Correct Blue Ox Avail Tow Bar To Roadmaster Direct-Connect Base Plate Kit Adapter
I need an adapter to connect the Roadmaster 458-1 mounted on a 97 Ford F-250 Supercab 4x4 diesel to a Blue Ox Avail tow bar BX7420. The QandAs fir the base plate discuss using a BX88185 adapter. Im confused however because the Blue Ox Avail...
Brake Controller Wiring Or Plug-In Adapter Recommendations For 1997 Ford F-250 And 2015 Ram 1500
I have a Tekonsha Prodigy P2 trailer brake controller. Do you have a adapter that will plug into this control and a early1997 Ford F-250 heavy duty also a adapter that will plug in this controller and a 2015 Ram 1500 Tradsman? Thank you |...
How To Carry Kayaks On a Camper Shell
I have a trac rac ladder rack on my 1996 f250. older version before Thule to over. I purchased a Leer canopy and cannot install the trac rac with the canopy on. I still need to haul my kayaks on top and want to use the t bar since my Malone...
Rear Suspension Enhancement for 1997 Ford F-350 Powerstroke Towing 50-ft Gooseneck Trailer
As of right now truck has a 6 inch lift with 37 inch tires and your curt hitch which had a great and simple install thanks again. But now the truck rear end sags a good amount and I dont think thats safe for steering and possible bumps on the...
Recommended Curt 5th Wheel Install Kit for a 1997 Ford F-250 Heavy Duty
Hi: Looking for the correct brackets for a 1997 F250HD. I think it is c16437. Thank you | I do have an option for you but they do not offer a truly custom fit 5th wheel install kit for a 1997 Ford F-250 Heavy Duty. I recommend you use the Curt...
Can Rhino-Rack RT Roof Rack Tracks Be Cut And Bent To Fit Curved Roof?
Are the end-caps removable to allow the tracks to be cut to size? I see only options that are slightly too long, or too short for my application. Are the tracks flexible enough to align with a slightly convex roof profile? | Yes, roof rack...
Highest Number of Axles Brake Controller Will Work With
I have a bogie style trailer with 12 wheels that have 12 sets of 12 inch brakes. Will I need a special controller to run these brakes? Also wondering what size wire I will need to run to the brake assemblies. | There is a specific type of brake...
Hardware Included With The Brophy Stake Pocket Mounted Camper Tie Downs # TDSF
Can you tell me what size bolts and screws come with this product: Brophy Stake Pocket Mounted Camper Tie Downs - Bed Mount - Black Powder Coated Steel - Qty 4 Item # TDSF Thank you. | The Brophy Stake Pocket Mounted Camper Tie Downs # TDSF...
Are Spacers Needed to Install Reese 5th Wheel Universal Base Rails on a 1997 Ford F-250 Long Bed
install a 5th wheel hitch on my 97 ford f250 long bed do spacers need to be installed between the bed and the frame? if so, should they be aluminum or stainless? | You will not need spacers to install the Reese Universal Base Rails and Installation...
Hitch And Installer Recommendation for 2004 Nissan Murano
Hello! Okay, it starts like this. We, my mother and I have a Murano, Nissan 2004. Its only got like 27,000. Miles on it. We are in need of a tow hitch for this car mention above. We, my mother and I are Moving to S,Carolina. We are leaving...
7-Way Recommendation for 1997 Ford F-250 for Bed of Truck
I have a 1997 f250hd and cant find the right harness to tie into my existing harness so i can put a plug in the bed. Do yall make one for it? Thanks | For a 7-way to install in the bed of your truck to make connecting your trailer lights easier...
Fifth Wheel/Gooseneck 7-Way Recommendation for 1997 Ford F-250
I am looking for a 7 way 90 gooseneck harness, for my 1997 F350 super duty. Part # 50-97-410-010 comes up, but says it may not work. Can you please verify? I watched a install video and your product is exactly what I need. Thank you | We had...
