1998  x   >   1964  x   >   1999  x   >   SuperSprings Intl  x   >  

I have a 2000 Fleetwood Bounder on a F-53 chassis. It is dragging bottom when I come out of a driveway. The rear springs may be sagging. Will the sumo helper springs bring the riding height back to factory clearance? Thank you | Hey Bryan, The...

which sumo springs fit 1999 F53 34ft Bounder Motor Home. MH is not and will not be over loaded. Thank You | For your 1999 F-53 chassis, there are 2 different SumoSprings help spring options, and the correct kit for your motor home will depend...

I am trying to find part numbers for Supersprings for my 1999 E-350 Cutaway/ambulance. I have a dually Dana70HD rear. SuperSprings International, Inc. SSF-106-47 for the front I am unsure for the rear. | SuperSprings does not have a fit for...

Will this super spring kit help with axle wrap? | No, they will not but I have something that does. The SuperSprings Custom Suspension Stabilizer and Sway Control Kit item # SSA13 does a great job of keeping your F-250's rear end from sagging...

Hi Folks, upon the recommendation of an installer I purchase a set of Timbren tdrtt3500 for my 99 Dodge 3500 truck with flatbed as the flatbed installer did not install it to the correct height. If I put 1 ton of materials on the flatbed it...

I have a 1999 Dodge ram 3500 8 ft bed with a BandW goose neck mounted under the bed. I need to know what air bags will fit for my truck. Thanks | I have a solution, but none of the air bags that fit your 1999 Dodge Ram 3500 are compatible with...

Will the SumoSprings # CSS-1145R help with the sag in the rear of my Ford Expedition. Im towing a 21ft skeeter and Im well within my towing capacity, but the boat causes the rear to sag and this makes it a little difficult on steering, just...

I was wondering if this product will fit on a 1999 ford expedition. | The coil SumoSprings # CSS-1145R are the ones that will fit your 1999 Ford Expedition. These springs will work with 4WD and 2WD. The springs # CSS-1168R you referenced are...

I am planning on towing less than 4,000lbs cross country and was interested in the Timbren front and rear suspension upgrades. TJFC01, and TJRC01 am I correct in the assumption that both are replacements for the stock bump stops ? The tow limits...

I have a 99 dodge ram 2500 4x4 cummins diesel and want to get the new coil springs for the front, there is two options of coil springs one says 2600 lb and the other says 5000lb. I pull a gooseneck trailer regularly loaded down. Both springs...

Will this kit work if I have a DrawTite Hide a Goose turnover gooseneck ball installed? | If your 1998 Dodge Ram is a 2500, or 3500 (cab and chassis models only for the 3500), you can use Firestone Ride-Rite Air Helper Springs, # F2220, because...

Wondering if this would be the best fit for my taco. Largest load Ive carried thus far in bed is my atv. It is an extended bed. Thanks | The Super Springs Custom Suspension Stabilizer and Sway-Control Kit you referenced, part # SSA7, is a...

Im wanting to install a set of your # F2550 on my 1999 Ford 1 Ton F-350 DRW which tows a 40 ft fifth wheel toy hauler using the following Curt products. Item # C60720 gooseneck hitch, Item # C16210 base plate adapter and Curt Q20 Item # C16130. My...

TGMRCK15S TGMRCK25S whats the difference between TGMRCK15S and TGMRCK25S.I see this two items can fit 1999 Chevrolet Silverado.which one should i order? And if I want fornt Front Axle Suspension Enhancement,Which one should I buy? | The Timbren...

Have a late 99 F250 long bed diesel, 6spd, 4WD, SRW super cab with a single factory overload and air lift bags sitting inboard of spring packs. Hauls an Arctic Fox 860 that can make the truck sway. Can super springs be used in conjunction with...

I have a 1998 Jeep Wrangler TJ with the 4 cylinder. I would like to use a small snowsport plow with a winch on the front, however my Jeep reaches the bottom of the suspension travel very quickly with weight on the front. My suspension is...

I have a customer that has a 1998 E350 Class C motorhome and needs rear suspension help. I see you list up to a 250 light duty then go to an F53. Will these fit the E350 chassis ? | I can help find rear suspension help for the 1998 E350 Class...

the truck rear suspension is needs help truck is lower in back than it is in front and also will not take much weight without bottoming out ,what is best product for me | We have suspension enhancement products that are confirmed to fit your...

I have a1999 Itasca 30foot class a with as Ford F53 chassis About 20,000 maxed out Ive installed the Roadmaster sway bars front and back and the steering stabilizer which really help suitability but the ride is still extremely rough.. Would...

I have a 99 f250 super duty Ford 4x4 power stroke and I was wondering how long is the sumo spring in the Blue version for the front axle? How long is it from the top plate where it bolts up to the bottom of the pad, so I can measure the distance...

Will the installation of these springs require longer shocks? Or are stock length shocks sufficient? | The Super Springs SuperCoils are designed for use with stock suspension components only. They would not be compatible with longer shocks....

I am looking to add the sumo spring rebel. Will this work with the installed BandW turnover ball? What part # do you suggest | For Your 1999 F-250/F-350 I recommend the SumoSprings Rebel Custom Helper Springs Item # SSR-101-47-2. The instructions...

Hi, Im trying to find the best helper spring option for my 1999 Ford F350 with a 4 lift. I have been considering different styles. Can you tell me which work better on a lifted truck? It is lifted by using lift blocks. Thanks! | First, we need...

looking for sumo springs for 99 f53 fleetwood southwind weight is 18k need front and rear what models do u recommend, thx | I checked with SuperSprings and they only offer a front kit for a 1999 Fleetwood Southwind with 18K GVWR on Ford F-53...