Hub and Drum Assemblies and Spindles for Dexter Electric Trailer Brakes 23-112
I need a drum assembly and spindle for this Dexter #23-112. 3500 lbs. Let me know and the part # as well Thanks you | The brake assembly # 23-112 is rated for 6,000 pound axles, not 3,500 pound axles. For a 3,500 pound axle you will need to...
Lockable Tonneau Cover Recommendation for a 1998 Toyota Tacoma with a 6 foot bed
does any of your tonneau covers lockable? | Check out the Access Tonneau Cover # 834532000432. This cover uses a single latch with a slide lock that will prevent the cover from being opened without the tailgate first being opened. So if you...
What Wires Are Used To Install Pop & Lock Custom Tailgate Lock On 1998 Dodge Dakota
How do i find the wires? The video provided on YouTube is nothing like my truck. | The wires you need to install the Pop & Lock Custom Tailgate Lock, part # PAL8100 can be found behind the driver side kick panel on yoru 1998 Dakota. They will...
Installation Of Pop & Lock Manual Lock For 1998 Ford Ranger Tailgate
How does this unit install? Does it fit and lock under my tailgate handle? Do I have to dis-assemble my tailgate handle to install it? Let me know exactly how it installs. Thank you Pop & Lock for 1998 Ford Ranger w/ steel handle - | Pop & Lock...
Do Bearings Need to be Removed to Install New Grease Seal on Hub
a grease seal just blew out on my new ez lube axle. to replace it, do I need to take all the bearings out? or, can i just take the hub off and put in a new seal from the back of the hub? Thanks | The bearings for your trailer hub don't need...
Blow-Up of Diagrams In Pop & Lock PAL2300 Instructions for 1998 Ford Ranger Tailgate Lock Install
I have 1998 Ford Ranger metal handle. I purchased PAL2300 trying to install but diagram to small please help me | The # PAL2300 is indeed the correct locking replacement tailgate handle for your Ranger. I have provided a blow up of the diagrams...
Upgrading From 7K to 8K Electric Brake Assemblies on Trailer for Increased Braking Power
I have a trailer with dexter 7k axles. They use the 12x2 brake shoe and drum. Ive never been happy with stopping power when Im more than half loaded. The dexter 8k axle comes with 12x 3 3/8 inch drums and shoes. Is it possible to replace...
Bearing Protector Grease Cap Installation on a Boat Trailer with EZ-Lube Spindles and Disc Brakes
I am converting to disc brakes. My spindles currently have zurk fittings in the end of them. The new Titan disc brake package comes with the Kodiak bearing protectors, do I remove the zurk fitting in the end of the spindle when using the bearing...
Availability of 6K Idler Hub with 2.125 ID Grease Seals
Trailer Idler Hub Assembly for 6,000-lb Axles - 6 on 5-1/2 - Pre-Greased Item # AKIHUB-655-6-K. Can I get 2 of these with the 2 1/8 inch ID grease seal.? Reply and I will contact customer for approval. THX | We don't offer the # AKIHUB-655-6-K...
Equalizer Bushing Size and Compatibility
I have a 1976 Terry Travel Trailer with tandem axles that I am updating/replacing the suspension on. The old shackles were slotted. I ordered the MORryde Suspension Upgrade Kit MR46ZR to replace them since the kit comes with bronze instead of...
What Can I Do to Fit the L-Bracket into the Housing of My Pop & Lock Handle on My 1998 Mazda B2500?
I have an 1998 Mazda B2500 which I bought used. My truck does not have the plastic tailgate handle. This one is steel, so I am now starting to think that it was replaced. But, in any case, the Pop and Lock bracket is not sliding onto the...
Is Pop & Lock Custom Tailgate Lock for 1998 Toyota Tacoma Keyed Alike
Is it possible to order multiple locks that are identical so they may be opened with the same key? | The manual Pop & Lock Custom Tailgate Lock # PAL5100 is only available with unique keys and from what I'm seeing there aren't any options that...
Trailer Hub Grease Cap for Hub with 1.980 inch Opening
looking to buy ?E-Z Lube Grease Caps. not sure if you have the right size? I measured the grease cap on my trailer I get 1.980. | You would want the EZ Lube Drive in Plug with Cap part # RG04-040. This has been confirmed as a fit for trailer...
What Brands of Bearings are Available
is ?TruRyde the only brand of bearings you sell? what is the warranty on them? | TruRyde and Redline are the two brands of bearings that we carry. According to my contact at TruRyde they come with a limited 3 year warranty. |
Outer Diameter of Replacement Trailer Hub Bearing LM4854
Could you please give me the correct OD of the bearing LM48548? | The Replacement Trailer Hub Bearing part # LM48548 has an outer diameter of 2.56". |
Will Pop and Lock Tailgate Lock PAL2300 Fit a 1998 Ford Ranger with a Metal Tailgate Handle
1998 Ford Ranger XLT side step Will this work with the side step bed tail gate metal handle ? | Yes, we confirmed with Pop and Lock that the part # PAL2300 will fit your 1998 Ford Ranger with a metal handle so this would fit and work well....
Where to Measure on Trailer Spindles to Determine Replacement Hubs
Can you tell me where I should take the measurements on the spindle to determine what hubs I need.It is a 3500lb trailer axle. I want to replace the 2 hubs. The inner bearing is L68149 and the outer is LM12749. These bearings are from a brake...
Dimensions Of Dexter Hub Assembly For 8 to 12 Inch Wheels
We are interested to buy your 8 inch hub assembly, we need to know more details, do you have some CAD Drawing, or detailed measurement. such as the hub length and shaft requirement. thanks | The Dexter Hub Assembly, part # 34822545BX is designed...
Filter Your Search
Contact and Help