Where to Install the Kats Engine Block Heater on a 2012 Hyundai Genesis 3.8L V6
Were on the engine block is the hole for the kats block heater? | The Kat's Heaters Custom Fit Engine Block Heater part # KH11812 for your 2012 Hyundai Genesis 3.8L V6 will install on the right hand (Passengers) side of the engine in the rear...
Recommended Yakima Roof Rack for My 2010 Hyundai Genesis Coupe
Hi there etrailer team! Hope all is well. I’m looking to purchase a roof rack system for my 2010 Hyundai Genesis Coupe 2.0T. The best body of knowledge I’ve found on the matter is here on etrailer, but I’m still unsure of what the best system...
Why Choose a Powered Taillight Converter Over a Non-Powered Model
What dictates the need between using a powered Tail light convertor Vs a non powered? | There's a couple of factors that determine that. On older vehicles, very few vehicles needed a powered converter, because the vehicle's electrical system...
Correct Engine Block Heater Location for 2011 Hyundai Genesis with 3.8L V6 Engine
I also have been told by my installer that the exhaust manifold would have to be removed and that the cord would burn on the manifold. Do you have any pictures of the 3.8 heater location? | I checked with the manufacturer, Kat's, about the Kat's...
Which Kat's Block Heater Fits 2025 Mitsubishi Outlander SE 2.5 Liter
Will this heater work, without modification, on my 2025 Mitsubishi Outlander SE? Please confirm the location for this vehicle as well. | Hey James, yes the Kat's Heater part # KH11812 that you referenced is a confirmed fit for your 2025 Mitsubishi...
Trunk Bike Rack for 2015 Hyundai Genesis Sedan
I have a 2015 Hyundai Genesis sedan. Several bike shops say there are no racks available for my car. I am curious if you have one that will work. | Hello Sandra, I'm assuming you are looking for a trunk mounted bike rack for your 2015 Hyundai...
Crossbar Kit Recommendation to Fit with Retrax XR Tonneau Cover on a 2022 Ford Raptor
Hi I have a truck 2022 Ford Raptor with retrax XR tonneau cover with rails compatible with T-slot accessories. Can you please recommend cross bars that would work with the rails on the retrax xr tonneau cover? Thank you | Hey Bora, thanks...
Trailer Hitch and Wiring for 2009 Mercedes R320 Diesel
I have a 2009 mb R320 diesel w251 . The information on the web site indicates the class 2 trailer hitch and separate wiring packages are for a r350 MB the wiring package is with brake controller and 7 way. Can to clarify the correct products...
Diagram of the Portion of the Fascia that Needs Trimmed to Install Curt Hitch # C13103
do you have a sketch of how much to trim do you cut around hitch support bar ? | I attached a copy of the installation instructions for the Curt hitch # C13103 which is confirmed your 2007 Mercedes R350. The installation instructions have...
Should Radial or Bias Tires be Used for a 3500lb GVWR Pop Up Camper Trailer
Vehicle - 2011 Coleman Sun Valley pop up camper. Fully loaded - 3500lbs I cant seem to figure out which tire to get. It seems there is much debate on trailer tires, whether to get radials or bias ply. My stock tires are Kenda ST185/80D13-D and...
Trailer Hitch & Towing Set Up For 2013 Hyundai Genesis Sedan
I am looking at your page and it appears that you sell a hitch for a 2013 Genesis 3.8L Sedan. I have not been able to find a rating for what this car is able to tow. Can you tell me where your information came from? I would like to tow a...
Is Cutiing Required for Installation of the Mercedes-Benz R350 Trailer Hitch # C13103
I would like to know if there is any cutting of the oem bumper required in order to fit your trailer hitches? | You will not need to cut the OEM bumper for installation of the Curt Trailer Hitch, item # C13103, for the 2008 R350 by Mercedes-Benz....
Trailer Hitch for a 2012 Mercedes R350 BlueTec
Will this hitch also fit the Mercedes 2012 R350 Blue Tech diesel model? Also, where is the best place to get the hitch installed once I buy it? I doubt that a dealer would do the work but I am afraid to trust non-Mercedes technicians, especially...
