual control. But the max I get from the blue wire directly behind the controller is 4 volts no matter what I change the boost to or crank up the power too. Do you think the controller is bad? Or what could be...

I have 2009 Ford Ranger Sport with classic platinum cover the bed is approx 6foot long will this fit my frame it snaps on 3 sides and slides in front rail I must have lost original part number | If you can provide the serial number from the...

I have a single cab 2007 Ford Ranger. Do you have a DIY permanent roof rack for this truck? If so how much is it and can you email me a picture of it?? Thanks, | For your 2007 Ford Ranger there are a couple options. If you have a regular...

ican fnd the right wires to conect my pop nd lock pl8200 on 2009 ford ranger | The wiring harness you will need to access to install the Pop & Lock Custom Tailgate Lock part # PAL8200 on your 2009 Ford Ranger will be under the passenger's side...

Im not clear on wiring between the coach and the towed, the center pin on my coach connector is activated, if course, by the reverse lights. Pin 4 at the 1 oclock has my factory 12v power source. On the Roadmaster towbar 7 to 6 kit connector,...

T connector for 2009 Ford Ranger Do you make one? | We do have a T-Connector for your 2009 Ford Ranger. You will want the Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # HM40655. It will install behind the...

Hello, I have a slide out that measures 167 and 3/8 inches flange to flange. Would you recommend a 173inch slide topper? | Either will be a good fit, it comes down to personal choice of how much overhang would you like and if there is the...

NEUTRAL TOW SWITCH IS NOT AVAILABLE THAT I CAN SEE, WHAT ARE MY OPTIONS FOR TOWING? SURELY SOMEONE OUT THERE CONTINUED MAKING A DEVICE OR KIT THAT ALLOWS FLAT TOWING. | The neutral tow kit you're looking for was a Ford product that would've...

Will this work with a Super Winch X3 1307? | The Superwinch X3 Series Winches use a rather uncommon mounting pattern of two holes spaced 3.69" apart. Therefore, you'll likely haver to drill through the mounting plate in order to secure it. You...

What is the wiring diagram for 4 flat to 4 round? I want to change plug to match the hopkins endurance wiring harness HM47043 on towed vehicle. Thanks | On a flat 4-way connector, the standard function is Green is the right turn signal and...

I need a plug in trailer wiring for my truck its a 4 way. I would like a plug in plug type not the four way prong but a plug that mounts to my truck with a flip up cap. Its a 2009 ford ranger. I have wires coming down but their deteriorating....

I have a 2009 Ford Ranger Sport 6 cylinder four door pickup. I tow a small 16ft travel trailer. I traveled the US this summer with little problems. I was told at one park there is a suspension kit that I could get to be able to tow more trailer....

I had TFRR050A installed on my 2009 Ford ranger 2wd stock and there is over 2” before it touches the axel. What spacers would I need to close the gap to 1/2” | To get a total of 1-1/2 inch of spacer for your Timbren kit part # TFRR050A you'd...

What do I need for non led light | The Pacer Performance 3rd Brake Light Logic Module # PP20-702 you referenced is for a single LED light. It isolates the brake signal from the turn signal on combined wires. It works in the same way as the...

We had a 2009 4 door Ford Ranger Super Cab standard transmission and we put westin 3inch SS nerb running board. We traded in for a 2009 2-door Ford Range super cab automatic transmission. Our 4-dr those little doors opened up. The new 2009...

Has anybody successfully used this on a Ford truck? I have a 2009 Ranger. Thanks! | Yes, you can use the Curt Echo Brake Controller # C51180 on your 2009 Ford Ranger. Brake controllers are universal but we have it in a fit guide because for...

What is the part number for 6 foot rails? | The correct TracRac SR Sliding Ladder Rack that fits a 2009 Ford Ranger with a 6 foot bed is the part # TH43001XT-600 which means the correct base rails are # TH21600. |

Good morning, I am going to buy a tonnaeu cover for my 09 ranger . Its between the TruXsport role up cover and this one . Looking at the two they look pretty much the same , until you get to the price. Is this cover any better construction...

Hi there. Do you offer a 4 flat flat trailer harness I connect to my tail lights? | There are universal hardwire options for a 4-flat wiring harness that connects to your tail lights. I'm not sure if you were asking for the vehicle side or...