Are Spacers Needed to Install Timbrens on Vehicle with Leveling Kit
For a 2004 F250- I am looking to purchase a set of timbrens part # TFR250SDE. My truck rear wheel well measures out at 44.5. In the video on your website the f250 measures out at 40.75. My truck has a leveling kit on it and I want to make...
Which Way Should the Kingpin Coupler Block Face on the Andersen Ultimate Part # AM3200
I have a Ford SD swb, should the block be facing forward or back?wards | The orientation of the kingpin coupler block that comes with the Andersen Ultimate Connection 5th Wheel Trailer Hitch System with Adapter part # AM3200 will depend on which...
Installation Details for Curt Q24 5th Wheel Trailer Hitch C16545-16020
I ordered a curt fifth wheel wit he slider to mount in the Ford F-250 with the factory under bed mount. Ive lost the instructions with the torques in it Thank you | I have attached the complete installation details for the Curt Q24 5th Wheel...
Measurements of Titan Zinc-Plated Straight-Tongue Coupler
How wide is the overall piece? I want to see if it will fit into 4 inch sq tube. | I went out to the warehouse to take some measurements of the Titan Zinc-Plated Straight-Tongue Coupler # T4853100 for you. Based on the measurements, the Titan...
Estimated Installation Time for Firestone Ride-Rite Air Helper Spring Kit F2550
Whats typical installation time for rear Ride-Rite airbag kit on 2002 Ford F250? | The Firestone Ride-Rite Air Helper Spring Kit # F2550 is a confirmed fit for the 2002 Ford F-250, both 2WD and 4WD versions. I linked an installation video showing...
Disc Brake Kit Needed for a 2015 Cyclone 4200 with Triple Dexter Axles
I have 6k Dexter axle s/n 131071645 dex#: 1852900, Dexter axle: 046718 i want complete kit for 7k axles with disc brakes please provide part numbers and price? Actuator is for a 2017 f350, 6.7 lariats dully 4.10 differential | I reached out...
Vent Cover Availability for Older Trailer
I cant find a ventline elixir vent cover with the same hing. It has gaps in it. not solid and the ones that have gaps are in a different place. It is on a 1989 chinook motor home that I am in the process of restoring. | Check out the picture...
Tire Options for Trailer Rim that is 8 inches In Diameter and Measures 4-1/2 inches Wide
I have a ditch witch trailer that caries a load of just under 1000 pounds. The rims are 8inch and 4.5inch width. What tire size are comparable with the 4.5inch width? I see that 5.7-8 use 3.75 and 16.5-6.5 use 5.375.... What other see tires...
Troubleshooting Trailer Brakes that Lock Up When Brakes are Touched
I have installed your 10inch electric brake kit with new drums. No matter how low the brake controller is set the brakes on the trailer lock up as soon as the truck pedal is pushed. I have installed trailer brakes many times and have never...
Comparison of Air Lift Air Helper Spring Kits Available for 2015 Ford F250 2WD
What is the difference between AL57396 and AL88395? I have a 2015 F250 2WD | There's two primary differences between the # AL57396 and the # AL88395. The AL88395 is AirLift's Ultimate Air Helper Spring, which uses integrated jounce bumpers....
Is Provider ST235/85R16 Radial Trailer Tire TTWPRG235R16 Made in China
Are the provider ST235.85=16 made in China? | Yes, along with the vast majority of vehicles tires, special trailer tires like # TTWPRG235R16 are often made in China or elsewhere offshore. These tires are produced on the same type of manufacturing...
How Much Clearance Should be Between Tires and Fenders on Unloaded Trailer
first off thankyou for all the great help and products I have gotten from you in My current trailer build I bought four SP-111275 7,000lbs springs off you as well as the APT3 spring hanger kit for my car trailer .. its running 2 6000lb axles...
Why Are Service Body Trailer Hitches Not Rated for Weight Distribution Systems
I recently purchases a draw tite ultra frame service body trailer hitch v-2inch weld on rated for 16,000 and 1600 and I need a weight distribution hitch for my trailer. I noticed after installing that the instructions say not for weight distribution...
Disc Brake Kit Availability Compatible with the Dexstar Conventional Steel Wheel # AM20766
I am looking for a rotor/caliper combination that works with the AM20766 wheel. What truck or trailer disc brake setup works with this wheel? | The Dexstar Conventional Steel Wheel # AM20766 has an 8 on 6-1/2 inch bolt pattern. To see a list...
Trailer Rim and ST215/75R14 Taskmaster Tire Recommendation
I am in search of a couple of spares... I need to know if I can deviate on one of them. I would really like to get a Taskmaster ST215/75R14 LR C on a silver mod rim 5 on 4 1/2 bolt pattern. Your site only shows white.... | Check out the Provider...
Trailer Tire Recommendation to Replace Size ST235/80R16
I currently have the following tires on my 44 ft fifth wheel toy hauler. Westlake -ST235/80R16E I have three axles rated at 7000 lbs each. I want to replace them with tires at least as good or better. What do you reccomend? Thanks, | I really...
Will a Reese Weight Distribution Shank Work with a Curt Weight Distribution System
I currently have Curt part #17300 and need more of a drop than the current shank will allow. I was wondering if this shank was compatible with part #C17307 that I have with my current setup. | The Reese weight distribution shank # RP54970 has...
Compressed Fender Clearance for Trailer Between Tire and Fender
I have seen this same question asked in different forms but it was never asked with this info. Im running 4 of these 7000 lbs sprins spring under axle and when fully loaded with a 6000lb Jeep the current fenders have 5-1/4inch of clearance...
Recommended Front Hitch And 2 Bike Platform Rack For 2014 Ford Super Duty 4WD
I need a front mount receiver hitch for a two bike, bike rack. I would prefer a lower mount which would allow better visibility from in side the pickup. Is there a possibility of a problem with front clearance? 2014 ford super duty 3/4 4wheel...
Parts Needed to Upgrade the Dacromet Calipers of # K2HR526D to Stainless Steel Calipers
I have a set of 12inch Kodiac disc brakes K2HR526D. Im planning on replacing the calipers KDBC225DAC with stainless steel calipers. KDBC225S. Since the original brake kit was designed for regular calipers is there an issue? For instance do I...
7-Way and 4-Way Combo Recommendation for a 1999 Ford F-250 with 4-Way
99 F250 Super Duty- I want to use something like Part #:HM40975 but need a wiring harness like Part #:118243 that will plug in without splicing wires. Dont see a part that fits my needs... | It sounds like your 1999 Ford F-250 has a factory...
Recommendation for Weight Distribution for 2009 Ford F-250 Super Duty Towing Horse Trailer
Hi there. Im pulling a horse trailer as well as carrying a Lance Camper. The truck does pretty well, but it does sag a bit. Can you make a recommendation as to what I might install for stability? Thank you | The Timbren Rear Suspension...
Weight Distribution Recommendation for 37 foot Forest River XLR 29KW Toy Hauler
Im buying a 37ft Forrest River XLR 29kw toy hauler with a hitch weight of 1515lbs. Im going to be pulling it with a 2016 F250 6.7 Powerstroke class 5 with 2 1/2 reciever. Not sure what all the weights will be loaded down and Im going to pick...
Are There Any No Drill Custom Installation Brackets for Curt 5th Wheel Hitch C16130
Hi I am looking at you Curt 20K 5th wheel hitch. It looks like it comes with a universal install kit. Do you have a vehicle specific install kit. I dont want to do any drilling. I have a 2008 Ford 350 dually with an 8foot bed. Thanks for you...
Filter Your Search
Contact and Help