How to Tell if 1997 Ford F350 Has Overload Springs
I have a 1997 F350 crew cab diesel. It is 4wd and has firestone levelers installed. How do I know if it has overloadinch springs? Is the higher bed height on my 4wd an issue with a gooseneck hitch? Looking at the BW thank you | If you look...
Recommendation for T Kit Wiring Harness to Add 7 Pin Connector to Bed of 1997 Ford F-350
I have a 97 F350 diesel crew cab old body style with a 7 pin trailer connector connected to the factory harness. Is there a tee kit to add another 7 pin connector in the bed for a 5th wheel? | If the back of the 7 way on your 1997 Ford E350...
Installation of B&W Turnoverball Gooseneck Hitch Lowering Exhaust on 1997 Ford F-250 or F-350
BandW turnover hitch assembly. Do you have to lower the rear exhaust bracket behind the rear end? | The B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs Item # BWGNRK1110 is only for overload springs...
Using a Curt A20 Slider for a 1997 Ford F-350 8 Foot Bed with Cab Wing Mounted on Bed
I have a 1997 Ford F350 Conversion Crew Cab Dually. My truck has a wing on it just behind the cab mounted to the top of the bed. This wing goes to the top of the roof and then back down on the other side.I have the universal rail kit mounted...
Will CIPA Mirrors for 1997 Ford F-250 Help When Towing 8-1/2 ft Wide Trailer
Will these mirrors work if towing a car trailer 8 1/2 ft wide? They will be going on a 1997 Ford f250. Thanks, | An 8-1/2 foot wide trailer is pretty wide but the tow mirrors part # CM11000-2 are going to help quite a bit to see behind your...
Attaching the Titan Hydraulic Brake Line When Using Fulton Fold-Away Coupler
Hi. Im looking to order a 3 x 5 foldaway hitch bracket and had a question to ensure that I order everything I need to go with it. Your description states that I should also get the Titan Hydraulic Brake Line with Fittings - 25 Long. My question...
Why Wont the Hollywood Racks Sport Rider Bike Racks Work On a 5th Wheel Trailer
I have purchased an E bike rack from you. Sport rider SE2 and noticed its not recommended for a fifth wheel trailer. Why? Was looking at the Hollywood web site and checking out the RV Rider and I got confused when I ordered your SE2. I think...
Installing the B&W Turnoverball Underbed Gooseneck Hitch on a 1997 Ford F-350 with Duraliner
Will the BandW Gooseneck trailer hitch work with a Duraliner -in bedliner? | You will have no problem installing a B&W Turnoverball gooseneck hitch in your 1997 Ford F-350 with the Duraliner bedliner. You will have to cut through the bedliner...
Will Draw-Tite Trailer Hitch from 1990 Ford F-350 Fit 1997 Ford F-150
Will a Drawtight trailer from a 1990 Ford F-350 truck fit on a 1997 Ford F-150 Truck? | All of the Draw-Tite trailer hitches for a 1990 Ford F-350 will fit a 1997 Ford F-250 or F-350 but only certain ones will fit the 1997 Ford F-150, like part...
Recommended Gooseneck Hideaway Ball Hitch for 1997 Ford F-350 Cab and Chassis with 34 Inch Frame
I have a 97 f350 cab chassis with 34 inch frame and I need a hideaway ball gooseneck hitch for it I can’t seem to find anything ? | I reached out to my contact at B&W and have a solution for you. Although none of the manufacturers we carry...
Recommended 5th Wheel Hitch and Install Kit for a 1997 Ford F-250HD
Will this hitch install on a 1997 F-250HD longed. Are there custom brackets available for this truck, it does not have overload springs. Thank you | Yes, the Curt E16 5th Wheel Trailer Hitch w/ Rails and Universal Installation Kit part # C16116...
Should 12V Power on 1997 Ford F-250 Shut Off with Ignition on Aftermarket 7-Way
1997 Ford F-250 7.3 Diesel When wiring up the 7 plug connector for a trailer with brakes, should the 12V terminal be connected to 12V always on, or 12V with ignition on? My trailer has 12V lights inside, so I am not sure how they are suppose...
Filter Your Search
Contact and Help