Recommended Tire Chains for a 2023 Rivian RS1 275/50 R22
Hello, I’m looking for low profile 16mm or smaller snow chains/cables for my 2023 Rivian RS1 275/50 R22. Would these work? Thanks! | Hey Julie, thanks for the information and the picture! I checked with Rivian and we've only got one set of tire...
Will Trailer Hitch for 2012 Chrysler 300 Fit SRT8
I see you have trailer hitches for a 2012 Chrysler 300. Do they also fit the SRT8 version of the 300? | Hey Jim, welcome back! The Curt hitches fit the 300C and 300S. The Draw-Tite Max-Frame Trailer Hitch Receiver # 76145 is confirmed to fit...
Where Do You Measure From On The Trailers Coupler to Install The Pole-Tongue Adapter # EQ95-01-5950?
For the tongue pole adaptor, you mention in the video that it need to be install between 27 to 32 inches from the reveiver in the tongue. Do we mesure from the tip of the receiver or the middle, because if I mesure from the tip of the receiver...
How to Determine Which Ball Mount Will Have Enough Rise for Curt Hitch on a 2005 Chrysler 300c
So I am considering the curt class III hitch #13465 for my 2005 Chrysler 300c. I have seen a previously answered question suggesting the #d-26 ball mount would be recommended to clear the rear bumper. I notice that the D-26 has a lift of 3/4...
Trailer Wiring Harness For A 2018 Chrysler 300S
Im looking at ordering this wiring harness for a 2018 chrysler 300s but there are 2 different wiring harnesses listed for my vehicle which one should I buy and whats the difference | Hi Jamie! For your 2018 Chrysler 300S, I recommend the Curt...
Would Thule Hullavator Work With Rivian R1S OEM Roof Rack?
Im trying to install the Thule Hullavator on a Rivian R1S. I already have the Rivian Cargo Crossbars so Id prefer to use these if possible. The Hullavator requires the crossbars to overhang and the Rivian Crossbars dont. Is there a way to stackinch...
How to Tell if Power Mountain Tallboy Off-Road Bottle Jack Will Work with a 2023 Rivian R1S
what jack can you recommend for changing tires on my Rivian R1S 2023 and Intech Sol Dusk Rover off road package travel trailer? Will the Tallboy pm34fr work with a Rivian puck? | Hey Darin, thanks for reaching out! The Power Mountain Tallboy...
Will etrailer Spare Carrier # e98ZR Work with Rivian R1S 20
Does this fit a rivian r1s 20 inch all terrain tire? 275 / 65 / R20 | Hey John, yes the etrailer spare tire mount part # e98ZR that you referenced will work with the wheel and tire Rivian R1S 20 inch all terrain tire that you referenced. |
Will The Curt Trailer Hitch Receiver # C13236 Fit A 2019 Chrysler 300
Is the c13236 hitch fit my 2019 chrysler 300 6cyl with dual exhaust | Hey Ken, Yes, the Curt Trailer Hitch Receiver # C13236 is listed as a fit for all models of the 2019 Chrysler 300 so it would be a fit. If you plan on towing a trailer or...
3 Bike Platform Bike Rack Recommendation for 2007 Chrysler 300
I am looking for a hitch mount platform bike rack that can hold three bikes. I have a 2007 Chrysler 300. Can you recommend a product for my needs? Thanks! | For a 3-bike platform rack the Kuat Transfer part # KU24FR would be a great option....
Measuring for Trailer Hitch Receiver Ground Clearance on a 2013 Chrysler 300
I am looking at either the Drawtite 76145 or Curt C13093 receiver for my 2013 Chrysler 300. It appears that the receiver clearance from the ground is more on the Drawtite than the Curt. I couldnt find any specific dimensions from the frame...
Replacement Jack For 2001 Stratos Bass Boat Trailer
I have a 2001 Stratos Bass boat with a Fulton center bolt swivel jack onto a welded plate on the trailer. I would like to upgrade to the Fulton F2. My holes on the plate are 3X3 on center. Will the F2 work? Can I send you picture? Thank You...
