Will The Curt Adapter C35FR Work On A 2024 Audi Q8
Will this work properly on a 2024 Audi Q8 eTron with the factory towing package? I’d like to use it with a kayak trailer that has a 4 pin connector and LED lights. Thank you | Yes, the Curt adapter # C35FR is exactly what you will need to use...
Will E-Z Flex Heavy Duty Rubber Suspension System Affect Ride Height
So I did all my measurements on my trailer to use these to replace current stock ones. One question I have does it lower or raise the height of the trailer at all? The reason I ask is because my stock measurements are 6 1/4 between mounting...
Will Wheel Chock # RA-17 Accommodate Motorcycle Tire 23 inches in Diameter
What tire sizes will this chock accommodate? What wheel chicks do you have that will accommodate a 23” diameter tire? | A 23 inch diameter motorcycle tire would not be an issue at all for the Rack'Em Manufacturing Removable Wheel Chock # RA-17...
Weight Of The MORryde 20"x48" And 20"x60" Sliding Trays For RV Cargo Compartments
20x48 and 20 x 60 steel cargo tray How much do these weigh each ? thx | The MORryde Sliding Tray for RV Cargo Compartment - 48" x 20" - 800lbs - 1 Way Item # MR94FR weighs approximately 70lbs and the MORryde Sliding Tray for RV Cargo Compartment...
Dimensions of Replacement Right Rear Leg for Lippert Ground Control Leveling System
Hello What is the overall dimensions of this model? Thank you for your time and have a great weekend. | The Replacement Right Rear Leg for Lippert Components Ground Control 3.0 Electric Leveling System- Qty 1 # LC344792 has the following dimensions:\ 99...
Class III Trailer Hitch for a 2006 Ford Freestar
I need a class 3 trailer hitch for a 2006 Ford Freestar. It is a 2 wheel drive. Will I need to remove or drop down the exhaust system to install the hitch? | For your 2006 Ford Freestar I recommend going with the Curt # C13587 as we've found...
Hitch Confirmed to Fit a 2022 Audi Q8
Is there a hitch option for the 2022 Audi Q8? | There is. The Stealth Hitches Hidden Rack Receiver # 391AUDQ818 is confirmed to fit all models of the 2022 Audi Q8. This hitch is made in the USA, has a bolt-on, no-drill installation and will...
Can Tiitan Chain Tire Chains # TC339DC be Used on Highway or have Snow Depth and Speed Requirements
Approved highway? Limitations speed,snow depth etc.? | Titan Chain Tire Chains # TC339DC meet DOT requirements in all states for any roadway on which chains are required and/or can be used but aren't required by law. There isn't a specific minimum...
Recommended Bearing Buddy Kit For The etrailer Trailer Idler Hub Assembly # AKIHUB-545-35-K
I bought model no 1938 buddy bearings which turned out to be the wrong size the hub assembly is akIhub-545-35-k please tell me what size I need thanks for your help | The Trailer Idler Hub Assembly for 3,500-lb Axles # AKIHUB-545-35-K has a...
Will Bulldog Powered Drive Kit Fit a Fulton 12K Magnum Jack
Is this Bull Dog Powered Drive kit compatible with a Fulton Magnum Series Heavy Duty 12,000 Lb. Capacity Leg jack. Use is horse trailer with living quarters. Currently manual crank. | Bulldog Powered-Drive Kit # BD1824200100 comes with the...
Front Mount Trailer Hitch Receiver for a 2006 Lincoln Mark LT
Will this hitch fit on 2006 Lincoln Mark LT without any modifications? | The installation instructions for Curt front mount receiver # 31352, see link, do not specify any vehicle modification for installation on your 2006 Lincoln Mark LT. But...
Troubleshooting Running Light Circuit of Curt Trailer Wiring # C56673 Not Functioning
I connected the wiring harness to the factory connection on my 2006 Ford Freestar, installed the relays and fuses and then connected the trailer. The running lights did not work, all of the lights flashed when the right turn signal was operated,...
