Rear Suspension Enhancement Recommendation For 1996 GMC K2500 With Truck Camper
I have a 1996 gmc 2500 4x4 extended cab with a heavy 10’ overhead camper these helpers would have to be down tight under pressure all the time Pressure. Will They lift the back of truck up apx 1 1/2” to 2”. Also will i louse travel making...
Replacement Door Lock for Six Pac Camper
hello there - i am looking for a lock/latch to replace the one on my sixpac 6foot mini combo cab-over camper its from the mid-1990s. i have attached a photo or two. the door has hinges on the left side, can this item - Global Link RV Entry Door...
Parts Suggestions for Flat Towing 1996 Geo Tracker
What parts will I need for flat-towing a 1996 Geo Tracker 2 door? I already have a demco commander II towbar that I used on my 2004 GMC Envoy. Will that towbar work on my Geo? We already have a patriot braking system , too. Thanks | A tow bar...
Availability of Trailer Hitch for 1996 Ford Taurus With Dual Exhaust
1996 taurus duel exhaust need trailer hitch | According to Curt Manufacturing, their # C12232 Class II hitch fits all models of the 1996 Ford Taurus, including the SHO and wagon. As long as your exhaust system is in the stock position, the hitch...
Would Trailer Hitch for 2001 Mazda B3000 Truck Also Fit 1996 Model
Would a 2001 mazada tow hitch assemply fit my mazda 1996 B3000 | The hitches we carry for the 1996 Mazda B3000 like the Curt # 13138 fit models from 1994 to 2010 so yes a hitch from a 2001 would also fit a 1996 model. |
Height of Mounting Brackets of Conventional Ramp Door Spring for 8' Wide Enclosed Trailer M394FR
I am looking at ramp door spring #M394FR for my enclosed snowmobile trailer. It currently doesnt have a roller spring and I would like to add one. I see the measurement says its 4 3/4 but what I need to know is what size is the mounting bracket...
Front Mount Trailer Hitch for Using Plow on 1998 Chevy Silverado 4x4
I have a Meyers plow I am wanting to install this front hitch mount on my 98 Chevy Silverado reg cab 4x4. And Fab my plow to just slide into the receiver. Do u see a reason not too | Adding a front mount hitch like the Curt # 31042 to your...
Help Identifying Puck System In A Used Truck
Hi, I just bought a truck with some sort of hitch in the bed. It is missing the part you put into the bed to couple to a trailer. I was hoping I could send a photo and you could help identify what it is? Thank you | Hey Cameron, that looks an...
Installation Video for TorkLift Custom Frame-Mounted Camper Tie-Downs 1998 Dodge Ram 3500
I have a 1998 Dodge Ram 3500 dually, factory hitch, no running boards. Do you have a installation video for part # d2100? | We have a product review video for the TorkLift Custom Frame-Mounted Camper Tie-Downs, # TLD2100 but not an installation...
What is the Replacement Tarp for My Extang Tuff Tonno Cover on My 1998 Dodge Dakota 6 1/2' Bed
Do you have a 1998 Dodge Dakota R/T 6.5ft bed extang tuff tonno replacement cover ?part# | The replacement Extang Tuff Tonno cover for your 1998 Dodge Dakota 6 1/2' bed will be the Replacement Tarp for Extang Tuff Tonno Roll-up Soft Tonneau...
Recommended Storage Cover for a 2008 Fleetwood Pop Up Camper
what cover do i need for my pop up i live in colorado and need it to store for the winter and it sets outside and live at 9000 foot elevation what would a recommended cove be thanks jim. | Can you please measure the width of your camper for...
Does Buyers Products Hitch Plate Fit 1996 Ford F-350 Cab and Chassis
WILL THIS HITCH PLATE FIT 1996 FORD F-350 ?? WHERE CAN I MOUNT EXISTING TAIL LIGHTS ? ALSO LOOKING FOR A SIMPLE WIRE KIT FOR SAME TRUCK | The Buyers Products Hitch Plate with Receiver Tube - Ford # 3371809060A will indeed fit a 1996 Ford F-350...
