bing tracking image

!Excursion  x   >   RVR  x   >   Rabbit  x   >   FX35  x   >  

Availability of Bike Rack for 85 lb E-Bikes

Im looking for an ebike rack to carry 2 ebikes. 85Ibs each. One of the bikes has a very long wheel base 54. I couldnt see what the maximum wheelbase was in the details section just that it was adjustable for the racks I looked at. Can you tell...

Why Choose a Powered Taillight Converter Over a Non-Powered Model

What dictates the need between using a powered Tail light convertor Vs a non powered? | There's a couple of factors that determine that. On older vehicles, very few vehicles needed a powered converter, because the vehicle's electrical system...

Which Kat's Block Heater Fits 2025 Mitsubishi Outlander SE 2.5 Liter

Will this heater work, without modification, on my 2025 Mitsubishi Outlander SE? Please confirm the location for this vehicle as well. | Hey James, yes the Kat's Heater part # KH11812 that you referenced is a confirmed fit for your 2025 Mitsubishi...

Best Trailer Wiring Harness for a 2007 Infiniti FX35

Is C56190 harness compatable with led taillight on my Infiniti tow vehicle. | Yes, the Curt Powered Tail Light Converter part # C56190 will work with LED tailights. Please note that your 2007 Infiniti FX35 could have came with either a separate...

Recommended Wiring Harness Confirmed to Fit a 2006 Infinity FX35

which trailer wiring kit fits 2006 infinity fx35 | For your 2006 Infinity FX35, we have the Tekonsha ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit # 119250KIT. This is a confirmed fit that...

Replacement Jack For 2001 Stratos Bass Boat Trailer

I have a 2001 Stratos Bass boat with a Fulton center bolt swivel jack onto a welded plate on the trailer. I would like to upgrade to the Fulton F2. My holes on the plate are 3X3 on center. Will the F2 work? Can I send you picture? Thank You...

Does The GE Appliances RV Refrigerator GE58FR Come With A Mounting Bracket?

Does this with mounting brackets? | Hello Raymond, thanks for reaching out. The mounting brackets are not included with the GE Appliances RV Refrigerator # GE58FR. It requires a GE approved top bracket part BMT-GPV10. This is not something we...

Installation Instructions for Wiring a 2008 Volkswagen Rabbit to Tow a Trailer

My question is about the electical hook-up. Can I splice a 4-flat connector directly into the wiring harness, or do I need some kind of powered module dure to the fact that it6 haqs LED lights? | Due to the MX (Multi-Plexed) wiring system on...

What is the Battery Life for Hopkins Wireless Magnetic Tow Lights

What is range of battery life for these lights? The check battery level indicator light every 2 hours statement has me concerned. I drive for much longer stretches than that and dont wish to carry excessive spare AAs or replace them every couple...

Why is a Stabilizing Strap Recommended on Curt Hitches and what is Meant by Non-Trailer Load

What is meant by stabilizing straps for non-trailer loads? | Non-trailer loads are hitch accessories like bike racks and cargo carriers. Basically anything that is not a trailer that you could put on a hitch. Curt recommends you use a Curt Trailer...

How Visible is the Curt Class III Hitch # 13354 when installed on a 2010 Infiniti FX35

I own a 2010 FX35 and I am very interested in buying this product for my towing need. Before I do so, I would like to understand how visiable is this hitch when you install onto a FX35, is it invisiable or you can pretty much sees the hold thing...

Trailer Hitch and 4-Way Wiring Recommendation for 2018 Mitsubishi Eclipse Cross

I need a hitch and 4 wire harness for a 2018 mitsubishi eclipse cross | For your 2018 Mitsubishi Eclipse Cross we have the Curt hitch # C13273 which is a confirmed fit and then for 4-way wiring you'd want the part # C56296 and you'd be set. |

Installation of DrawTite # 75778 Class III Trailer Hitch on 2010 Infiniti FX35

Is removal of splash guards, underbody panels, and/or tow hook, or trimming of the passenger side underbody panel required with the DrawTite #75657 as are required with the Curt # 13554 hitch? Thank you. | To install the Draw-Tite Class III...

Trailer Wiring Recommendation for 2005 Infiniti FX35

I have a 2005 inphinity fx35 . I purchased your trailer receiver now I need the harness that goes with it. Is there a harness which doesn’t require wires splicing just plug in ? Thank you and please give me the correct product harness that I...

Where Does a Block Heater Install on a 2011 Infiniti FX35

Do you guys have a instruction manual on installation of this specific part block heater that? Is it a easy access or would a dealership have to do the install thank you much help is appreciated | On your 2011 Infiniti FX35 the Kat's heater...

Is Trimming of the Foam Absorber Required for the Curt Hitch On a 2010 Mini Cooper Convertible

have a question about hitch and hard form . I removed the bumper today for preparation for hitch installation. The bumper has the hard foam but it is wedge between the front and back metal bumper with a full metal back hard foam cannot be...

Aero Bar Rhino Rack Roof Rack that Fits 2009 Volkswagen Rabbit 5 Door Hatch

Hello, I am looking at RR56RR for my 2009 Volkswagen Rabbit 3 door. Your site says it will fit but when I use the part number RV0230B into rhino racks site it states its only for the 5 door car. Which is correct? I really want these for my...

Troubleshooting Rhino-Rack Roof Rack Installation on 2018 Mitsubishi RVR Flush Rails

Ive tried to install the kit of the SX031 legs on my 2018 RVR, but if you look at the pics those legs are not straight on the flush rails so when I have the bars on them then they dont fit anymore... Am I doing something wrong or I got the wrong...

Replacement Hardware Kit For Curt Hitch # 13554 On A 2009 Infiniti FX35

2009 Infiniti FX35 AWD Hi there! Could you tell me if the replacement hardware kit for the Curt 13554 includes the small bracket for the passenger side called the mount plate weldmentinch in the instructions? I have just the bare hitch with...

Trailer Hitch & Wiring Harness for 2008 Infiniti FX35

Hello guys, I dont see/find it on your product search....... do you guys not sell the part #90074hidden hitch for a 08 Infiniti FX35?! You guys show it on your YouTube channel but not on your website. Thanks for your time. | The Cequent Group...

Troubleshooting Turn and Brake Lights not Working with Running Lights on, 2009 Volkswagen Rabbit

I have the same problem than the VW GTI guy. After I have wired the kit according to the 2-wire method into my 2009 Rabbit, turn and stop light are working as long as the running light is not on. I have tried also the different 3-wire methods...

How to Prevent Exhaust Components from Contacting the Trailer Hitch

I purchased the replacement CURT trailer hitch hardware from eTrailer for this hitch and installed the 11074 on my 2009 4DR Rabbit. However - after install, I now experience a lot more noise at low RPMs. Theres vibration being transmitted back...

Recommended Trailer Receiver Hitch For 2004 Infiniti FX35

I just bought an ebike, and need to add a trailer hitch to my 2004 Infiniti FX-35 so I can add a Thule bike rack. Will this work, and who canI get to install it? Thank you, | Adding a trailer hitch to your 2004 Infiniti FX35 to accommodate...

Trunk Mount 2-Bike Rack Recommendation for a 2006 Infiniti FX35

Is there a 2 bike trunk carrier that will fit 2006 infiniti fx35 ? Does Saris bones have one that fit ? Or Thule? Are there other options? | We do have 2-bike trunk mount bike racks that fit your 2006 Infiniti FX35 but none of them are from...

Filter Your Search