Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
You definitely want all of the hardware installed for hitch #C13272 or any hitch because how it attaches is part of how it gets its rating. It sounds like the problem you are having is a factory weld nut that is packed with grime and corrosion.…
view full answer...In order to both carry bikes and flat-tow a vehicle at the same time, you'd need to use an adapter on the motorhomes hitch, I recommend the Roadmaster Dual Hitch Receiver Adapter like part #RM-077-2 as it's designed for this exact purpose. In…
view full answer...The correct replacement threaded hitch pin for the Yakima BuckHorn 4 Bike Rack is the Replacement Hitch Bolt and Clip for Yakima HoldUp and BigHorn Bike Carriers part #Y8890200.
view full answer...Thank you for that info and we do have a replacement for the Titan hub 17214. That hub is for 2,500 lb axles, uses inner bearing LM67048 and outer bearing LM11949; the correct replacement for that is the following: - Dexter Trailer Idler Hub Assembly…
view full answer...I can confirm that the bolt thread size on the Threaded Anti-Rattle Hitch Pin Lock for etrailer Cargo Carriers #e99047 is M16 x 2. This has a pin diameter of 5/8" with a 2-5/8" span. It is designed for etrailer cargo carriers that fit…
view full answer...You'll need to utilize the hitch bolt included with the rack, as it's the correct diameter and has the correct threaded portion length to be compatible with the threaded boss inside the bike rack shank. For the locking portion, use part…
view full answer...I went out to our warehouse and took some measurements for you. The #P313 Replacement Receiver Insert measures 1.31 in x 0.87 in while #P333 measures a bit smaller at 1.30 in x 0.75 in. See the attached images. #P313 is designed to replace the…
view full answer...You'd want to put the convex side of the washer against the bolt head of the hardware that comes with the Curt hitch #C13146 when installing it. That way the head pushes it flat as you tighten it which acts as a lock nut.
view full answer...The hitch pin bolt you'll need for a Thule bike carrier/rack is the Replacement Threaded Pin for Thule part #853-5917. It is indeed an M12x1.75 bolt which is roughly 4" long. I can't confirm compatibility of thread pitch for the…
view full answer...All Thule bike racks use the same threaded hitch pin so you can use the Replacement Threaded Pin for Thule Snug Tite Hitch Lock and Anti-Rattle Device #853-5917. This is just the threaded bolt, and you'll need to use the flat washer, lock washer…
view full answer...All Thule bike racks use the same hitch pin, so you will want the Replacement Threaded Pin for Thule Snug Tite Hitch Lock and Anti-Rattle Device #853-5917 or the complete pin and lock kit #THSTL2. This is the 12mm thread you mentioned.
view full answer...The long hook part #050050 is the correct part for your Sportrack bike rack but it does not come with the other parts mentioned and we do not carry them at this time. Are the old components from your rack possibly reusable?
view full answer...Related Searches
Filter Your Search
Contact and Help