Search: Anchor Points   >   !Roof Basket   >   Performance Tool  x   >  

The Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box #GY38FR is not going to allow for any additional turning clearance than the 5th wheel king pin with a fixed point hitch. We have offset gooseneck ball options depending on what type of…

No, it does not but I have one that does. It is the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box item #GY86GR. This pin box is custom designed for the Lippert Rhino bolt pattern. It has an identical 21,000 lbs towing capacity and a 3,500 lbs…

We have the following Gen-Y shock absorbing 5th wheel pin boxes which are compatible with the Lippert Rhino pin box bolt pattern. The weights listed below are the maximum capacities the pin box is capable of supporting. 21,000 lbs - 3.5K TW #GY86GR…

There are only two Tow-Rax Tie-Down Anchors, the Tie-Down Anchor for Tow-Rax L-Tracks part #TWSPSSTD which is designed to be used with Tow-Rax L-Tracks like part #TWSP6DTAB and the Tow-Rax Tie-Down Anchor for Tow-Rax Low-Profile Floor Tracks part…

To allow for full articulation so you don't have to worry about the tires bottoming out int he wheel wells, I'd recommend going with a 15° down torsion axle. If the original axle was a 0°, this would raise the…

In order for you to realize more clearance under your trailer, using torsion axles with down degree angles will give you more clearance. On a system that has a 10 degree up axle, the center line of the spindle to the bottom of the trailer frame is…

The Roadmaster Sterling All Terrain Tow Bar part #RM-576 is just simply the newer, updated model of the discontinued Roadmaster Sterling Tow Bar part RM-555. It sounds like you might be looking for replacement parts for one or the other so if that is…

We haven't gotten any feedback on the Erickson Horizontal E-Track #E19148 that it causes wood rot. In general the water would drain between the boards or out the ends of the track pretty easily. These tracks wouldn't cause wood rot at a…

This question is refined by several decisions. What will you use for tie down points on the Corvette? What will you use for tie down points on the trailer? How easy do you want it to be. Finally, what looks good. If you are OK with climbing under…

The Underside Tie Down Point #RRS606 will fit into the tracks on the underside of a Rhino-Rack Pioneer Platform Rack like the #RR78AB. Regular tie-downs #RR43VT and eye bolts #RR46XP are also available for the top channels on the rack.

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

I have a solution for you. We do not carry hardware kits for the Demco Cast Head Coupler w/ Jack Hole - eZ-Latch - 2" Ball - A-Frame - Bolt-On - 10K #DM37ZR. However the instructions will give you the dimensions you will need and you can pick…