Hub with Bearings that Fits BT8 2k Axle Trailer Spindle TRU94FR
I am building a small farm cart. Max capacity will be 4,000 lbs. can you give me a lto the bearings, hub, rim please that would work with this weld on spindle? Do you have a dimension for the length of the section that will be welded? Thx,...
Replacement Bearing Kit ad EZ Lube Grease Cap for Lippert 136214 Hub/Drum
Hello, I have a lippert 136214 10 inch drum 6 bolt. I need a new bearing kit with seals. I also need the easy grease cap, and wheel center cap. Thanks | According to my research your Lippert 136214 hub uses the same parts as a 3,500 lb hub...
EZ Lube Grease Caps for 8x8 Single Axle Trailer
what size ez lube bearing cap do i need. the old race box says L44610. the measurement of the bearing buddies is 2inch diameter as best i can measure. These are on a 8x8 foot single axle trailer | Based on the # L44610 race you have on your...
Needing to Find the Correct Bearing Buddies on 7,000 Lbs Trailer Axles
I recently purchased a new trailer that has bearing buddys. The axles are 7,000 lb and it is a triple axle. I like to keep spare parts on hand as I use the trailer extensively. I have used BBs before on a lot of trailers, this one is different....
Seal Recommendation for 5th Wheel Trailer with 5,200 lb Axle
need wheel seals for my 5th wheel i pulled the wheel and spindle off to see the number on the seal but did not see any numbers. | You will want to measure your spindle to make sure (see accompanying photo) but the double lip grease seal that...
Replacement For Dexter EZ Lube 85-1 Grease Caps
Can I send a picture of a dexter ez lube 85-1 cover that I need? I need the metal and rubber cover. Thanks | You definitely can send in photos of your Dexter EZ Lube 85-1 cover, but according to my research the Grease Caps # RG04-040 are what...
Grease Seal For Lippert 5,200 lb Axle
Recommended outer grease seal for bearings for Lippert 5200 6 lug axel. Going to pack bearings and need inner grease seals. | We do indeed have the correct grease seal for your 5,200 lb Lippert axle; I checked directly with them and can verify...
Availability of Trailer Hub that Fits Spindle with Bearing Diameters of .75 and 1.25 inch
I am trying to replace the hubs on an old trailer that was give to me. The inner bearing is a 1.25” Id and the outer bearing is a .75” id. Do you have a hub set that will work for that? | What you have is a pretty odd bearing combo but we do...
Parts Needed to Upgrade from a 2-3/8 Inch Axle to a 3 Inch Axle
Hi, I have a grand design imagine 2800bh trailer and i am looking for a new/replacement axle with spindles. It appears to be 86.5 hub face to hub face, and 68.5 spring to spring on center If i went to the 3 axle, what else would i need to...
Replacement Options For a Trailer Hub With Inner Bearing L44643 and Outer Bearing LM11749
I also have a hub with an inner bearing of l44643 race l44610 and an outer of lm11749/lm11710 WITH A 5 on 4.5 hub. seal # is 474276 Is there a replacement hub with bearings to fit this description??? all numbers given are national I cant...
Replacement Idler Hubs For Trailer w/Obsolete Spindle 1.255 Inch & 0.775 Inch Bearing Inner Diameter
What hubs will work for this trailer? I need a complete hub with bearings, seals, races included. Steel trailer @ 600 - 800 lbs empty weight 5 on 4.5 bolt pattern Spindle size see photos Meas A = 1.79 Meas B = 1.255 Meas. C = 0.775 Spindle...
Shorter Equalizer Solution for Trailer Where One Side of Equalizer Hits Frame
I recently purchased a used Kodiak 16foot utility trailer. I noticed the back tire being higher when I looked at the trailer. The seller had it on a highly lifted truck and I thought that was the issue. While rewiring the trailer and servicing...
Replacing Bearings, Races, Seals and Dust Caps on a 5th Wheel Trailer
Greetings, I plan to replace the bearings, race, seals and dust caps on my 5th wheel before spring. The axles are Dexter part number 4003321. Can you determine the spindle size and required parts without me taking the hubs apart? Thanks | Yes,...
Washers for BT8 Trailer Axle Spindle
Hi, I was wondering if you guys happened to sell spindle washers. I am looking for 2 washers for the BT8 spindle size. Please let me know. Thank you! | We do indeed carry a 1 inch inside diameter spindle washer for a BT8 spindle. The part number...
Troubleshooting Hub and Spindle Not Fitting Together after Replacing Spindle on a Utility Trailer
I expected to replace a hub easily. I bought a hub with 1 1/16 inner and outer bearings and a 1 1/4 rear seal. The main part of the spindle is 1 1/16 and the slightly larger shoulder near the welded area is 1 1/14. I expected that the...
What Trailer Hub Fits Outer Bearing # 14125A
I have a bearing with 14125a what size of hub do i need | The bearing number you referenced, # 14125A, is an outer bearing that will fit a number of different hub assemblies. Those compatible hub part numbers are # 42866UC3, # 8-219-4UC3 and...
Replacement Bearing Kit For Idler Hub 5 On 4.5 With 1 Spindle and 1.24 Inner Diameter Grease Seal
I have an old homebuilt trailer that Ive had for 8 years and Im not the original owner. The hub is 5 on 4 1/2, but Im not able to read the number off the outer bearing as it is so faded. I did not pull the seal or inner bearing. The bearings...
Spindle Replacement for 3500 lbs Axle
I recently had a spindle crack on a 3500 lb axel. The tube diameter is 3in. The only 4in spindle I can find is 2 3/8. Just wondering if you could help me. Thank you. | The TruRyde #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axles...
Difference Between Trailer Grease Seal Part Numbers RG06-070 and GS-2250DL
What is the difference between axle grease seals RG06-070 and GS-2250DL? They are the same OD and ID, both double lipped, have different cost. | The difference between the two part numbers you mentioned is the quantity of seals that comes with...
Recommended Spindle and Idler Hub for 2,000 Pound Axle
I need a hub and spindle. Are: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - AKIHUB-440-2-2K and Spindle TRU94FR compatible? | I do have a solution for you, however the etrailer.com Trailer Idler Hub Assembly AKIHUB-440-2-2K referenced...
Spindle and Wheel Recommendation to Fit with Trailer Rim AM20053
I am buying a wheel, hub and spindle- all need to fit together. Im getting an AM 20053 wheel I am getting a 555-35K hub for that wheel Does the wheel fit that hub and what size spindle does the hub need. I think it is a 1.5inch but I cant...
Recommended Electric Over Hydraulic System For Disc Brakes On Triple Axle Trailer With 7K Axles
Hello, I have a triple 7k axle trailer with electric brakes and I seem to always be replacing a wire do to a short, the spring and star wheel falls out, or a magnet goes haywire. I run a a hot shot and put about 130k miles on a trailer in...
Correct Wheel Bearings and Races for 3,500 lb Axle Based on Spindle Diameter?
The brakes are a Dexter 8-207 I thought they were 8-201 but I went back and looked on 5 on 4-1/2, 10 x 2-1/4 inch electric brake. The 8-201 matches better than the 8-207 when looking at hubs on the internet. This is an old Triggs dual-axle horse...
How To Determine If ST205/75R15 Tires Can Replace ST205/75R14 Tires On 1995 Travel Trailer
Hi I have a 1995 travel trailer. With a 205 75R 14. I would like to put 205 75R 15 radio trailer tires on the same axles that are on this trailer. Will there be a problem putting those 15 inch tires on this trailer thank you very much for your...
Filter Your Search
Contact and Help