What is the Coiled and Straightened Length of the Blue Ox Coiled Electrical Cord # BX8861
hello, what is the expanded length and the retracted length? of this coiled wire #BX8861. thank you. | I went out to the warehouse and pulled a Blue Ox 4-Wire, Coiled Electrical Cord with 4-Way, Round Plugs, # BX8861, to take some measurements...
Replacement 1/2 Inch by 1-1/2 Inch Bolt for Reese Dual Cam Bracket
Im going nuts trying to find the 1/2inch X 1 1/2inch bolts for the Frame Brackets for the Reese Dual Cam Control. You offer the Rivet Nuts separately, you offer the Frame Brackets separately......but darned if can find the bolts for both of...
Trailer Hitch Receiver Fit For 1998 Jeep TJ
Will a 13900 hitch fit a jeep tj 98? | There is a 2 inch hitch that fits your 1998 Jeep TJ, but the # C13900 does not fit; instead, you can use the following: - etrailer Trailer Hitch Receiver # e43AR Then to add a 4-way, the correct fit is...
Recommended Trailer Brake Controller And Wiring Needed To Install On a 1996 Chevrolet Silverado 1500
Will it work on my 96 Chevy Silverado 1500 | The Pigtail Harness # 7894 will allow you to wire in your Draw-Tite Activator brake controller on your 1996 Chevrolet Silverado 1500. You will need a Universal Installation Kit for Trailer Brake Controller...
Replacement Motor for Kwikee Series 32 Steps on 1996 Coachmen
I have a 1996 spartan chassis Coachmen Destiny that has a kwikee step set. it has 2 steps I have attatched a photo of the tag on the steps. it gives a serial number and says it is a series 32 . The motor has a plastic gear in it that is...
Can Bullet Door Latch 37210785 Install on Doors that Open Left and Right
Just want to make sure this can mount right or left door openings? Mine opens on the right going into the camper. Thanks! | Hey Chris, yes the Bullet Door Latch for RV Screen Door # 37210785 can install on doors that open to the left or to the...
Bearing Protector Grease Cap Installation on a Boat Trailer with EZ-Lube Spindles and Disc Brakes
I am converting to disc brakes. My spindles currently have zurk fittings in the end of them. The new Titan disc brake package comes with the Kodiak bearing protectors, do I remove the zurk fitting in the end of the spindle when using the bearing...
What Does Weight Capacity Of Trailer Leaf Spring Mean?
I see weight numbers for leaf springs, 1500 pounds each, 2000 pounds each, etc. What exactly does that mean? Does it mean the spring deflects a certain distance with that much weight, or does it mean that it totally flattens out, removing...
Will the Curt 7-Way and 4-Way Trailer Connector # C57100 Fit on a 1996 Dodge Dakota
I have a 1996 dodge dakota truck with a factory installed 7 wire rv style trailer connector.will this unit adapt to my vehicle without cutting and splicing wires? I am looking for something that simply plugs into wiring harness. | Yes, the Curt...
How Much Does Westin Trailblazer Rear Bumper # 42-3005 Weigh
How much does this bumper weigh? | I spoke with my contact at Westin and they told me the Westin Trailblazer Rear Bumper, part # 42-3005 weighs 50 lbs. This features 2 inch steel tubing and has a 2 inch by 2 inch receiver opening. You will...
O2 Sensor Fittings on MagnaFlow # MF23881 Catalytic Converter for 1998 Toyota Corolla
Does this have fittings for O2 sensor? | Per MagnaFlow, their # MF13881 catalytic converter for the 1998 Toyota Corolla does indeed have the port for an O2 sensor. This converter is considered 49-state legal, which means that is does NOT meet...
Does the Curt Clamp-On 2 Bike Rack Need Additional Stabilizing Straps
Does the rack need to be fastened or strapped to prevent it swaying back and forth as you drive | The Curt Clamp-On 3 Bike Rack, part # C18013 does not require any additional straps for stabilization while carrying bikes. If you would like...
Filter Your Search
Contact and Help