Recommended #84 Spindle for a Hot Walker
Do you sell a spindle that matches this hub assembly? Im working on hot walker, not a trailer, so I have no current spindle. I just need the proper size spindle that matches this hub so I can weld in onto the hot walker. Thanks | The etrailer...
How to Find the Correct Idler Hub Replacement for Boat Trailer
I have hubs on my boat trailer with UFP # H-1062-3. Wheels are 5 hole-4.5, 13 inch tires. Trailer capacity is 1500 lbs by Lippert. Axle is 2 inch square diameter. Any idea on bearings or replacement idler hub? | In order to find the correct...
Changing Drum Brakes to Disc Brakes on Gooseneck Trailer
I want to change my goose neck drum brake to disc. What do i have to do to get the right ones | If you already have hydraulic drum brakes, then you will simply need a rotor and caliper kit for your axle capacity. For instance, if you have standard...
Availability of Ag Spindle with A=1.75 B=1.5 c= no c D=1.25 E=.75 F=3.75
I need an ag spindle with the following dimensions following your size chart. A=1.75 B=1.5 c= no c D=1.25 E=.75 F=3.75 | The closest agricultural spindle we have to what you are looking for is the part # TRU34FR which has A 1.75, B. 1.75, C....
U-Bolt Kit Similar to APUBR-8 But with Galvanized U-Bolts
I want to replace 2 leaf springs 4 leaves on my 5er. The appropriate spring is the UNA-111 5 leaves, thus I need new/longer U-bolts. The existing U-bolt is 3x6x1/2 therefore, the next longer one appears to be a 3x7x1/2. You have 4 possible...
Recommended Torque Specifications for U-Bolt # SP01-160 in a Slipper Springs Trailer Setup
What should these be torqued when used with the TRTP200175 plate and the SP-039275 springs on a 2x3inch square axle? | Since the # SP01-160 u-bolts are 9/16 inches in diameter the torque rating is from 65 ft/lbs - 95 ft/lbs. I have linked a...
Replacement Hydraulic Brakes, Hubs, and Bearing Kit For a 12,000LB VRSA Equipment Trailer
I own a VRSA tilt bed 12k equipment trailer with 16inch wheels and suspect the brakes need up graded. Do you carry replcement pads for this brand? | For the 6,000lb Lippert axles on your VRSA tilt bed trailer you currently have the Hydraulic...
Recommended Upgrade For 6-1/16" Long Equalizer TREQ310
I am looking to replace an eq 310 stock equalizer with a cushioned equalizer and welt bolt kit. Problem I am running into us eq 310 height at 4 inches is taller than say the Dexter EZ flex and narrower than the equaflex that Offers the same...
Can Trailer Hub Assembly AH60880FCOMP Fit Spindle That Uses Inner Bearing 25580?
Will this hub fit on a spindle that uses a 25580 inner bearing. | No, the Trailer Hub Assembly # AH60880FCOMP uses inner bearing # 506849 which has and I.D. of 2.165" where the # 25580 inner bearing your spindle uses has an I.D. of 1.750" meaning...
Recommended Replacement Spindle Or Axle For Older Spindle That Uses Short Hubs W/ L44643 Bearings
The spindles on the trailer are 1”, requiring 44643 inter and outer bearings, but I have a short spindle, and need a 3-1/2” hub. Is there a hub that will work. The other side is 4 on 4 lugs. | I have a few different options for you, but the...
Replacement Grease Seal for Dexter Trailer Hub 8-258
I have a 2017 Little Guy Trailer with 8-258 hubs and the EZ lube system. I am finding that the inner Grease seal for the 1 1/16 straight axel could have a 1.25inch I.D. seal or a 1.50inch I.D. seal which is correct and why the difference? Please...
Correct 5-Lug Hub for Square #84 Spindle TRU47FR
Will this hub fit onTruRyde spindle TRU47FR | The Trailer Idler Hub Assembly for 3,500-lb Axles part # AKIHUB-545-35-K is what you'll want to use with the Square #84 Spindle part # TRU47FR. |
Suspension Upgrade For Triple Axle Trailer With 33 Inch Axle Spacing & 3,500 lb Axles
Tri axle trailer suspension upgrade cre3000, E-Z Flex? Trailer has a frame axle spread of 95, 33WB, 25-1/4 inch center to center 1-3/4 inch springs, 3,500 lb axles underslung mounting, frame hangers 3-3/8, EQ310 equalizers 4 inch tall, 6.06...
