Can Trailer Hub Assembly AH60880FCOMP Fit Spindle That Uses Inner Bearing 25580?
Published 09/21/2021
Products Featured in This Question
Question:
Will this hub fit on a spindle that uses a 25580 inner bearing.
asked by: Joe
0
Expert Reply:
No, the Trailer Hub Assembly # AH60880FCOMP uses inner bearing # 506849 which has and I.D. of 2.165" where the # 25580 inner bearing your spindle uses has an I.D. of 1.750" meaning these bearings are not interchangeable.
There are quite a few hub assemblies that do use the # 25580 inner bearing you mentioned so I link a page showing all of these hubs, but if you can tell me the bolt pattern of your current wheels I would be happy to make a recommendation for you.
expert reply by:
Samuel C
0
Product Page this Question was Asked From
Trailer Hub Assembly - 8 on 8" - 6,000 lb
- Trailer Hubs and Drums
- Idler Hub
- Agricultural
- 506849 / 501349
- Standard Grade
- For 6000 lbs Axles
- 5/8 Inch Stud
- 8 on 8 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- TruRyde
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement Bearing Kit for a 4400lbs Axle on a
- Article: Adding Electric Over Hydraulic Disc Brakes
- Q&A: Replacement Hubs for 2000 Dutchman Voyager Pop-Up Camper
- Q&A: Is Silicone Sealant Required When Installing New Seal on Trailer Hub
- Q&A: Differences Between Combined Hub & Rotor and Separate Hub & Rotor Brakes
- Q&A: Pilot Diameter for etrailer Hubs # AKIHUB-655-6-K and # AKIHUB-865-7-2-K
- Q&A: Difference Between Bearing Buddy 2047 and 2047SS
- Q&A: How to Lift 2025 Keystone Coleman 17B
- Article: Determining Trailer Tongue Weight
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Tell the Weight Rating of a Trailer Axle