Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
No worries, we are happy to help! Yes, the Curt Ball and Safety Chain Loop Kit #C60692 listed as a fit for your 2019 Ford F-250 replaced the C60609 so they are essentially the same and they both fit your F-250. Sometimes the changes made to kits…
view full answer...In regards to the Linxup GPS Tracking Device part #300-AT3, once you install the GPS device, you'll be ready to choose and set up the Linxup service plan that works for you. When you purchase a service plan, you can download the Linxup mobile…
view full answer...The Galeo Pro GPS Tracking Device #GA94FR will update the location when you press the "Locate" button in the app. Otherwise you will get push notifications when it detects movement so you know when your trailer is being moved around…
view full answer...The issue you are having with the gooseneck hitch ball getting stuck in the trailer hitch after sitting is pretty common, especially with the factory pop-in hitch balls that have the latch in the top like the Curt Ball and Safety Chain Loop Kit part…
view full answer...The OEM location for the gooseneck ball hole in the bed of your 2020 Ford F-350 will be 45-1/2 inches forward from the rear edge of the truck bed. There would be a flat spot in the bed where the ball will install as well. I attached a picture that…
view full answer...I spoke with my contact at Curt and they informed me that the case dimensions of the Curt Curt Ball and Safety Chain Loop Kit #C60692 are 16.5"x10.5"x5".
view full answer...All the brake controller needs to sense a trailer connection so that you can test it is a slight amperage draw on the output circuit. For that you can use a circuit tester like the part #PTW2993 with one pin grounded and the other on the output pin.…
view full answer...Yes, the Curt Battery #C52023 is the correct battery for your Curt breakaway kit.
view full answer...I am not entirely sure what process you took so I'll give you some other things to try, or maybe a different way to test the Prodigy P3 #90195. First, sever the blue wire a couple inches from the back of your controller. Then use a circuit tester…
view full answer...It is not recommended to bypass the break-away battery and a very small current is normal. The 7-pin connector sounds like it is not connected correctly. It is not uncommon for the trailer brake controller pin at the 5 o'clock position to be…
view full answer...What type of brakes do you have, drum/disc, electric/hydraulic? The best course of action for you is going to entail removing the drum/caliper and taking a look at the brake shoes/pads. If they were smoking then chances are the shoes/pads need to be…
view full answer...The #168233 Double Lip Grease Seal has an outside diameter of 2.332 inches and an inside diameter of 1.688 inches. This seal is not compatible with a AF2527E seal with a O.D 2.312, because, even though the O.D. id very close, the inner diameter of…
view full answer...Filter Your Search