Removal of Fascia on Mercedes 2008 R350 When Installing a Curt Trailer Hitch, Part # C13103
Once I get the facia off, I can install the hitch. Any tips? Ive removed the 4 bolts under the rear bumper. How do I get the rest of the facia off? CURT 13103 model hitch. | I spoke with my contact at Curt and he informed me that the underbody...
Trailer Hitch and Wiring for a 2015 Hyundai Genesis Sedan with All Wheel Drive
will this work for 2015 genesis sedan AWD? If not please let me know why. | We recently spoke with Curt and found that hitch # C12086 is indeed a fit for all wheel drive models of the 2015 Hyundai Genesis sedan. If you plan on doing any towing...
Recommended RV TV with USB Slot and DVD Player
looking for a camper tv that has a DVD slot as well as able to play movies from a USB drive. Have a old Jensen and connected USB with movie on it to usb port and does not display the movie | The Jensen # JTV1917DVDC has exactly what you're looking...
Trailer Hitch Recommendation for 2009 Hyundai Genesis Sedan
I need either a class 3 or 4 hitch or a motorcycle carrier to fit a class 2 hitch for a 2009 Hyundai genesis To carry a 230lb dirt bike | The Class III and IV trailer hitches are designed for higher capacity, larger vehicles like SUVs and...
Trailer Hitch and 4-Way Wiring Recommendation for 2018 Mitsubishi Eclipse Cross
I need a hitch and 4 wire harness for a 2018 mitsubishi eclipse cross | For your 2018 Mitsubishi Eclipse Cross we have the Curt hitch # C13273 which is a confirmed fit and then for 4-way wiring you'd want the part # C56296 and you'd be set. |
Recommended Trailer Hitch For 2015 Hyundai Genesis Sedan
I really need this hitch to work, will it? | If your 2015 Hyundai Genesis is a sedan, then the Curt Trailer Hitch, part # C12086 will work great for you. Per a note from Curt, all non-trailer loads - bike racks, cargo carriers and so forth...
Will the Thule Pulse XL Roof Cargo Box Fit on the Factory Crossbars on a 2011 Mercedes R350
Hi, I am planning to purchase the Mercedes Benz Basic Roof Rackinch for my 2011 R350. I would like a roof cargo carrier that will work with the Mercedes Benz rack. Will this box fit on the MB Basic Roof Rack?inch The MB Roof Rack has a channel...
Availability of Hitch for 2006 Mercedes R500
Does this fit a 2006 Mercedes R500? | We offer two different Class III hitches that are a fit for your 2006 M/B R500. Both the Curt # C13103 and the Draw-Tite # 75470 offer a 3500 lb towing/ 350 lb tongue weight capacity, but the warranty requirements...
How to Determine Which Replacement Axle is Needed for 1979 Avion Travel Trailer
I HAVE A 1979 AVION TRAVEL TRALER WITH 4 SEPERATE AXELS. THE SPINDEL IS BENT ON THE RIGHT FRONT AXEL, THEREFOR WEARING MY TIRE DOWN WITHIN 3,000 MILES. DO YOU HAVE ANY IDEA WERE I MIGHT PURCHASE AN AXEL? THANK YOU | In order to determine which...
Ground Clearance of Curt Hitch Installed on 2008 Mercedes Benz R320 CDI
Is the car just too low for a hitch? | For your 2008 Mercedes Benz R320 CDI we have the Curt hitch part # C13103 as a confirmed fit. This will fit your vehicle will and will not sit too low at all. When we installed this hitch on a similar 2006...
Can a 4-Bike Platform Bike Rack be Used on a 1-1/4 Inch Trailer Hitch on a 2011 Mercedes R350
I have a 2011 Mercedes R350 with a 1-1/4 inch hitch. the label on the OEM hitch states that the car has a 280 pound tongue weight. Can I use the Yakima holdup 2 rack with 1-1/4 inch hitch and add to it the Yakima holdup +2 2 bike add on? ...
Filter Your Search
Contact and Help