Search: 10 Inch Drums   >   !Longview  x   >   Bearing Buddy  x   >  

the flange. The OEM drums appear to be 10x2-1/2 vs. 10x2-1/4. Will I need to replace the drums with 10 x2 1/4 | Looking to upgrade to electric brakes with...

On part number AKHD-545-35-K can I use the 1980 bearing buddy with that, and with that drum what | On part number AKHD-545-35-K can I use the 1980 bearing buddy with that, and with that drum what part number can I use for the...

The 21-36 oil cap, # RG04-270, fits 9K (after 10/1989) and 10K GD (2 piece drum), and 10K to 15K | Will this cap fit the Dexter 6000 lb. axle? Dust cover is 2.44 | The 21-36...

with boat is around 3500lbs. The old drum brake measures a little over 10inch diameter on the outside and I | I have a old Trailrite boat trailer that I want to replace the drum brakes and...

wheels, 5 bolt x 4-1/2inch ridged / HD-1000 hub drum. 3500 lb. or 3750 lb. axle ?? I need to replace | I have pre 2000 EZ load trailer w/ 2x 3inch ped Dexter axle, 1-3/8inch tapered spindles, 14inch wheels,...

. Trailer weighs 5200 dry and a max of 7300. Wheel size is 15 in, drum size is 10 inch x 2 1/4. I see | I need help determining which set of brakes to choose for my 2001 Fleetwood Prowler Travel...

I looking to replace the self adjusting Brakes and back plate assy, the drums and wheel bearing | I looking to replace the self adjusting Brakes and back plate assy, the drums and wheel bearing plus the bearing buddy. 2004 Trail...

hub/drum as part # 8-407-5UC3-EZ. If the armature surface of the drum where the brake magnet rides on your | I have 2017 Forest River Rockwood 2902WS trailer with Dexter 4.4k Axles and not sure what bearing,...

The Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 5 - Pre-Greased # AKHD | What quick grease cap fits this AKHD-550-35-K | The Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter...

" Diameter. The bearing kit L44649 is common to dexter brake drum and this spindle, but 1.25inch spindle | Ive got a sailboat trailer equipped with hydraulic actuator for a 2000 lbs axle, 1-1/16inch spindles...

i have al-ko 10inch x 2 1/4inch drum electric brake axles. the inner bearing is al-ko part | i have al-ko 10inch x 2 1/4inch drum electric brake axles. the inner bearing is...

I recently purchased etrailer Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10inch | I recently purchased etrailer Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10inch...

recommend # AKEBRK-35-SA Left and Right Side Brake Kit. This kit will include 2-10 inch diameter brake | I want to add electric drum brakes to my homemade boat trailer... I know what I need to do with the...

For Trailer Hub and Drum Assembly - 3,500-lb E-Z Lube Axles - 10" Diameter - 5 on 4-1/2 Item # AKHD | i a,m looking to order the correct bearing buddies for the following drums that i am also ordering from E-Trailer:...

From my research the Rockwood likely has a 3,500 pound axle and therefore uses 10 inch brakes | hi - I need to replace the trailer brakes on my 2000 Rockwood Premier 2317g popup camper. Do you know what size...

We've got the parts you're looking for! You will need to swap the hubs for a hub and drum | Im trying to determine which parts I need to purchase in order to add electric brakes to our Fleetwood popup trailer. According to...

Hello, I just found out my trailer drums are mismatched, when I tried to install bearing buddy. One | Hello, I just found out my trailer drums are mismatched, when I tried to install bearing buddy. One side fits the 1.98 fine,...

The Trailer Hub and Drum Assembly part # AKHD-545-35-K can indeed be used with bearing buddies | I purchase two hubs for my trailer, item AKHD-545-35-K, and have installed two sets of 1.98” bearing buddies. Both sets have come...

, I'd recommend the Kodiak 10 inch hub/rotor kit, part # K2HR35D. If you wanted to install brakes | Looking to convert my boat drum brakes to disk. I dont have lugs on the trailer, I have bolts that attach the...

of the drums but were a tad small on the 4th drum. Im measuring 2.033inch ID. Which cap would that be | I had ordered some RG04-040 Grease Caps, 1.99inch for my trailer. They fit perfectly...

Hello, Looking for a galvanized hub kit for my 40 year old boat trailer. The spindle is 1inch , 8 | Hello, Looking for a galvanized hub kit for my 40 year old boat trailer. The spindle is 1inch , 8 inch wheels - 5-4.5. I do...

the HydraStar Electric Over Hydraulic Actuator for Drum Brakes - 1,000 psi # HBA-10. For the brake line kit | Do you sell a Kit for 7000 lbs Axles to convert from Electric brakes to Electric over Hydraulic...

Hi, What type of bearing buddy is recommended for the drum/hub AKHD-545-35-G-K? I see from | Hi, What type of bearing buddy is recommended for the drum/hub AKHD-545-35-G-K? I see from the details it states that the diameter...

direction to a complete hub and drum assembly? I also measured the axle itself and it is 2 3/8 diameter | I have idler hubs on my trailer now and want to convert to electric brakes. I removed the hubs ,5x5 1/2, and measured...