Trailer Hitch Extension for 2 Inch Hitch on 2019 Audi Q8
I have a new vehicle Audi Q8 with trailer ability factory installed. I tow a double jet ski and want to prevent the rear wheels from going in the salt water. I would use the device only on the ramp and not to tow on roads. I was hoping a 36...
Curt T-Connector Trailer Wiring Harness Recommendation for a 2005 Ford Freestar
2005 Ford Freestar 4.2l - Limited - no factory tow package I just returned a differnt Curt T-Connector to my auto parts store after finding the plastic design around the T-Connector did not fit in my tailight connector piece despite the products...
Aluminum Ball Mount and Cushioned Hitch Ball for Use with 2021 Kia Telluride
I have 2021 KIA Telluride I have purchased a receiver form you guys and I need to get ball mount and my measurements are 14.25 at the the receiver and the trailer level is 16.0 that being said puts me at 1.75 of rise so I round that up I guess...
Will The Draw-Tite Trailer Hitch # 36318 Fit All Years of Ford Freestar
Will hitch #36318 fit all years of Ford Freestars ? | The item you selected, Draw-Tite Trailer Hitch, part # 36318 will fit all model years of the Ford Freestar which range from 2004-2007. This hitch will also fit the 2004-2007 Mercury Monterey....
Suspension Enhancement Comparison for 2006 Lincoln Mark LT, Timbrens or Air Bags
Im looking at getting a new light weight truck camper will these work or should I use air bags? Im confused on whats the difference. Thank you | For your 2006 Lincoln Mark LT the Timbren kit part # TFR150D is a confirmed fit that will work well...
Is the Screw Included With Wiring Harness C56673 Necessary on 2007 Ford Freestar?
What is the screw for? C56673 | I spoke with a representative of Curt who told me that the screw that is included with the Curt T-Connector Vehicle Wiring Harness # C56673 that fits your 2007 Ford Freestar is not needed and it can just be thrown...
Floormats For 2006 Ford E450 Motorhome
Looking for floor mats for my 2006 E450 motorhome | Yes, we do. These are a confirmed fit # WTW51 for your E450 motorhome. If you wanted tan # WTW51TN or grey # WTW51GR we have them too! |
Correct Trailer Ball for Draw Bar Included with Curt Class II Recevier Hitch for 2004 Ford Freestar
I want to put a 2 ball on this how long of shank and shank diameter does the ball mount take? Thanks Randy | The ball mount included with the Curt Class II Receiver would use a trailer ball with a 3/4 inch shank. The shank needs to be at least...
Can 1,500 lb Trailer Axle be Swapped for 3,500 lb Axle
Good day I have a 10x7 utility trailer with 1500 lb axle with no brakes or brake flange. I was wondering if I could swap out the 1500 lb axle with a 3500 lb axle with electric brakes? The trailer frame seems to be made out of angle iron, not...
Trailer Wiring Plug Location to Install Wiring Harness # C55673 on a 2006 Ford Freestar
Hi, My van is 2006 Ford Freestar SE. I bought kit #56673. I could not find the minivans connector to plug in with new #56673. Where is it? Thank you in advance. | The plug on a 2006 Ford Freestar to install the Trailer Wiring Harness,...
Troubleshooting Tekonsha Prodigy RF Not Pairing To 2020 Audi Q8
Hello I am having trouble connecting my prodigy rf to my audi q8. The trailer directly connects to the car with no issue and lights all function, but I cannot pair the controller. I saw a post recently However, I am wondering that since the...
Recommended Wiring Harness for a 2005 Ford Freestar
I have a 2005 Ford Freestar without factory tow package. I am in need of a kit to hook up a trailer with LED lighting. Do you carry such a product? | If you have a wiring harness that was installed by splicing into your 2005 Ford Freestar's...
Filter Your Search
Contact and Help