Replacement Spindle for 3,500 lb Trailer Axle with 2-3/8 inch Diameter
I have a Dexter idler axle. It is 2 3/8 inch diameter. It has the arch/bow to compensate for load. Spindle is shot and needs replacing. Since there is no brake can I remove the existing spindle and brake plate and use a #84 replacement spindle?...
Replacement Axle and Brakes for 87 Inch Long 3,500 Pound Axle on Travel Trailer
Hello , I have a travel trail that needs a new axel. I have a pic the the serial# if that helps. 87 outside of hub, 68 1/2 to spring centers . Needs brakes as well, 3500 lb/5 on 4 1/2 bolt pattern. Thank you | Thank you for providing that...
Replacement Axle For Trailer With Obsolete DICO 15638 Brake Drum Assemblies
Im looking for a replacement drumb brake hub for the Dico 15638. The outer bearing is 3/4inch LM11949 and the inner bearing is 1-1/4inch LM67048. | You are going to have to replace your axle as the only hub we currently have that uses your bearings...
What is Spare Tire Lock Made of and Grease Cap for Trailer Hub
Is this made of metal or plastic? RG04-040: Hub OD measurement is different. The measurement inside my hub was 1.986 according to my calipers. Will this work with my hub? | To answer your first question, the Spare Tire Lock # FSTL0603 is made...
Recommended Hubs with 4 on 4 Bolt Pattern and Double Lip Seal for CE Smith 1.8K Trailer Axle Beam
Hello, I am interested in purchasing CE33201GA axel and the AKIHUB-440-20G-2K hubs and the RG06-020 double lip seals. Will these match up ? | The CE Smith Trailer Axle Beam part # CE33201GA has EZ-Lube Spindles so you will want to use the Trailer...
Replacement 60 Inch Long Axle with 49-1/2 Inch Spring Center for Boat Trailer
Hello I need a trailer axle assembly for a boat trailer. The current trailer has a 60 hub to hub and a 49 1/2 center to center on leaf spring. | Assuming you are looking for a 2,200 lb axle you can use the Trailer Axle with Idler Hubs - 5 on...
Replacement #84 Spindle for Dexter 3500-lbs Axle
Will this fit a dexter 3500# axle? I need to replace a spindle, bearings, backing plate, and drum. | As long as you've got a 3500-lbs EZ Lube axle then you can use the #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4"...
Troubleshooting Leaf Spring Fit on Top of the Axle on a Tandem-Axle Trailer
Tandem-Axle Trailer Hanger Kit for Double-Eye Springs Axel flip for more clearance after done both springs sit different is this normal?? | I assume by flip, you mean you moved the leaf springs to the top of the axle. If this is the case,...
Can 5-3/4 Inch Tandem Axle Equalizers be Replaced with 5-5/8 Inch Equalizers
I need to replace my equilizers. Mine are 5 3/4 wide. The complete kit you sell is 5 5/8. all other measurments are the same. Will it work??? | The Tandem-Axle Equalizer Kit, # AP233, will work as long as all other measurements are the same....
TruRyde 10-36 Replacement Spring Recommendation for a Dexter Seal K71-305-00
I am looking for a replacement seal for Dexter seal K71-305-00 which is a spring loaded seal has a garter spring to keep lip against the spindle. Does your Code: RG06-070 seal contain a garter spring? | Yes, the Grease Seals 10-36 # RG06-070...
What Axles Would the Trailer Hub # 8-213-5UC1 Fit
I am looking for a technical drawing with dimensions and a 3D model, if available, for the 8-213-5UC1 Trailer Hub Assembly - 5,200-lb and 6,000-lb Axles - 6 on 5-1/2 What axle is recommended for these hub assemblies? I am designing a custom...
Filter Your Search
Contact and Help