Workhorse  x   >   Cedar Creek  x   >  

Hi, I want to the Air Lift LoadLifter 5000 Ultimate to a 2002 Workhorse P42 step van that has been converted to a food truck. Will this system fit a P42? I could not find P42inch listed on your website. I have included a few photos to show...

Do you have a plug and play harness for my RV? 2004 8368MXG Gulf Stream Sun Voyager 8.1 Workhorse W22. I Have the Tekonsha Prodigy III Break controller. I just dont have the wire like I do in my Dodge Ram that is plug and play for my RV. If...

I have your Roadmaster Front Anti-Sway Bar and TruTrac Rod Kit Item # RM-1259-106 that I am installing in my 2004 Newmar MountainAire RV. When I position the B424 and B425 brackets and the 3/4inch bolts there is about 1/2inch between the frame...

I am in need of only one rear wheel cover 22.5 x 81/4 . The original left us in the Smokey mountains | We do offer wheel covers like the # NA226H40N you were looking at in your desired size of 22.5" x 8.25", but they currently only come in a...

I am looking to replace a damaged Valley Industries V5 5000# hitch on a 2006 Itasca Suncruiser 38Tfoot on a Workhorse 24 chassis. The existing hitch receiver is approximately 40inch overall width, and approximately 36inch centered on mounting...

Will the rm-rsscp30 fit my 1996 Winnebago brave? The one on there now looks just like this just minus the spring. Thanks for your time! | The steering stabilizer that you need is Roadmaster Reflex Steering Stabilizer with Mounting Brackets for...

have 2004 holiday rambler traveler on workhorse chasis. need brake controller for cargo trailer. what does the plug under dash look like to plug in brake controller, if it has one? can i use your tekonsha prodigy p3 and do you have cable to...

Roadmaster Anti-Sway Bars for the 0 W-Series by Workhorse Is this item a 1259-118 or a 1259-108? Thanks | The two sway bars you referenced are designed to fit different versions of the W-Series Workhorse motorhomes. The part # RM-1259-108...

Will this unit fit a 2008 Fleetwood Bounder on a 2007 workhorse W22 chassis? I am having trouble with this MH wandering while driving down the highway. What is the cost of this unit and what are the correct order numbers for the complete unit,...

I am about to install my Airlift 1000s in my 2004 Workhorse P32 chassis. Would a set of the 1000 HDs fit, and would there be any noticeable difference between the 1000s and the 1000 HDs? | The difference would be capacity and you would notice...

2004 workhorse chassis w 22. Looking for a front mount receiver hitch. What options do you have? | For your 2004 Workhorse W22 chassis there isn't a specific custom front mounted hitch receiver. Because of that, I recommend using the Adjustable...

What is wire size? AWG? | I reached out to Mighty Cord and found that on the Mighty Cord Replacement Hardwire RV Power Cord part # A10-5036ENDBK there are 4 wires. The red, black and white are all 6 gauge wires while the green is an 8 gauge wire. |

Hello I have a 2005 Workhorse Chassis P42 and in desperate need to find something to stop it from swaying from side to side when driving. Ive changed the shocks but it still rocks. I have contacted several places and had no luck. I was told...

LOOKING FOR A FRONT MOUNT RECIEVER/HITCH 2 FOR A 2005 W22 WORKHORSE CHASSIS MONACO MONARCH-SE 34SBD. WOULD LIKE TO MOUNT A SPARE TIRE CARRIER TO SAME 22.5inch WHEEL PLUS TIRE... HELP, THANKS | We don't have any front hitches that would work...

Disappointed to see roadmaster front trac bar for my 2003 w22 is made in China. Do you offer a product made in USA? | The Roadmaster TruTrac Front-Axle Trac Rod for Large Trucks and RVs # RM-TRACW-22 is manufactured in-house at Roadmaster's...

I own a 2006 national dolphin 5355 on the W22 workhorse. Currently my rv has serious sway issues even though the original owner installed: Safety Plus anti sway Safety plus shocks Davis tru-trac Steer safe anti sway It all is at least 10 years...

I have a Chevy workhorse chassis W-22. What front anti sway bar will fit my unit. Witch steering stabilizer. Thank you | For your 2008 Workhorse W22 motorhome what you'd want for a front sway bar and steering stabilizer is the Roadmaster...

Im looking for a steering stabilizer for my 2004 Fleetwood Bounder class A 32W motor home. I cant get your web site to identify which of your listed Roadmaster or Blue Ox units will fit my unit. Can you help? Thanks, | Your 2004 Fleetwood Bounder...

Greetings: I own a 2005 Winnebago Adventurer 38J Class A motorhome with the Workhorse W24 chassis. I am contemplating the installation of front and rear anti-sway bars, and have a few questions: 1. What is the difference between these two...

hi we have a damon avanti motor home 31 ft long and its road handling is poor it sways about on rd - bad when a tracotor unit and trailer past wind or when wheels get stuck in truck ruts in road . what suspension solutions do you have . workhorse...

I am looking at the air lift springs. They seem to fit the w20 of 2002 but not the w20 of 2001, is this for real? I had always thought that these two were identical. This is for a workhorse chassis of course | I checked with Air Lift and they...

Was thinking about adding the sumo springs to the rear of my 2005 workhorse W22. Just wondering if they would make much of a difference since I have a rear sway bar already. | Yes, the SumoSprings Maxim kit part # SSR-280-54-1 would work great...

Hi, can you advise me correct model front and rear sway bars for a 2005 Fleetwood Bounder 34F built on a Workhorse W22 chassis? Many thanks, | Yes I can! For a front sway bar to fit your 2005 Fleetwood Bounder 34F built on a Workhorse W22...

I cant seem to find the appropriate size lug nuts that hold on the wheel covers and the cover for the lug nuts also. I have a Monaco Monarch 37foot gasser which rides on a 2005 Workhorse W22 chassis and the wheel size is 22.5. | I looked up...