Does The GE Appliances RV Refrigerator GE58FR Come With A Mounting Bracket?
Does this with mounting brackets? | Hello Raymond, thanks for reaching out. The mounting brackets are not included with the GE Appliances RV Refrigerator # GE58FR. It requires a GE approved top bracket part BMT-GPV10. This is not something we...
Installation Instructions for Wiring a 2008 Volkswagen Rabbit to Tow a Trailer
My question is about the electical hook-up. Can I splice a 4-flat connector directly into the wiring harness, or do I need some kind of powered module dure to the fact that it6 haqs LED lights? | Due to the MX (Multi-Plexed) wiring system on...
Why is a Stabilizing Strap Recommended on Curt Hitches and what is Meant by Non-Trailer Load
What is meant by stabilizing straps for non-trailer loads? | Non-trailer loads are hitch accessories like bike racks and cargo carriers. Basically anything that is not a trailer that you could put on a hitch. Curt recommends you use a Curt Trailer...
What is the Battery Life for Hopkins Wireless Magnetic Tow Lights
What is range of battery life for these lights? The check battery level indicator light every 2 hours statement has me concerned. I drive for much longer stretches than that and dont wish to carry excessive spare AAs or replace them every couple...
Recommended Roof Rack for a 2013 Chrysler 300
Hi! I have a 2013 Chrysler 300 with no rails or crossbars. Also no sunroof of any kind. It is a naked roof : I was wondering which roof rail system works best for this vehicle and which accessories would allow to carry two kayaks. Thank...
Correct Trailer Hitch for a 2013 Chrysler 300S
What trailer hitch fits my 2013 Chrysler 300s | The trailer hitch options for 2013 Chrysler 300 are all compatible with the S models. I recommend going with the larger 2" opening due to the higher capacity and abundance of hitched mounted accessories...
Towing Capacity of 2006 Chrysler 300 V6
I got a Chrysler 300 Limited with a 3.5 liter v6 I was wondering how much weight you think I can tow. Thanks | From what I was able to find on your 2006 Chrysler 300 V6 it looks like can tow up to 1,000 lbs. To tow you'll need a hitch like...
Is Trimming of the Foam Absorber Required for the Curt Hitch On a 2010 Mini Cooper Convertible
have a question about hitch and hard form . I removed the bumper today for preparation for hitch installation. The bumper has the hard foam but it is wedge between the front and back metal bumper with a full metal back hard foam cannot be...
What is Tongue Weight Capacity of Draw Tite Hitch 76145
I was wondering if the draw tight Max frame trailer hitch would support a 400 lb power wheelchair on the rear of a 2014 Chrysler 300. | The Draw Tite hitch part # 76145 that you referenced which fits your 2014 Chrysler 300 does have a 675 lb...
Why is Weight Capacity of Trailer Hitch Receiver Confirmed to Fit Greater Than Vehicle Tow Rating
I purchased a class III trailer hitch model C13093 which is custom built to fit my 2016 Chrysler 300. The hitch is rated for 3500 lb load. However I now learn my vehicle is only rated for 1000 lb capacity. Was planning to pull a cargo trailer...
Trailer Hitch is Rated Higher than Towing Capacity of 2005 Chrysler 300 with 2.7L V6
I own a 2005 Chrysler 300 with the 2.7L V6 engine. The only specs I could find says it has a max towing capacity of 1,000 pounds, but this hitch says it holds up to 3,500 pounds. Even the larger engine 300s only say their capacity is 2,000...
Ball Mount Recommendation for 2013 Chrysler 300 with Curt Class III Trailer Hitch
I am purchasing the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2inch for my Chrysler 300 and curious if i need a specific hitch mount for a Chrysler 300 other than of course the 2inch one so it fits the receiver. As it only shows...
Filter Your Search
Contact and Help